product

Phase-matched pair of ½-inch microphones, designed for being used with Brüel & Kjær’s range of sound intensity...

The Type HP-10 high pressure control valve is available in Globe or Angle configurations. It is well suited for the control of high pressure liquids and...

The steel industry has many examples of environments with extreme requirements in terms of temperature, mechanical forces, vibrations and shocks. For such types of applications, we have designed the 1000 series. An encoder series with exceptional...

Model 1000 series is a fatigue-rated load cell with 300% safe overload, extremely low moment sensitivity of 0.1%/in and a higher fatigue life. With many variants and configurations our fatigue-rated load cells provide up to 100 million fully...

Model 1000 is a fatigue rated load cell with 300% overload protection, extremely low moment sensitivity of 0.1%/in and a higher fatigue life than competitive stainless steel load cells. If you need to measure 1lb (4.45N) or 1 million pounds of force...

101 signal conditioner -...

The Model 1100 turbine flow meter is the ideal meter for liquid flow measurement both on and off the oilfield. This meter maintains measurement accuracy and mechanical integrity in the corrosive and abrasive fluids commonly found in oil field water...

The 1100 is selected from the best load cells and has very low nonlinearity, hysteresis, eccentric load sensitivity, and temperature sensitivity. The gauge sensors in every load cell are individually inspected and tested, and certified to meet our...

1101 stainless steel Hall-effect sensors provide digital pulse output signals, and are designed for use with magnetic targets such as 60 Pole Pair Magnet Wheels, Pulser Wraps, or Pulser...

The 1100 is selected from the best load cells and has very low nonlinearity, hysteresis, eccentric load sensitivity, and temperature sensitivity. The gauge sensors in every load cell are individually inspected and tested, and certified to meet our...

Electro-Sensors 1102 magneto resistive sensors are used with magnetic targets such as 60 pole pair magnet wheels, pulser wraps, or pulser discs to provide digital pulse output...

The Measurement Specialties’ 11206AC rugged uniaxial angular rate gyro is capable of accurately measuring angular rate under varied environmental conditions. A tough, compact housing holds potted electronics and a shielded 22 AWG cable. Its...

The Measurement Specialties’ 11207AC rugged uniaxial angular rate gyro is capable of accurately measuring angular rate under harsh conditions. A tough, compact housing holds potted electronics and a shielded 22 AWG cable. Its cubical form allows...

Internally amplified version of the 1200 and 1201 series standard precision low profile load...

The 1200 has higher output than most competitive load cells and is designed for general purpose applications requiring a load cell compensated for eccentric loads. If you need to measure 1lb or 1million pounds of force, Interface Inc. load cells can...

The 1200 Low Profile is Interface's most popular load cell and is designed for static applications. The 1200 has higher output than most competitive load cells and is designed for general purpose applications requiring a load cell compensated for...

The Model 1200 series are a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual-in-line configuration. Integral temperature compensation is provided over a wide temperature range using laser-trimmed resistors. An...

The 1201 LowProfile is Interface’s most popular load cell designed for static applications. The 1201 has higher output than most competitive load cells and is designed for compression-only applications requiring a load cell compensated for...

The Model 1201 accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 50 g to 1000g and frequency...

The Model 1201F accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 50 g to 1000g and frequency...

The Model 1203 Accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 50 g to 1000 g and frequency...

The Model 1207F accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 50 g to 1000g and frequency...

The Model 121 is a state-of-the-art, 3-Channel DC Differential Amplifier designed to be used with bridge type or differential output accelerometers, pressure transducers, and load cells. The amplifier offers an exceptionally low input noise floor of...

The Model 1210F accelerometer is a small, compact uniaxial MEMS accelerometer designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 2g to 200g and...

Model 1216 Axial-Torsion load cell measure both force and torsion in the same cell – with either channel capable of being used independently. Available in capacities from 250 lbf. to 2K...

1200 Flange Load Cell-This is similar to 1200 but instead of having a center thread it has multiple smaller threads making installation easier for certain types of cylinders. The gauge sensors in every load cell are individually inspected and...

The Model 130 series are remote in-line charge converters designed to be used with piezoelectric accelerometers. The low noise charge converters feature two fixed gain options that convert the high impedance charge output from the accelerometer to a...

The Measurement-Specialties 13200C (uniaxial) and 23200C (biaxial) analog accelerometers are capable of accurately measuring ±10 g, ±15 g, ±20 g, ±25 g, ±30 g, ±35 g, ±40 g, ±50 g, or ±70 g accelerations on one or two axes. A tough, compact...

The Measurement Specialties 13201A (uniaxial) and 23201A (biaxial) analog accelerometers offer precision measurements over the entire the -40ºC to +85ºC temperature range with superior bias stability and approximately 100 µg measurement...

