Data Acquisition

Offers fiber optic isolation for high...

The 7600 Isolated Digitizer is based on the fourth generation of fiber-optic isolated digitizers designed by...

...

...

...

...

...

...

For timing and sequence control of switchgear or ballistics...

The Isolation Amplifier BE560 is a complete stand-alone isolated amplifier of modular construction for professional low and medium voltage measurement...

A rugged and robust hardware system for recording raw time data to an SDHC memory card independently of a PC or...

The distributed amplifier system for structural testing and experimental stress analysis! The CANHEAD amplifier system can be installed directly at the measuring points. Thus, it reduces wiring expenditure, while at the same time offering an...

CANHEADdirect: Small investment, high...

DMP41 is the most precise amplifier in the world for strain gauge-based measurements. The DMP series has been continuously developed by HBM for more than 30 years. It offers outstanding long-term stability and ultra-modern, user friendly functions,...

The SoMat eDAQ Bridge Layer (EBRG) offers 16 simultaneously sampled low level differential analog inputs through independent connectors. An extremely versatile layer; the Bridge Board works with both amplified and unamplified transducers including:...

The SoMat eDAQ Vehicle Network Communications Layer (ECOM) offers (3) CAN device interfaces, (1) Vehicle Bus Module (VBM) interface and a GPS communications port. It is an extremely versatile layer providing a direct correlation between vehicle bus...

The ECPU-PLUS is the processor for the eDAQ stand-alone mobile data acquisition system. Onboard memory stores the data until test is completed which is downloadable to a PC for analysis. Tests may include minutes of data, or even days of data while...

Whether you’re a new customer looking for the ultimate in rugged data acquisition, or an existing eDAQ customer looking to upgrade your current system, the eDAQXR is the right solution for your harsh environment testing. It is the perfect tool...

The SoMat eDAQ sets the standard for rugged, mobile data acquisition; a stand-alone sealed system designed for testing in the harshest of...

The eDAQlite is the go anywhere, test anything compact version of the SoMat...

The SoMat eDAQ Digital Input/Output Layer (EDIO) is an extremely versatile layer that can measure digital inputs/outputs, pulse counters, quadrature decoders, vehicle bus, as well as GPS. The EDIO offers twenty four channels that can be used as...

The SoMat Precision GPS (EGPS-200) is a GPS receiver designed for non-contact speed measurements in professional vehicle testing applications such as braking, acceleration and general vehicle...

The SoMat eDAQ Simultaneous High Level Layer (EHLS) offers 16 simultaneously sampled high-level differential analog inputs through independent connectors. Up to four EHLS layers can be added to a single eDAQ system enabling up to 64-channels....

The SoMat eDAQ Isolated Thermocouple Layer (EITB) measures temperatures on 8-channels of isolated thermocouple signal conditioning. Thermocouples come in several styles of dissimilar metals, or calibrations; and the EITB is available in the four...

The Somat eDAQlite Bridge Layer (ELBRG) offers four simultaneously sampled low-level differential analog inputs through independent connectors. An extremely versatile layer; the Bridge Board works with both amplified and unamplified transducers,...

The Somat ELCOM Vehicle Network Communications Layer (1-ELCOM-2) offers three dedicated CAN device interfaces, a vehicle bus module (VBM) interface and a GPS communications port designed to work with Somat GPS...

The SoMat eDAQ-lite Base Processor (ELCPU) is the foundation eDAQ-lite systems are built...

The SoMat eDAQ-lite Digital Input/Output Layer (ELDIO) is an extremely versatile layer that can measure digital inputs/outputs, pulse counters, quadrature decoders, vehicle bus, as well as GPS. The ELDIO offers eight channels that can be used as...

The SoMat eDAQ-lite Simultaneous High Level Layer (ELHLS) offers 4 simultaneously sampled high-level differential analog inputs through independent connectors. Up to eight ELHLS layers can be added to a single eDAQ-lite system enabling up to 32...

The SoMat eDAQ-lite Non-Isolated Thermocouple Layer (ELNTB) measures temperatures on 16-channels of non-isolated thermocouple signal conditioning. Thermocouples come in several styles of dissimilar metals, or calibrations; and the ELNTB is...

The SoMat eDAQ Non-Isolated Thermocouple Layer (ENTB) measures temperatures on 32-channels of non-isolated thermocouple signal conditioning. Thermocouples come in several styles of dissimilar metals, or calibrations; and the ELNTB is compatible with...

Main processor layer for eDAQXR-lite...

The Torque/RPM adapter enables the connection of HBM’s T12, T40B or similar torque transducers to GEN DAQ mainframes. The use of differential signals improves the immunity to external disturbance especially when using long cables in electrically...

The isolated Digital Event Adapter provides...

GEN16t is a robust rack mount...

Rack mountable, 17 slots, with data streaming up to 100...

Perfect for portable use, with low channel counts or applications that require a distributed...

A powerful and fast portable transient data...

A powerful high speed DAQ designed for installation in control...

The GEN4tB is a universal transient recorder & data acquisition mainframe with 4 slots for input boards and high data throughput. Perfect for high speed acquisition with moderate channel count in the field, in the lab, and in the test...

Genesis HighSpeed mainframes are the indispensable basis for our versatile and extremely powerful data acquisition systems and provide all the features expected from a transient...

Rack mountable, 7 slots, with a data transfer rate of 400...

Genesis HighSpeed is the modular platform for fast measurements of electrical and mechanical parameters. A transient recorder, data recorder and data acquisition system – all in...

