LVDT

Suitable for clamp mounting, the AF111 range have a threaded, unguided core assembly to simplify...

Mounting is by self-aligning rod end bearings, and the outer sliding sleeve protects the movable core whilst enhancing the rigidity of the transducer during...

The CTS 420 is a 2-wire current loop position transmitter system especially suited to valve position indication and other position indication in process industries. The system consists of an LVDT position sensor with matching electronics to provide...

The DC–EC AccuSens™ Series incorporates a unique monolithic chip combined with a computer-designed AC LVDT to achieve premium performance. The ratiometric design of the monolithic circuitry compensates for power supply deviations for...

The DC-SE series has been designed to meet today’s requirements for operation from a single-ended power supply. The output is also single-ended over the full range displacement of the LVDT making the unit compatible with unipolar inputs on...

The Ultimate-Precision Digital LBB gaging system consists of digital gaging probes daisy chained in a network using T-Connectors (available separately) with DE-9P and -9S connectors. Each Digital LBB gaging probe includes a highly repeatable analog...

The E Series of LVDTs is economical and satisfies numerous applications where LVDT performance and reliability are desired, but where budgets are limited. Linearity is 0.5% of full-range for all units except the E2000. The E series is particularly...

GC-485 DigiSense™ Gage Head is available in five bipolar measurement ranges, with standard strokes from ± .050 inches to ± 1.0 inch. The single ended 8.5 to 30.0 volt dc. input and two-wire, addressable RS-485 output, make the GC-485 ideally...

GCA Series gage head with stainless steel construction enables the performs in environments containing moisture, dirt and other contaminants. Electronic components are hermetically sealed for added protection against hostile conditions. These are...

The GCA-AE Series heavy-duty gage heads enable high performance in environments containing moisture, dirt, and fluid contaminants. These Gage heads are air-extend, spring-retract LVDTs (Linear Variable Differential Transformers) with precision...

GCD Series gage head with stainless steel construction enables the performs in environments containing moisture, dirt and other contaminants. Electronic components are hermetically sealed for added protection against hostile conditions. These are...

The GCD-AE Series heavy-duty DC operated gage heads enable high performance in environments containing moisture, dirt, and fluid contaminants. These Gage heads are air-extend, spring-retract LVDTs (Linear Variable Differential Transformers) with...

The GCD-SE Series is available in five uni-polar measurement ranges, with standard strokes from 0 to 0.1 inch to 0 to 2.0 inches. Operating on a single ended 8.5 to 28.0 volt dc. input, and minimal current draw, the GCD-SE is ideally suited to...

The GCT Series Gage Head Transmitter is available in four different ranges from 0 to .250-inch, to 0 to 2.0-inches. This rugged two wire loop powered gage head is designed for harsh environments with its hermetically sealed stainless steel, housing...

The HC485 DigiSense™ Displacement Sensor is available in seven bipolar measurement ranges, with standard strokes from ± .050 inches to ± 3.0 inches. Operating on a single ended 8.5 to 30.0 volt dc. input and a two-wire addressable RS-485 output,...

HCA-RA right angle series LVDTs are tungsten-inert gas (TIG) welded for hermetic sealing with an easy to install radial connector termination. A design improvement to the standard HCA series, the HCA-RA has a through bore design and a right angle...

The HCA Series LVDTs are tungsten-inert gas (TIG) welded to form a hermetic seal that is impervious to dirt, water, steam and corrosive liquids and vapors. They feature a glass-sealed, MS-type connector, but do not permit through bore operation. (A...

The HCD series LVDTs are impervious to dirt, water, steam spray and most corrosives. Tungsten inert gas (TIG) welding provides hermetic sealing that is free from oxidation-producing faults that may cause leakage. They have been qualified at...

The HCT Series LVDT transmitters are the perfect choice for high performance measurements in environments containing moisture, dirt, and fluid contaminants. Operating on a +10.5 to +28VDC loop voltage, the HCT delivers a smooth 4-20mA current loop...

The HR Series of LVDTs is highly reliability and is suitable for most general applications. The HR Series features a large core-to-bore clearance, high output voltage over a broad range of excitation frequencies, and a magnetic stainless steel case...

The HR-T Series LVDTs are a variant of the popular HR Series. The HR-T Series LVDTs provide the optimum performance required for a majority of high-temperature applications up to 392°F continuous. The large 1/16 inch bore-to-core radial clearance...

The Linear Ball Bearing (LBB) Series of dimensional gaging probes is engineered for highly precise and repeatable measurements in quality control and metrology applications. LBB within the gaging probe minimize radial play and friction for...

Because of quantum improvements in coil winding technology, Measurement Specialties is able to offer premium LVDT performance at standard LVDT pricing with our M-12 Series LVDT. The M-12 Series LVDT is wound on a ribless bobbin providing the smooth...

The MHR Series of LVDTs is ideal for applications where excessive core weight could influence the motion of sensitive mechanisms. The lightweight core also helps minimize stresses and preserves the structural integrity of the core actuation...

The MHR-T Series LVDTs are a variant of the legendary MHR Series. The MHR-T Series provide precision measurements in space restrictive applications at temperatures up to 392°F continuous. With a diameter of just 3/8 inch , and an extremely...

The MHR-V Series LVDTs are a variant of the legendary MHR Series. The MHR-V is specifically designed for submersion in inert gas, mineral oil, and other non-aggressive oils (consult factory for medium compatibility) under pressures up to 10,000 PSI...

The MP Series of LVDTs is suitable for heavy industrial use. Its coils are encapsulated in an anodized extruded aluminum housing, providing protection against electromagnetic and electrostatic interference. A heavy-duty terminal barrier strip...

Our PCA-116 family of gage heads was developed for less demanding applications where a balance between cost and performance is paramount. PCA-116 gage heads incorporate a standardized LVDT with repeatability better than 0.0001" (0.0025 mm) and...

The PCA-375 Series gage head is based on the MHR series of LVDTs. The modified MHR has an extended case and spring-loaded plunger. The design goals were simplicity and high reliability with low cost. This goal was met by implementing a plain bronze...

The PCA-375 PR-020 Series gage head is an ultra-compact device that provides accurate measurement in areas with limited space. Designed with a radial cable exit, the gage head easily fits within miniature fixtures and small inside diameters. AC...

The PTS 420 linear position transmitter consists of a one-piece linear position sensor and transmitter electronics. Configured for use in two-wire, current loops, the PTS 420 is compatible with most process controllers. Units are available in...

The XS-B Series was designed for micro applications. It is particularly well suited for multi-point measurement of small components. Core weight is virtually negligible. Manufacturing requires extremely sophisticated assembly techniques. Coils are...

The XS-C Series satisfies those applications involving measurement and control in pressure-sealed chambers, e.g., hydraulic actuators and pressure vessels where bulkhead mounting is permitted. It is a sealed, heavy-walled LVDT suitable for operating...

The XS-D Series is particularly well suited for measuring relatively large displacements, but where installation space is limited. The XS–D has a substantially greater displacement range than standard LVDTs but without the accompanying increase in...

The XS-ZTR Series LVDT is designed for measuring displacement at very high and cryogenic temperatures. The XS-ZTR operates continuously at 550°C and will survive 650°C for several hours. The XSZTR is also designed to perform within specification...