Strain Gauges

ABM75 aluminum foil with kneadable putty is an easy-to-use strain gauge covering material. The product consists of a 0.05 mm thick aluminum foil coated with 3 mm thick kneadable putty. ABM75 is simply pressed by hand onto the measuring...

Accessories for optical measurement...

AK22 is a tough, kneadable putty that adheres to virtually any material. The putty is kneaded by hand onto the measuring point. It is recommended to use AK22 covering putty along with ABM75 aluminum foil, or even with a third layer of SG250 silicone...

BCY01 is an activator for the Z70 cyanacrylate adhesive. The curing of Z70 depends on the chemical state of the parts to be joined. There are conditions where curing may take place slowly or even remain incomplete; such as dry air (relative humidity...

The C Series strain gauges are the ideal choice for structural tests at exceptional temperature conditions. They have an enormous temperature range and measure precisely even at very low temperatures down to -269 °...

Our range of cables, stranded wires, and wires can provide you with the right accessories for the wiring of strain gauges; for instance, they can be utilized in the internal wiring of strain gauge bridges or for connecting through strain gauges to...

DY strain gauges have two measuring grids arranged parallel to each other. Typical applications for these strain gauges (SGs) include measurements on bending...

catman®AP - EasyOptics - Professional data acquisition software using optical strain...

EP150 is an easy-to-handle, hot-curing adhesive that is used in the process of strain gauge installation. In addition to being applied by a brush (included in the screw cap), EP150 can also be sprayed on. It is suitable for high ambient temperatures...

EP310N epoxy resin adhesive consists of two components and cures under heat and pressure. It is suitable for strain gauge installation for experimental tests usage, with extended temperature requirements and for transducer...

G Series - Optimum strain gauge for the manufacture of transducers, for smaller...

The KFU series of strain gauges are the ideal choice for structural tests at exceptionally high temperature conditions rising up to 350 °C. Typical applications include strain measurements on autoclaves or steam...