Durham Instruments offers an incredibly wide array of tilt sensors and inclinometers! Single and multi-axis sensors including various technologies such as MEMS, servo-loop, capacitive, current-field, and optically based systems – each offering advantages specific to your application needs. We have the tilt sensor and inclinometer solution to improve your unique application!
AAL Dual Axis Inclinometer
The AAL-Series conductive inclination sensor offers a full calibrated inclination sensor module on a PCB. The sensor provides voltage output depending on the inclination angle and related to the specific axis, as well as a voltage based temperature...
AccuStar EA Electronic Clinometer
AccuStar®-EA takes low cost tilt sensing to the next level by combining 100% solid state technology with digital calibration and proprietary filtering techniques. The result is an extremely accurate tilt sensor with improved linearity, expanded...
AccuStar IP-66 Clinometer
The new AccuStar® IP-66 is designed for rugged industrial and outdoor applications. The die-cast, powder coated aluminum housing is suitable for the most hostile environments. Multiple input / output configurations provide for ease of...
AccuStar IP-66 Series
The AccuStar® IP-66 is a 4 to 20mA loop powered clinometer specifically designed for industrial and outdoor applications. Rated to IP-66, the rugged die-cast, powder coated aluminum housing provides protection in the most hostile...
AMH Series – High Precision MEMS Inclinometer
The Jewell Instruments model AMH is a high precision MEMS inclinometer. Standard units are available with 0-5V, 0.5-4.5V, or 4-20mA output options. All AMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output...
AMI Series – MEMS Inclinometer – Temp Corrected
The model AMI is a high precision MEMS inclinometer with built-in thermal compensation. Standard units come with 0-5V, 0.5-4.5V or 4-20mA output options. All AMI series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and...
AML Series – MEMS Inclinometer
The Jewell Instruments model AML is a low cost analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up to 1m. Custom...
AMS Series – Mid-Level MEMS Inclinometer
The Jewell Instruments model AMS is a mid-level performance analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up...
AngleStar Electronic Protractor System
The Anglestar® Protractor System (APS) is a ready to use, stand alone system for angle measurements. The system incorporates a special AccuStar I ratiometric electronic clinometer, a digital display, and a standard four foot cable. This system will...
AngleStar Protractor System
The AngleStar® Protractor System (APS) is a ready to use, stand alone system for angle measurements. The system incorporates an AngleStar Electronic Clinometer, a digital LCD display, and a four foot interconnecting cable (cable lengths up to 200...
D-series Dual Axis Inclinometer
D-Series Inclinometer features Measurement Specialties’ new generation of proprietary tilt sensing technology. Insensitive to humidity and stray capacitance, this differential conductive sensor provides excellent zero repeatability and hysteresis...
DMH Series – High-Performance Digital MEMS Inclinometer
The Jewell Instruments model DMH is a high precision MEMS inclinometer. Units are available with RS232, RS422, RS485 and UART TTL options. All DMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are...
DOG1 MEMS-Series Inclinometer
he single axis inclinometer is mainly developed for vehicle and tool position monitoring. A fast response time and good accuracy makes this device the ideal choice for mobile levelling applications. It features digital signal processing including...
DOG1 MEMS-Series USB Inclinometer
The Single Axis Inclinometer is well suited for test and measurement purposes as well as for vehicle and off road applications. A fast response time, good accuracy and high resolution are its key features. It uses a digital signal processing...
DOG2 MEMS-Series Dual Axis Inclinometer
The Dual Axis Inclinometer is mainly developed with focus on platform leveling, dynamic engine management, tip-over protection and tilt alarm. A fast response time and good accuracy makes this device the ideal choice for mobile leveling...
DOG2 MEMS-Series USB Dual Axis Inclinometer
The dual axis MEMS inclinometer has a measurement range of +/-90° inclination in both x-and y-axis. The rugged transducer design capable of functioning during and after severe shock loads and vibrations. This unit with USB interface is absolute...
DPG Dual Axis Inclinometer
The DPG Series dual axis conductive inclinometer in aluminium housing offers the user modern microprocessor technology, with an integrated active linearization and temperature compensation. This inclinometer is full calibrated, easy to mount and...
DPL – DPN Dual Axis Inclinometer
The DPL/DPN-Series is modern SMD technology based small board-level dual axis inclinometer applying conductive technology. A high-speed microcontroller implements linearization and temperature compensation routines, thus providing excellent accuracy...