The power analyzer card offers three power channels, each one consisting of one voltage input and one current (or voltage) input. It is specially designed for efficiency measurements in inverter-driven electric drive systems and all tests in...

16-channel universal input with sample rate of 500...

The power analyzer card offers three power channels, each one consisting of one voltage input and one current (or voltage) input. It is specially designed for efficiency measurements in inverter-driven electric drive systems and all tests in...

32-channel accel input...

32-channel accel input...

6-channel isolated balanced differential inputs up to...

Isolated balanced differential inputs up to...

High speed DAQ cards 25 MS/s or 100 MS/s or 250...

The GEN DAQ Basic/IEPE ISO 2 MS/s...

GEN DAQ Basic/IEPE ISO 200 kS/s Input Card is a general purpose signal...

8-channel universal input with sample rate of 500...

The High Voltage impulse attenuator together with the ISOBE5600 transient recorder and the Perception High Voltage Impulse Analysis option (HV-IA) form an application specific measurement solution. Together the three components offer a cost...

This complete solution simplifies your job of measuring impulse noise, providing all the hardware and software required in one easy to use package and a simple setup procedure and...

Measurement system with integrated optical...

Transmission system with integrated fiber-optic...

...

The MGCplus is the ultimate scalable and configurable data acquisition system for laboratory and test stand...

Remote, fiber optic front end for the Genesis...

A portable, all-in-one analyzer for fast sound and vibration analysis in the field, laboratory or production...

The QuantumX data acquisition system (DAQ) is the perfect tool for all of your test and measurement needs. For reliable data acquisition of different physical quantities and sensor technologies, QuantumX is the preferred choice. It has the unique...

Accessories for the QuantumX data acquisition...

Backplane for integrating max. 9 QuantumX modules. Additional modules can be connected by FireWire. Backplane for wall or control-cabinet...

The BNC-to-SubHD adapter can be used to connect IEPE/ICP sensors or ±10V signals with a BNC connector to QuantumX...

Internal data storage of all the signals of the connected QuantumX/SomatXR modules | Stand-alone recording in a robust data format, export to other...

The QuantumX CX27C gateway module is the key to many different measurement chain configurations - without compromise. It enables both time-synchronous metrological analysis of the test specimen and integration with test bench automation und...

Clip connectors for fast mounting of QuantumX on top of or next to each...

16 channels of Current-fed piezoelectric transducers (IEPE, ICP), Voltage and...

16-channel amplifier for Type K thermocouple...

16-channel amplifier for Type T thermocouple...

strain gauge full or half bridge, quarter bridge (120 or 350 ohm completion...

strain gauge full or half bridge, quarter bridge (350 or 1000 ohm completion...

2-channel module for precise measurement of SG-full-bridge transducers with accuracy of 25...

QuantumX 4-channel module for electrically isolated voltage measurement up to...

QuantumX 4-channel, highly dynamic universal amplifier | Measure sensor signals up to 200...

QuantumX 4-channel bridge module for precise measurement of strain-gauge-full-bridge-based transducers (dynamic,...

QuantumX 4-channel universal...

QuantumX 4-channel, highly-dynamic digital module for the acquisition of torque, rotational speed, angle, position, and displacement up to 100...

4-channel CAN module for the acquisition of CAN signals or integration of the QuantumX family into...

4-channel CAN FD module for the acquisition of CAN signals or integration of the QuantumX family into...

8-channel thermocouple amplifier for insulated and reliable thermocouple measurements in an electrical...

QuantumX 8-channel universal...

Module with 8 analog voltage outputs (± 10V) for real-time output of any sensor...

Module with 8 analog voltage outputs & 32 digital...

The new QuantumX MXFS BraggMETER is both an optical interrogator and an integration toolkit for the reliable QuantumX DAQ system. It offers 8 connectors for 16 channels each totaling impressive 128 channels per...

The adapter enables electric voltages up to 300V (CAT II) or up to 500V (non-CAT) to be reliably measured using a QuantumX universal...

SCM-SG120/350 - Quarter bridge adapter for measuring single strain...

The adapter can be used to connect thermocouples with thermo-Mini connectors. The SubHD connector comes with an integrated cold junction...

The plug-in cold junction can be used for measurements with thermocouples with the MX840 or MX440 universal...

The module guarantees an uninterruptible power supply (UPS), for ex., for buffering power drops of up to 80s in a broad temperature range...

The SoMat Strain SMART Module (SMSTRB4-xxx) is a part of a family of signal conditioners for the eDAQ and eDAQ-lite HLS layers. The Strain SMART Module provides excellent strain gage signal conditioning with support for 1/4-, 1/2- and...

The Somat E-AC/15 Power Supply (1-E-AC/15-2) is designed to provide 15 volts DC from a standard 120-volt AC input to a SoMat eDAQ or eDAQlite...

The EXRCPU is the processor for the stand-alone mobile data acquisition system, and is considered the workhorse for the eDAQXR platform. Data from various inputs are stored onboard and can be downloaded after the test is completed. Tests may include...

SomatXR CX22B-R – Ultra-Ruggedized Data Recorder for Interactive Vehicle...

The SomatXR CX27C-R Industrial Ethernet gateway enables the integration of SomatXR modules into a measurement chain, which can also be simultaneously acquired in real time. It is perfectly suitable for both simple and complex development test...

This Ethernet switch enables SomatXR and QuantumX modules to be connected to and synchronized with a PC or data...

Supports all electrical and active sensors | For sensors with current and voltage output incl. IEPE | 16 channels with automatic sensor...