product

The QuantumX data acquisition system (DAQ) is the perfect tool for all of your test and measurement needs. For reliable data acquisition of different physical quantities and sensor technologies, QuantumX is the preferred choice. It has the unique...

Accessories for the QuantumX data acquisition...

Backplane for integrating max. 9 QuantumX modules. Additional modules can be connected by FireWire. Backplane for wall or control-cabinet...

The BNC-to-SubHD adapter can be used to connect IEPE/ICP sensors or ±10V signals with a BNC connector to QuantumX...

Internal data storage of all the signals of the connected QuantumX/SomatXR modules | Stand-alone recording in a robust data format, export to other...

The QuantumX CX27C gateway module is the key to many different measurement chain configurations - without compromise. It enables both time-synchronous metrological analysis of the test specimen and integration with test bench automation und...

Clip connectors for fast mounting of QuantumX on top of or next to each...

16 channels of Current-fed piezoelectric transducers (IEPE, ICP), Voltage and...

16-channel amplifier for Type K thermocouple...

16-channel amplifier for Type T thermocouple...

strain gauge full or half bridge, quarter bridge (120 or 350 ohm completion...

strain gauge full or half bridge, quarter bridge (350 or 1000 ohm completion...

2-channel module for precise measurement of SG-full-bridge transducers with accuracy of 25...

QuantumX 4-channel module for electrically isolated voltage measurement up to...

QuantumX 4-channel, highly dynamic universal amplifier | Measure sensor signals up to 200...

QuantumX 4-channel bridge module for precise measurement of strain-gauge-full-bridge-based transducers (dynamic,...

QuantumX 4-channel universal...

QuantumX 4-channel, highly-dynamic digital module for the acquisition of torque, rotational speed, angle, position, and displacement up to 100...

4-channel CAN module for the acquisition of CAN signals or integration of the QuantumX family into...

4-channel CAN FD module for the acquisition of CAN signals or integration of the QuantumX family into...

8-channel thermocouple amplifier for insulated and reliable thermocouple measurements in an electrical...

QuantumX 8-channel universal...

Module with 8 analog voltage outputs (± 10V) for real-time output of any sensor...

Module with 8 analog voltage outputs & 32 digital...

The new QuantumX MXFS BraggMETER is both an optical interrogator and an integration toolkit for the reliable QuantumX DAQ system. It offers 8 connectors for 16 channels each totaling impressive 128 channels per...

The adapter enables electric voltages up to 300V (CAT II) or up to 500V (non-CAT) to be reliably measured using a QuantumX universal...

SCM-SG120/350 - Quarter bridge adapter for measuring single strain...

The adapter can be used to connect thermocouples with thermo-Mini connectors. The SubHD connector comes with an integrated cold junction...

The plug-in cold junction can be used for measurements with thermocouples with the MX840 or MX440 universal...

The module guarantees an uninterruptible power supply (UPS), for ex., for buffering power drops of up to 80s in a broad temperature range...

The R-Flex™ coupling system is a versatile, easily installed coupling device that corrects for most types of angular sensor shaft misalignments. R-Flex™ provides excellent hysteresis-free repeatability. The unique six-beam R-Flex™ coupling...

The R120LC Series is a DC operated non-contact rotary transducer. The R120LC proprietary design incorporates a set of printed circuit coils and a conductive spoiler to achieve superior performance and low cost. The digital circuit is very resistant...

RVDTs incorporate a proprietary non-contact design that dramatically improves long term reliability when compared to other traditional rotary devices such as syncros, resolvers and potentiometers. This unique design eliminates assemblies that...

RVDTs incorporate a proprietary non-contact design that dramatically improves long term reliability when compared to other traditional rotary devices such as syncros, resolvers and potentiometers. This unique design eliminates assemblies that...

RVDTs incorporate a proprietary non-contact design that dramatically improves long term reliability when compared to other traditional rotary devices such as syncros, resolvers and potentiometers. This unique design eliminates assemblies that...

RVIT’s are DC operated non-contact rotary transducers. The RVIT proprietary design incorporates a set of printed circuit coils and a conductive spoiler to achieve superior performance and low cost. During operation, the conductive spoiler rotates...

A vibration controller feature used within a closed-loop test system to produce a random signal that simulates a broad range of real-world operating...

A vibration controller feature used within a closed-loop test system to drive shakers by generating a profile that combines broadband random excitation with multiple narrow-band...

Extra Protection Against Extraordinarily Dirty Environments. Reduces the cable-exit opening down to a single point to prevent excess debris from entering the spool cavity. RBS option uses two sets of cable brushes to help clean...

Product Brand: Penny &...

Product Brand: Penny &...