DQG2 Dual Axis Inclinometer
The NS-25/DQG2-XUA is a small inclinometer based on dual axis tilt sensor, which works based on the conductivity principle. This microprocessor controls the inclinometer with a linearized and temperature compensated angle output signal. The unit has...
DXI-100 & DXI-200 Series Inclinometer
The Jewell DXI-100/200 Series single or dual digital inclinometer takes Jewell’s highly accurate analog closed loop sensor technology to the next level with RS232 and RS485...
E-Series Inclinometer
The E-Series is a fully signal conditioned single axis inclinometer ready for installation. Consisting of a tilt sensor, and hybrid electronics sealed within a ceramic housing, the E-Series provides a smooth VDC output over the ±5 resp. ±15 deg...
E2 Dual Axis Inclinometer
The E2-Series is a biaxial inclination sensor as a PCB Module for OEM use with measurement range +/- 5°, +/- 10°, +/- 15° and +/- 45°. It consists of two basic inclination sensor cells based on a conductance measurement principle and their...
ECC – 2D – eCompass Series
The ECC-2D Series is a low-cost 2D digital compass in a small package with low power consumption and high reliability designed for commercial and industrial...
ECG – eCompass Series
If your compass application involves vibration, acceleration, uneven terrain, or rough seas, the ECG Series, a gyro-stabilized electronic compass, is an uncompromising solution that will outperform rival units that cost...
ECL – eCompass Series
The ECL low-power digital compass is designed specifically for commercial, industrial, and military users. The ECL series will be of particular interest to ROV and AUV manufacturers who are concerned with power usage and accurate heading in all...
ECS – eCompass Series
The ECS digital compass represents the state-of-the-art in magnetic compassing. It combines a precision 3-axis solid-state magnetometer and a rugged 2-axis electrolytic tilt sensor to provide accurate heading and tilt measurements over a wide range...
ECV – eCompass Series
The ECV eCompass Series is a 3D electronic compass providing stable azimuth, pitch, and roll measurements in dynamic conditions. As an enhanced version of our ECG Series, the ECV includes a full suite of precision, 3-axis, MEMS sensors, and an...
eDXI-100 & eDXI-200 Inclinometer
The eDXI-100/200 inclinometer series is a precision single or dual axis tilt sensor that includes Ethernet...
G-Series Inclinometer Switch
The G-Series consist of a single axis conductive tilt sensor on a modern technology in environmentally protected and robust aluminum housing. The fast microcontroller works with a linearization and temperature compensation routines. This fully...
IT9101 Inclinometer • Voltage Divider
The model IT9101 is a rugged and simple device which provides a voltage divider feedback signal for incline position up to 240 degrees. The heart of the IT9101 is a magnetically-damped pendulum coupled to a conductive plastic precision...
IT9420 Inclinometer • 4..20 mA
The model IT9420 is a rugged yet simple device which provides a 4 to 20 mA current feedback signal for incline position. The heart of the IT9420 is a magnetically-damped pendulum coupled to a conductive plastic precision potentiometer. A highly...
JDI Series – Digital MEMS Inclinometer
The JDI-100/200 series is a digitally temperature compensated inclinometer available in single and dual axis...
JMI-D Series MEMS Inclinometer
The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. ±5V output...
JMI-L Series MEMS Inclinometer
The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. 4-20mA output...
JMI-S Series MEMS Inclinometer
The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. 0-5V...
LCF-100 Inclinometer
The Jewell LCF-100 Series Suspension Servo Fluid Damped Inclinometer is a ±1º to ±90º device designed for applications where high levels of shock and vibration are...
LCF-196 Inclinometer
The JEWELL LCF-196 Series Inclinometer meets the needs of high accuracy applications where high levels of shock and vibration are present. The LCF employs a fluid damped torsion flexure suspension that attenuates input energy to provide...
LCF-2000 Inclinometer
The Jewell LCF 2000 Series dual axis inclinometer is a rugged, high accuracy version of the LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and...
LCF-2330 Inclinometer
The Jewell LCF-2330 Series Inclinometer is a dual axis version of the rugged, high accuracy LCF Series. The design of the LCF-2330 was optimized to provide the high accuracy and superior repeatability of Jewell’s rugged, fluid damped, flexure...
LCF-300 Single-Axis Analog Inclinometer
The Jewell LCF-300 Series flexure suspension servo fluid damped inclinometer is a ±1° to ±90° device designed for applications where high levels of shock and vibration are...
LCF-3000 Inclinometer
The Jewell LCF 3000 Series tri-axis inclinometer is a rugged, high accuracy version of the LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and...
