Often sensor signals are very low-level, and need amplification to be transmitted long distances or level correction to be able to be measured with digital displays, data recorders, data acquisition and/or SCADA systems. Other functions of signal conditioning include: isolation, filtering, and sensor excitation or digital and wireless interfaces. We offer sensor specific signal conditioning from multiple vendors so you have maximum flexibility based on your needs. We have the signal conditioning solution to improve your unique application!
140 Inline Amplifier
The Model 140 is a remote in-line DC amplifier designed to be used with bridge-type mV output transducers. The amplifier features five user selectable gain settings with a gain accuracy of ±0.5% and offers a wide bandwidth to 100kHz. The model 140...
142A Strain Gauge Amplifier
The Model 142A is a remote in-line strain gage amplifier designed to be used with ¼ bridge strain gage instruments. The amplifier features five user selectable gain settings with a gain accuracy of ±0.5% and offers a wide bandwidth to 100kHz. The...
500 In-Line Signal Conditioner
Model 500 is a small sized, DC powered in-line signal conditioner with 9-pin connectors. Available outputs are ±5V and 4-20mA with a 1000Hz...
BSC4 Multi-Channel Bridge Amplifier & PC Interface Module
Model BSC4 4-Channel Bridge Amplifier comes with either a USB Interface or a bridge amplifier option. This product can be used with any mV/V input sensors including our Model 3AXX series 3-Axis Load Cells. The bridge amplifier option comes with...
BX8-AS 8-Channel DAQ Amplifier
8-Channel amplifier for Strain gage, mV/V, ±10VDC, or PT 1000 temperature inputs. It is ideally suited for use with 6-axis sensors requiring axis load calculations. The BX8-AS has an industrial enclosure and 24-pin M16 connectors or screw...
BX8-HD15 8-Channel DAQ Amplifier
8-Channel amplifier for Strain gage, mV/V, ±10VDC, or PT 1000 temperature inputs. It is ideally suited for use with 6-axis sensors requiring axis load calculations. The BX8-HD15 has an laboratory enclosure and 4 x HD 15-pin DSub...
BX8-HD44 8-Channel DAQ Amplifier
8-Channel amplifier for Strain gage, mV/V, ±10VDC, or PT 1000 temperature inputs. It is ideally suited for use with 6-axis sensors requiring axis load calculations. The BX8-HD15 has an laboratory enclosure and 4 x HD 44-pin DSub...
CLIP Analog Amplifier for Industrial Applications
Analog Amplifier for Industrial Applications. Clip is available until the end of 2019 and is being replaced with the new and precise signal conditioner...
ClipX Industrial Signal Conditioner
With an accuracy class of 0.01 and an integrated calibration certificate, the interference-proof signal conditioner ClipX is setting new standards in industrial process...
CSC and LCSC Inline Signal Conditioners
Model CSC and LCSC signal conditioners have a wide variety of signal conditioning options come installed and calibrated to your choice of load cell and...
DF30CAN digiCLIP Digital Amplifier
The model DF30CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor...
DF30DN digiCLIP Digital Amplifier
The model DF30DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor...
DF30DP digiCLIP Digital Amplifier
The model DF30DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor...
DF31CAN digiCLIP Digital Amplifier
The model DF31CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital...
DF31DN digiCLIP Digital Amplifier
The model DF31DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital...
DF31DP digiCLIP Digital Amplifier
The model DF31DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital...
DIG-USB USB Output Module
The DIG-USB product is a compact, high-precision Strain Gauge Converter; converting a strain gauge sensor input to a digital output and is connected to a PC via a USB port. This product allows high precision measurements to be made and communicated...
DIG-USB-F Fast USB Output Module
The DIG-USB-F product is a compact, high-precision Strain Gauge Converter with up to 4,800 samples/second; converting a strain gauge sensor input to a digital output and is connected to a PC via a USB port. This product allows high precision...
digiCLIP Digital Amplifiers
Whether it is force, pressure, torque, or load — the digiCLIP modular signal conditioning system acquires signals in production and process monitoring quickly and...
DMA2 Signal Conditioner
Model DMA2 is a DIN rail mountable signal conditioner with user selectable outputs of ±10V, ±5V or 4-20 mA. This product is 10-28VDC powered suitable for battery or automotive use. It also features 1000 Hz bandwidth and push-button shunt...
EICT Signal Conditioning Module
The EICT signal conditioning module has been specifically designed to operate with the ICT and SLT190 range of contactless linear position...
IEM-422 Current Transmitter
The IEM 422 is a line powered current transmitter designed for industrial process control applications. The unit consists of a power supply and LVDT conditioner module pre-set to supply a 4 to 20 mA output from a 115 or 230 volt AC supply. The IEM...
INF-USB3 USB Single Channel PC Interface Module
Model INF-USB3 PC Interface Module makes any Load Cell USB...
INF1 – Analog – Single Sensor Weight Transmitter
The Interface INF1-Analog Single Sensor Weight Transmitter and Indicator with six-digit red LED display (8 mm height). Space saving compact...
INF1 – Ethernet IP – Single Sensor Weight Transmitter
The Interface INF1-Ethernet IP Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...
INF1 – Ethernet TCP IP – Single Sensor Weight Transmitter
The Interface INF1-Ethernet TCP IP Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...
INF1 – Modbus TCP – Single Sensor Weight Transmitter
The Interface INF1-Modbus TCP Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...