...

...

The Measurement Specialties 13208A (uniaxial) and 33208A (biaxial) analog accelerometers offer a frequency response from 0 to 10 kHz while accurately measuring ±250 g or ±500 g accelerations on one or two axes. Their tough, compact housing holds...

Model 1331 Compression Only Low Profile Load Cell has a compact design with performance of +/-0.07% or better. This product has a high output of 4mV/V and is eccentric load compensated to ensure the highest accuracy during measurements. Model 1331...

The extended bonnet globe control valve is available in a 14" length for 1/4" through 1" line sizes. It is specifically designed for control of extremely cold or hot fluids and gases. In cryogenic applications, the bonnet length serves to extend the...

The Model 140 is a remote in-line DC amplifier designed to be used with bridge-type mV output transducers. The amplifier features five user selectable gain settings with a gain accuracy of ±0.5% and offers a wide bandwidth to 100kHz. The model 140...

140 signal conditioner -...

The Model 142 is a remote in-line strain gage amplifier designed to be used with ¼ bridge strain gage instruments. The amplifier features five user selectable gain settings with a gain accuracy of ±0.5% and offers a wide bandwidth to 100kHz. The...

The Model 142A is a remote in-line strain gage amplifier designed to be used with ¼ bridge strain gage instruments. The amplifier features five user selectable gain settings with a gain accuracy of ±0.5% and offers a wide bandwidth to 100kHz. The...

The Type HP-15 is a high-pressure control valve using a 17-4ph stainless steel body along with a solid Stellite® innervalve...

The 1500 is a fatigued rated Low profile load cell is designed for low capacity applications where low sensitivity to eccentric load is...

The Hammer Union Pressure Transmitter is an designed for the rugged environments of land based and offshore drilling installations including Mud Logging and Measurement while...

Model 1516 is a LowProfile™ load cell designed for applications where axial and torsion loads need to be measured simultaneously. Available in capacity 100 lbf./50...

These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small,...

These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small,...

These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small,...

These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small,...

These Measurement Specialties digital accel-erometers are complete, easy-to-use, user-configurable sensors containing one to three accelerometers, a tempera¬ture sensor, signal processor, RS-485 interface and three analog outputs in a small,...

The 154N uncompensated is a 19mm small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 154N uncompensated is designed for o-ring mounting and OEM applications requiring compatibility...

The 1600 Gold Standard load cell is designed for calibrating other load cells where the best possible load cell is required. It has a 4% lower load limit per ASTM E74 and is a step above the 1100. The 1600 provides both tension and compression in...

The 1601 Gold Standard load cell is designed for calibrating other load cells where the best possible load cell is required. It has a 4% lower load limit per ASTM E74 and is a step above the 1100. The 1601 provides...

The 1606 Gold Standard load cell is designed for calibrating other load cells where the best possible load cell is required. It has a 4% lower load limit per ASTM E74 and is a step above the 1100. The 1606 is especially made for low capacity...

The Model 161 series is a 4-channel signal conditioning amplifier designed to be used with piezoelectric accelerometers (IEPE or Charge) and most other piezoelectric based transducers. The Model 161 series incorporates front-panel controlled gain...

161 signal conditioner -...

The Model 1620 is a fully piezoresistive silicon pressure sensor for use in invasive blood pressure monitoring. The sensor is designed to be used with automated assembly equipment and can be dropped directly into a customer's disposable blood...

The Model 1630 is a fully piezoresistive silicon pressure sensor for use in intrauterine pressure monitoring. The sensor is designed to be used with automated assembly equipment and can be dropped directly into a customer's disposable intrauterine...

The 1700 Flange Load Cell has multiple smaller threads making installation easier for certain types of cylinders. The gauge sensors in every load cell are individually inspected and tested, and certified to meet our rigid...

Designed to make acoustical measurements at temperatures up to 125°C (257°F) with a constant-current line drive (CCLD) input...

Model 1800 Platinum Standard® load cell is the ultimate in calibration grade load cells which is capable of a 2% lower limit per ASTM E74 and features an integral...

The 60 Pole Pair Magnet Wheel is a ferro-magnetic nylon wheel with 120 alternating magnetic poles infused within the material. It is 3-3/4 inches in diameter, with the magnetic surface on the outside circumference of the wheel. The magnets are...

The 60 Pole Pair Magnet Wheel is a ferro-magnetic nylon wheel with 120 alternating magnetic poles infused within the material. It is 3-3/4 inches in diameter, with the magnetic surface on the outside circumference of the wheel. The magnets are...

200-202 Flowmeters-Controllers...