The RCT1000 Coriolis mass flow meter identifies flow rate by directly measuring mass flow and density of fluids over a wide range of process temperatures with a high degree of accuracy. For homogenous fluids consisting of two components like sugar...

RDS series strain gauges allow determining crack propagation in...

Model REC is a rod end load cell that is typically used with actuators. This product is available in capacities from 1K to 50K lbf (5 kN to 220...

A vibration controller feature used within a closed-loop test system to search for and track the resonant frequencies of any given payload. This is restricted to calculating the transfer function from one accelerometer position only; that is, to...

The MTS3000 or RESTAN (Residual Stress Analyzer) is an...

Due to its tiny size, the strain gauge rosette RF9 in miniature is especially suitable for circuit boards and very small...

The RNG Series meter is an insertion-style vortex shedding flow meter designed for accurate measurements over an extremely large flow range. The meters have no moving parts and are virtually maintenance-free. The RNG Series is suitable for most gas...

RSYN angular position sensors are non-contact transducers that incorporate proprietary rotor and coil designs. Their basic construction eliminates items such as slip rings, rotor windings, contact brushes or wipers that degrade over time and impair...

Electro-Sensors offers 3 types of rub block door...

Product Brand: Penny &...

RVITs are DC operated non-contact rotary transducers. The RVIT proprietary design incorporates a set of printed circuit coils and a conductive spoiler to achieve superior performance and low cost. During operation, the conductive spoiler rotates...

RVITs are DC operated non-contact rotary transducers. The RVIT proprietary design incorporates a set of printed circuit coils and a conductive spoiler to achieve superior performance and low cost. During operation, the conductive spoiler rotates...

The RVIT-Z series is the first in the series developed from Measurement Specialties' flat non-contact rotary displacement sensors. The unique design of the RVIT-Z incorporates the proprietary RVIT (Rotary Variable Inductive Transformer) technology...

The RVL series meter uses vortex-shedding technology has no moving parts, and any potential for fluid contamination is eliminated by the corrosion-resistant all-plastic construction. The meter includes a compact two-wire (4…20 mA) or three-wire...

The RWG and RWBG Series meters are wafer-style in-line flow meters designed for high accuracy measurements with extremely low pressure drop. The meters have no moving parts and are virtually maintenance-free after installation. The RWG series is...

RY strain gauges have 3 measuring grids arranged at an angle of 0°/45°/90° (types RY1, RY3, RY8, RY9, RY10), or 0°/60°/120° (types RY4, RY7). These strain gauges (SGs) are an appropriate choice for analyzing the biaxial stress state with...

The S2M S-type load cell is the most accurate of its kind and is ideally suited for smaller forces: The smallest measuring range is 10 N. The S2M also features an excellent price-to-performance...

S9M offers you an extremely precise, rugged and convenient S-shaped force transducer. Typical fields of application include test benches and torque measurements with a lever as well as production and monitoring...

The Electro-Sensors SA420 Signal Conditioner is a complete system which provides an analog signal directly proportional to the speed of a monitored shaft. The 0-10 Vdc and 4-20 mA outputs can be sent to a chart recorder, digital display, PLC, loop...

Model SCB1 is a high resolution signal conditioning board that has 20-bit resolution with 0.003% nonlinearity. This product is designed for use with Interface Gold Standard Calibration Systems and can be provided in a single or dual channel...

The SCM100 LVDT signal conditioning module has been designed specifically to operate with the AF111 and AF145 range of LVDTs, and to make using an LVDT as simple as using a linear potentiometer. This module incorporates a high performance circuit...

The SCOUT55 mobile carrier-frequency amplifier is optimally suited to be used for the purpose of on-site servicing, mainly due to its robust transport housing and easy-to-read...

SCP1000 Presettable Machine Speed Switches are complete systems providing one individually adjustable relay set point, while monitoring a single rotating...

SCP2000 Presettable Machine Speed Switches are complete systems providing two individually adjustable relay set points, while monitoring a single rotating...

Electro-Sensors Tilt Switch System consists of a Control Unit and a Sensing Probe. It is widely used in the process industry to sense the presence or absence of any bulk material. Typical applications include: high or low bin level alarms, detection...

SCV-85 Research Control Valves are compact control valves designed to meet the manufacturing standards established by the 3A Symbol Council. Valves of the SCV-85 type are well suited to automated control systems found in biotechnology,...

SCV-89 Research Control® Valves are compact control valves designed to meet the manufacturing standards established by the 3A Symbol Council. The standard investment cast body provides a unit that is lightweight and economical. Valves of the SCV-89...

The SCV-95 Sanitary Research Control® Valve is a compact 2 inch control valve. The valve uses Tri-Clover® angle bodies and provides larger line sizes and larger flow coefficients than are available from our other sanitary products. Valves of the...