INF1 – RS485 – Single Sensor Weight Transmitter
The Interface INF1-RS485 Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...
INF4 – Analog – Multi-Channel Sensor Weight Transmitter
The Interface INF4-Analog Two, Three, and Four Sensor Weight Transmitter and Indicator with six-digit red LED display (8 mm...
INF4 – Ethernet IP – Multi-Channel Sensor Weight Transmitter
The Interface INF4-Ethernet IP Two, Three, and Four Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...
INF4 – Ethernet TCP IP – Multi-Channel Sensor Weight Transmitter
The Interface INF4-Ethernet TCP IP Two, Three, and Four Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...
INF4 – Modbus TCP – Multi-Channel Sensor Weight Transmitter
The Interface INF4-Modbus TCP Two, Three, and Four Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...
INF4 – RS485- Multi-Channel Sensor Weight Transmitter
The Interface INF4-RS485 Two, Three, and Four Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...
ioPro Distributed IO
The ioProTM family provides a comprehensive set of DIN high density rail mount IO modules for any Modbus-RTU application. Based on the successful ioPak family, but with new features and improved...
ISG Isolated Signal Conditioner
Model ISG Isolated DIN Rail Mount Signal Conditioner features a galvanically isolated power supply for use in high noise applications. This product has options for ±5VDC, ±10VDC and 4-20mA Outputs. Model ISG also has a 1 Hz to 1 kHz adjustable...
LCT-1 Load Cell Test Instrument
Model LCT-1 Ultimate is a hand-held device that is specifically designed to fully troubleshoot strain-gage based load cells. It provides several tests that indicate bridge resistance and integrity, overload, and insulation resistance – which can...
LDM-1000 Signal Conditioner
Measurement Specialties introduces the new LDM-1000 LVDT conditioning module, for Industrial applications requiring the DIN standard rail mount, form factor. The Measurement Specialties LDM LVDT / RVDT conditioner provides everything you will need...
LiM-4-20 Transmitter Module
The LiM 4-20 is low cost LVDT transmitter module designed to provide good performance at a cost suitable for OEM applications. Connection to the LiM 4-20 may be done utilizing the screw terminal barrier strip or optional card edge connector. Dip...
LVM-110 Voltage Module
The popular LVM-110, low cost LVDT / RVDT signal conditioner has been re-engineered to improve performance and versatility. The new LVM has increased LVDT drive current capability, to expand compatibility to LVDTs with lower input impedances. The...
MC2A and MC3 Signal Converters
The MC2 and MC3A signal converters (measuring amplifiers) are efficient options among measuring...
MGAII/ME Measuring System
The MGAII/ME measuring system provides different ME plug-in cards that allow the acquisition of various process-related measurement...
MP85A EASYswitch Process Controller
The intelligent process controller MP85A-S EasySwitch measures function and operation feeling (haptics) of switches as well as closing elements - and allows a 100 percent process and quality...
MP85A FASTpress Industrial Amplifier
The MP85A FASTpress process monitoring system measures the signals of processes precisely and quickly at up to 300 fitting cycles per minute. It allows for 100% transparency in your fitting...
PME Industrial Amplifiers
The intelligent PME measurement system is ideal for use in decentralized measurement applications within the industry, such as production processes with large machinery as well as for functional and power test...
PMX Modular Amplifier System
PMX is the precision multi channel data acquisition system that is particularly suitable for measuring and monitoring tasks in test benches, machines and plants used for...
RM4220 Amplifier
Amplifier for strain gage transducers with 4 mA to 20 mA output...
SCM100 LVDT Signal Conditioner
The SCM100 LVDT signal conditioning module has been designed specifically to operate with the AF111 and AF145 range of LVDTs, and to make using an LVDT as simple as using a linear potentiometer. This module incorporates a high performance circuit...
Scout55 Mobile Amplifier in Desktop Housing
The SCOUT55 mobile carrier-frequency amplifier is optimally suited to be used for the purpose of on-site servicing, mainly due to its robust transport housing and easy-to-read...
SD01A Zener Barrier
Our SD01A Zener barrier set is the ideal accessory for use with strain-gauge transducers connected to carrier-frequency and DC amplifiers that are balanced to...
SGA Signal Conditioner
Model SGA is a versatile signal conditioner featuring user selectable outputs of ±10V, ±5V, 0-10V, 0-5V, 0-20mA and 4-20ma. This product is DC or AC powered with switch selectable filters from 1 to 5kHz and is packaged in a sealed ABS enclosure....
SI-USB4 4-Channel USB Interface Module
The interface module SI-USB4 is connected between sensor and PC. In this way, analog sensor signals will be digitized with up to 16 bit resolution. By the measuring rate of 5000 measurements/s per measuring channel, high-dynamic measurements can be...
SSC Signal Conditioning Module
The new Penny+Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 -...
TE 142 In-Line Amplifier
The Model 142 is a remote in-line strain gage amplifier designed to be used with ¼ bridge strain gage instruments. The amplifier features five user selectable gain settings with a gain accuracy of ±0.5% and offers a wide bandwidth to 100kHz. The...
UCM Universal Signal Conditioner
The new Penny+Giles model UCM is a low voltage dc powered Universal Conditioning Module designed to operate with a wide range of LVDTs, RVDTs and other analogue inductive transducer...
VSC Vehicle Signal Conditioner
Model VSC is powered by 9-36V supply and provides ±5V output, high accuracy precision in a small IP67 enclosure. This product features 0.005...