Model 2000 High Precision Canister Load Cell features low hysteresis of +/-0.03% or less while offering rugged construction for use in harsh environments. This product has a ring-type design that is preferred for use in heavy duty force testing....

Some motors require a speed feedback sensor mounted on the main shaft between other parts in the machinery. Here the shaft dimensions may be large – sometimes around a meter – which means that a standard optical encoder is not suitable....

...

New...

Torque measurement...

Customized...

Applied HBM...

HBM...

Experimental stress...

HBM...

HBM...

The Model 201 is a low noise accelerometer offering both static and dynamic response. The accelerometer is packaged in an anodized aluminum housing with an integral cable. It is offered in ranges from ±2g to ±50g. Featuring gas damped MEMS sensing...

201-203 Flowmeters-Controllers...

Issue 1/2010 of our HBMhotline.com customer magazine focuses on fascinating new products for measurement data...

The latest issue of HBMhotline highlights the revolution in food processing technology—the brand new aseptic load cell from HBM. For the first time ever, the advantages of precise and cost-effective weighing technology can be used in aseptic...

The latest issue of HBM's customer magazine HBMhotline, dedicated to the world of production monitoring, highlights the importance of quality - as the hard currency of global production. See how HBM products for production control help you to...

The Model 203 is a low noise triaxial accelerometer offering both static and dynamic response. The accelerometer is packaged in an anodized aluminum housing with an integral cable. It is offered in ranges from ±2g to ±50g. Featuring gas damped...

The 2101 consist of lower and higher capacity model 1200 type load cells which are stacked with overload protection built into the lower capacity load cell permitting high resolution to be obtained at both low and high levels of...

The 2160 is a column load cell typically used in higher force applications. Available in capacities from 300K lbf. to 1000K...

Model 2200 is a Calibration Grade Column Load Cell that is lightweight and portable for use in the field. This product is also excellent for performing calibrations in the lab as well. Capacities from 100K lbf to 200K lbf are...

To answer the need for a hammer union pressure transducer that could ship quickly and take the punishment, we designed one from the ground up. It's packed with useful features that make it the easiest to use and install. More importantly, it can...

20 dB GAIN, for Type 4179. Designed for very-low-level sound...

20 dB gain, for Type 4179. Designed for very-low-level sound measurements.  This is a modified version that can be used with PULSE using extension cable...

Model 2300 is a column design that has a flange mount for easy installation. Capacities from 142K lbf to 450K lbf are...

Heavy Duty Pulser Discs are constructed of nylon, PVC, aluminum, or stainless steel. Pulser Discs can be used with any Electro-Sensors Hall Effect or Magneto Resistive...

The 2400 is a stainless steel load cell designed for applications requiring a hermetic seal for use in general industrial applications. Capacities from 7.5K lbf to 300K lbf are...

The 2400 is a stainless steel load cell designed for applications requiring a hermetic seal for use in general industrial applications. Capacities from 100 lbf to 5K lbf are...

The 2404 is an amplified version of 2400 which gives mA output. It is still a stainless steel load cell designed for applications requiring a hermetic seal for use in general industrial applications. Capacities from 100 lbf to 5K lbf are...

Heavy Duty Pulser Discs are constructed of nylon, PVC, aluminum, or stainless steel. Pulser Discs can be used with any Electro-Sensors Hall Effect or Magneto Resistive...

Heavy Duty Pulser Discs are constructed of nylon, PVC, aluminum, or stainless steel. Pulser Discs can be used with any Electro-Sensors Hall Effect or Magneto Resistive...

Heavy Duty Pulser Discs are constructed of nylon, PVC, aluminum, or stainless steel. Pulser Discs can be used with any Electro-Sensors Hall Effect or Magneto Resistive...

The 25/E2-Series is a biaxial inclination sensor as a PCB Module for OEM use with measurement range +/-25°. It consists of dual basic inclination sensor cells based on a conductance measurement principle and their complete electronic biasing and...

Tapered, Including Cable AO-0428, BRÜEL & KJÆR Connector. Designed to operate over a wide range of temperature, humidity and other environmental...

Cylindrical, LEMO 1B Connector, No Cable. Designed to operate over a wide range of temperature, humidity and other environmental...

Tapered, Incl. Cable, 7-Pin LEMO Connector. Designed to operate over a wide range of temperature, humidity and other environmental...

Integral 2m Cable with 7-Pin LEMO Plug. Designed to operate over a wide range of temperature, humidity and other environmental...

Integral 2m Cable with 7-Pin LEMO Plug. Optimised for airbag measurements. Designed to operate over a wide range of temperature, humidity and other environmental...

For 1/2-Inch Prepolarized Microphones, Without Cable. Designed to be used in a wide range of environmental conditions and in narrow...