MEMS

Jewell Instruments AMA Series Accelerometers are an excellent choice for cost to performance trade off. The DMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.  Analog...

Designed for Low-frequency, motion and tilt measurements on flight testing, road load testing, transportation and modal...

Designed for Low-frequency, motion and tilt measurements on flight testing, road load testing, transportation and modal...

Designed for Low-frequency, motion and tilt measurements on flight testing, road load testing, transportation and modal...

Designed for Low-frequency, motion and tilt measurements on flight testing, road load testing, transportation and modal...

Designed for Low-frequency, motion and tilt measurements on flight testing, road load testing, transportation and modal...

Designed for Low-frequency, motion and tilt measurements on flight testing, road load testing, transportation and modal...

Jewell Instruments DMA Series Accelerometers are an excellent choice for cost to performance trade off. The DMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability. RS232 / RS485...

CENELEC and AREMA qualified JMA-165 series MEMS accelerometers are now a cost effective and viable alternative to the traditional forced balanced...

CENELEC and AREMA qualified JMA-165 series MEMS accelerometers are now a cost effective and viable alternative to the traditional forced balanced designs. Internal Heater...

±5V output version.  The JMA-100/200/300 series is available in single (JMA-100), dual (JMA-200) and triple (JMA-300) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS...

4-20mA output version. The JMA-100/200/300 series is available in single (JMA-100), dual (JMA-200) and triple (JMA-300) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS...

0-5V output version. The JMA-100/200/300 series contains MEMS technology and is available in single (JMA-100), dual (JMA-200) or tri-axis (JMA-300) configurations. Standard measuring ranges span from the precision of ±0.5 g to a broad ±10 g with a...

The Model 1201 accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 50 g to 1000g and frequency...

The Model 1201F accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 50 g to 1000g and frequency...

The TE Connectivity model 13201A and 23201A accelerometers are rugged analog accelerometers capable of accurately measuring vibration inputs along each axis. The model 13201A sensor is a single axis accelerometer while the model 23201A is a dual...

The Model 3801A is a mV output piezoresistive accelerometer in a rugged hermetic package. The accelerometer incorporates mechanical stops for over-range protection up to 10,000g. The Model 3801A is offered in ranges from ±50 to ±2000g and is gas...

The Model 4000A is an economical signal conditioned MEMS DC accelerometer packaged in an anodized Aluminum housing. The accelerometer is available in ranges from ±2 to...

The Model 4020 & 4030 are low noise, signal conditioned DC accelerometers packaged in a durable molded housing. The accelerometers are offered in ±2g & ±6g ranges with a nominal 0-200Hz bandwidth. The model 4020 is a dual axis...

The Model 40A Accelerometer is a small piezoresistive accelerometer designed to be compliant with the latest SAE J211/J2570 (AUG2009) specifications. This unit features built-in mechanical stops, anodized aluminum alloy housing and flexible cable...

The Model 40B Accelerometer is a small piezoresistive accelerometer designed to be compliant with the latest SAE J211/J2570 (AUG2009) specifications. This unit features built-in mechanical stops, anodized aluminum alloy housing and flexible cable...

The Model 40B Accelerometer is a small piezoresistive accelerometer designed to be compliant with the latest SAE J211/J2570 (AUG2009) specifications. This unit features built-in mechanical stops, anodized aluminum alloy housing and flexible cable...

The Model 4203 is a triaxial motorsport accelerometer designed for harsh installations. The rugged, gas damped accelerometer is ideally tailored for motorsport applications and road vehicle testing. The model 4203 features an 8-pole low-pass filter...

The Model 4332M3 is 4-20mA output MEMS triaxial accelerometer offering both static and dynamic response. The accelerometer is packaged in a corrosion resistant stainless steel housing and is offered in ±2g to ±20g range. The model 4332M3 features...

The Model 4602 is designed for both static and dynamic measurements in critical and demanding applications. It is available in ranges from ±2 to ±200g and offers outstanding thermal performance. It is compensated from -55°C to +125°C. The...