LCI Inclinometer
The JEWELL LCI Series meets the needs of high accuracy inclinometer applications with low shock and vibration such as those found in laboratories. The LCI employs a torsion flexure suspension that offers superior repeatability and low hysteresis at...
LSO Inclinometer
The Jewell LSO Series fluid damped, flexure suspension, servo inclinometer is a precision internal grade sensing instruments and it is Jewell’s most robust solution designed to meet the needs of a variety of commercial, industrial, and aerospace...
LSOX
The LSOX Series Inclinometer is a rugged, high performance, single-axis tilt sensor designed for peak performance in extreme conditions. The fluid damped mechanism delivers superior noise rejection in high shock and vibration environments as well as...
LSRP Inclinometer
The JEWELL LSR Series Inclinometer meets the needs of applications with space constraints. The compact, cylindrical shape and the "stacking" feature of the LSR facilitate the use of several inclinometers when multi-axis measurement is required. The...
Model 59577 Mid-Range Ceramic Sensor
The Model 84053 Ceramic Sensor Assembly is available without the mounting bracket as our uniaxial Model 59577 Ceramic Sensor. Performance is the...
Model A711-2, A716-2 Floor-mount & Wall-mount Tiltmeter
The model A711-2 (floor-mount), and A716-2 (wallmount) bolt or clamp to any surface, and are well suited for areas with heavy traffic or vibration. Electronic performance is identical to the model A701-2. Units include two switchable gains and two...
Model A711-2A/B/C(4X) IP65 Weatherproof Floor-mount Tiltmeter
The model A711-2(4X) Weatherproof Floor-mount Tiltmeter offers the same performance as the model A701-2(4X), but in a floor-mount package. Units are rated IP65 waterproof for use in wet, humid, and corrosive environments. The A711-2(4X) bolts or...
Model C901, C902 Tulip 4-20mA
The model C901 and C902 Tulip Uniaxial Clinometers deliver the same performance as our model A900-series, but with 4-20mA output. Units are available in horizontal (C901) or vertical (C902) mounting packages. The Tulip conveniently operates as a...
Models 59560 (Undamped) & 59562 (Damped) Biaxial Sensors, 5-Pin
The dual-axis Model 900 is an inexpensive, gravity-referenced clinometer with analog voltage output and compact dimensions. Sold without a housing, its small size and performance make it an excellent choice for many OEM, test and measurement...
MTS-20H Standard Probe With Hanger
Electro-Sensors MTS-20H standard probe with hanger is commonly used with tilt switch control unit SCU-200 to create a tilt switch system widely used in the process industry to sense the presence or absence of any bulk material. Typical applications...
MTS-30H Heavy-Duty Probe With Hanger
Electro-Sensors MTS-30H heavy-duty probe with hanger is commonly used with tilt switch control unit SCU-200 to create a tilt switch system widely used in the process industry to sense the presence or absence of any bulk material. Typical...
MTSS-20H Standard Stainless Steel Probe With Hanger
Electro-Sensors MTSS-20H standard probe with hanger is commonly used with tilt switch control unit SCU-200 to create a tilt switch system widely used in the process industry to sense the presence or absence of any bulk material. Typical applications...
MTSS-30H Heavy-Duty Stainless Steel Probe With Hanger
Electro-Sensors Tilt Switch System consists of a Control Unit and a Sensing Probe. It is widely used in the process industry to sense the presence or absence of any bulk material. Typical applications include: high or low bin level alarms, detection...
NS-15CAN Dual Axis Inclinometer
The CAN-Series of conductive inclinometers offers modern SMD- technology in environmentally protected and robust aluminum housing. The inclinometer achieves high accuracy over a wide temperature range. The fast microcontroller works with...
P-Series Inclinometer
The P-Series of conductive inclinometers offers modern technology in an environmentally protected and robust aluminium housing in IP class 65. The inclinometer achieves high accuracy over a wide temperature range. All P-type inclinometers are...
SCU-200 Tilt Switch Control Unit
Electro-Sensors Tilt Switch System consists of a Control Unit and a Sensing Probe. It is widely used in the process industry to sense the presence or absence of any bulk material. Typical applications include: high or low bin level alarms, detection...
V-Series Inclinometer
The V-Series of conductive single or dual axis inclinometers offers a modern electronic in an environmentally protected and robust aluminium anodized housing. This fully calibrated inclinometer is available with analogue voltage output signals or...