Our SD01A Zener barrier set is the ideal accessory for use with strain-gauge transducers connected to carrier-frequency and DC amplifiers that are balanced to...

The 'S' in SDT Series stands for 'Shielded Sensor'. SDT1 piezo film sensors consist of a rectangular element of piezo film together with a molded plastic housing and 18" of coaxial cable. The film element, screen printed with silver ink, is folded...

The Celesco SE1 is the digital encoder version of our compact String Pot series. The SE1 is an economical and durable device that utilizes a flexible cable, a spring-loaded spool and an incremental optical encoder to detect and measure linear...

Series 18 sensors are available in a range of output sensing and signaling options to meet even the most demanding application requirements. The sensors function by detecting passing magnets from a shaft-mounted pulser disc or wrap and output a...

The Series 9000 control valve is an ANSI Class 300 globe style valve with bolted bonnet and post guided innervalve. The body, bonnet and innervalve are standard in 316SST or optional Alloy C. The standard body, configured in the Flangeless/NPT...

The Type 1711 Research Control Valve is designed for modulating flow or pressure control in industrial and research applications. The unit features an oversized stem and extra heavy guided innervalve for added strength and...

The 1711HD features a high pressure bar stock body with a union bonnet, with an oversized stem and extra heavy duty guided innervalve for added strength and longevity. The stem packing is designed for tight sealing, long life and easy maintenance....

The SG1 provides absolute linear position up to a 10-ft. stroke range. Constructed with a rugged polycarbonate body, this model is available in an 80-inch or 120-inch stroke range and offers optional IP67 protection for wet or outdoor installations...

Provides independent, accurate feedback of slide gate position to a controller (PLC) or optional remote slide gate...

Electro-Sensors’ SG1000B is a complete position monitoring system designed to sense the position of both linear and rack-and-pinion driven slide...

Electro-Sensors' SG1000C is a complete position monitoring system used to accurately measure the position of a process that has a repetitive single-turn rotary...

Electro-Sensors SG1000D Valve Position Monitor is a complete position monitoring system housed in a compact and rugged explosionproof NEMA 4X enclosure. It is an encoder-based position sensor providing a 4-20 mA output and is used to measure a...

Electro-Sensors SG1000E Sub-Turn Shaft Position Monitor is a complete position monitoring system housed in a compact and rugged explosionproof NEMA 4X housing. It is an encoder-based position sensor providing a 4-20 mA output and is used to measure...

SG250 silicone rubber is a transparent, one-component covering material that protects strain-gauge installations. The product is solvent-free and cures in contact with air at room...

Model SGA is a versatile signal conditioner featuring user selectable outputs of ±10V, ±5V, 0-10V, 0-5V, 0-20mA and 4-20ma. This product is DC or AC powered with switch selectable filters from 1 to 5kHz and is packaged in a sealed ABS enclosure....

Expands on the short-range SP and SM series and extends measurement out even further with 80-inch and 120-inch options. Measurement Range Options: 0-80 in. and 0-120 in. 4..20mA • 0..10 Vdc Output...

Expands on the short-range SP and SM series and extends measurement out even further with 80-inch and 120-inch options. Measurement Range Options: 0-80 in. and 0-120 in. CANopen Output...

Expands on the short-range SP and SM series and extends measurement out even further with 80-inch and 120-inch options. Measurement Range Options: 0-80 in. and 0-120 in. SAE J1939 CANBus Output...

A vibration control feature used to synthesize a specified shock response spectrum (SRS) to measure a payload’s resistance to shock...

...

Types and basic patterns of standard strain...

Basic...

The interface module SI-USB4 is connected between sensor and PC. In this way, analog sensor signals will be digitized with up to 16 bit resolution. By the measuring rate of 5000 measurements/s per measuring channel, high-dynamic measurements can be...

Signal converter for frequency to analogue and serial...

A vibration controller feature used within a closed-loop test system to produce a sine excitation signal for measuring structural response at resonant...

A vibration controller feature used within a closed-loop test system to simultaneously generate a broadband random signal alongside multiple...

SL450 silicone resin provides optimal protection in applications that involve extremely high ambient temperatures. The covering material consists of transparent silicone resin, and it is applied to the measuring point with a brush integrated into...

Proven for decades, the SLB strain sensor is being used in applications that do not require or need to necessarily achieve extremely high accuracy levels, but instead where robust and cost-effective measuring equipment needs to be used. Its main...

The SLB700A/06VA is an active strain sensor fitted with smart electronics, which has been proven for many years in measurements concerning the force shunt. Standard output signals include 0 ... 10 V or 4 ... 20 mA. Its main application fields...

The SLH100 Penny+Giles Hall Effect Linear Sensor has been specifically designed to provide precision cost-effective position sensing, using the proven contactless Hall effect...