The Model 4604 is a rugged, low-profile MEMS DC accelerometer with exceptional performance over a full operating temperature range of -55°C to +125°C. The accelerometers are available in ranges from ±2 to ±200g with a wide bandwidth from DC to...

The Model 4610 is an ultra-stable MEMS DC accelerometer with exceptional performance over a full operating temperature range of -55°C to +125°C. The accelerometers are available in ranges from ±2 to ±200g with a wide bandwidth from DC to...

The Model 4630 is an ultra-stable MEMS DC triaxial accelerometer with exceptional performance over a full operating temperature range of -55°C to +125°C. The accelerometers are available in ranges from ±2 to ±200g with a wide bandwidth from DC...

The Model 4801A is an ultra-stable MEMS accelerometer packaged in a rugged, hermetically sealed stainless steel housing. The accelerometer is available in ranges from ±2 to ±200g with a wide bandwidth from DC to...

The Model 4810A is an ultra-stable MEMS accelerometer packaged in a rugged, low-profile stainless steel housing.  The accelerometer is available in ranges from ±2 to ±200g with a wide bandwidth from DC to 2000Hz. The model 4810A accelerometers...

The Model 4835A is an ultra-stable MEMS DC triaxial accelerometer packaged in a rugged, welded Titanium housing.  The model 4835A accelerometers incorporate gas damped silicon variable capacitance MEMS sensing elements with integral over-range...

The Model 52 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit features a full bridge output configuration with an operating temperature range from -40 to...

The TE Connectivity model 52F Accelerometer has recently been upgraded to incorporate the most advanced piezoresistive MEMS sensor on the market. The accelerometer features the next generation of the reliable TE Connectivity piezoresistive chip with...

The Model 52M30 accelerometer has an advanced piezoresistive MEMS sensing element which offers excellent dynamic range and stability. This unit features a full bridge output with an operating temperature range from -40 to +90°C and measurement...

The Model 53 and 53A Triaxial Crash Test Accelerometers are some of the most popular sensor to be used in crush zone and side impact testing when a triaxial solution is preferred.  The accelerometers feature the next generation of the reliable TE...

The model 58 accelerometer is available in ranges from ±50g to ±6000g and features a full-bridge configuration with a nominal 4000Ω impedance that offers quick warm-up time and minimal drift, unlike lower impedance designs on the...

The Model 606M1 is a MEMS triaxial seat pad accelerometer with both static and dynamic responses designed specially for characterizing whole body vibration in accordance with ISO 2631-1 and ISO 8041. The DC response of the silicon MEMS sensors is...

The TE Connectivity model 64B is an exceptional piezoresistive MEMS accelerometer designed for both crush zone and anthropomorphic dummy instrumentation. The accelerometer features a full bridge output configuration with ideal gas damping tailored...

The TE Connectivity model 64C crash test accelerometer is a remarkable MEMS piezoresistive sensor specifically designed for auto safety testing in both crush zone and anthropomorphic dummy applications. The model 64C ATD dummy test accelerometer is...

The TE Connectivity model 64X is the most advanced accelerometer ever released for anthropomorphic dummy instrumentation. The accelerometer features a full bridge output configuration with ideal gas damping tailored for outstanding shock...

The TE Connectivity model 68CM1 Triaxial Crash Test Accelerometer offers exceptional performance for ATD dummy instrumentation with best in class frequency response, linearity, transverse sensitivity and long-term drift. The model 68CM1...

The Model 805M1 is a miniature adhesive mount voltage output accelerometer built on a 3-pin TO-5 header. It is available in ±20g and ±200g dynamic ranges and offers a flat frequency response to 12kHz. The accelerometer features a hermetic...

The ACH-01 is an inexpensive, general purpose accelerometer with outstanding performance characteristics. The use of piezoelectric polymer film in the ACH-01 provides many cost/performance advantages that allow it to be used in a wide range of...