Blog Sub Title

The MS5541-30C is the high-pressure version of MS5541C pressure sensor module. It contains a precision piezoresistive pressure sensor and an improved version of the 16 Bit Micropower Sensor interface IC known from the MS5535C. The ESD sensitivity...

The MS5541C is the miniature version of MS5535C pressure sensor module. It contains a precision piezoresistive pressure sensor and an improved version of the 16-bit Micro-power Sensor interface IC known from the MS5535C. Compared to the previous...

The MS5561 is a SMD-hybrid device including a precision piezo-resistive pressure sensor and an ADC-Interface IC. It uses a three-wire serial interface for communication. The module dimensions of 4.75 mm x 4.25 mm and a height of only 1.6 mm allows...

The MS5607-02BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I2C bus interface. It is optimized for altimeters and variometers with an altitude resolution of 20 cm. This barometric pressure sensor...

The MS5611-01BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I²C bus interface. It is optimized for altimeters and variometers with an altitude resolution of 10 cm. The sensor module includes a high...

The MS5803-01BA is a new generation of high resolution altimeter sensors from Measurement Specialties with SPI and I²C bus interface. It is optimized for altimeters and variometers with an altitude resolution of 10 cm. The sensor module includes a...

The MS5803-02BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I2C bus interface. It is optimized for altimeters and variometers with an altitude resolution of 20 cm. The sensor module includes a high...

The MS5803-05BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I2C bus interface. It is optimized for depth meters and altimeters with an altitude resolution of 30 cm. The sensor module includes a high...

The MS5803-14BA is a new generation of high resolution pressure sensors with SPI and I2C bus interface. It is optimized for depth measurement systems with a water depth resolution of 1cm and below. The sensor module includes a high linear pressure...

The MS5803-30BA is a new generation of high resolution pressure sensors with SPI and I2C bus interface. It is optimized for depth measurement systems with a water depth resolution of 2.5cm and below. The sensor module includes a high linear pressure...

The MSC is a very small compression button-style load cell that has a relatively high capacity. This product is available in 15K, 20K and 30K lbf (65kN, 90kN, 130kN)...

The MSP100 series pressure transducers from the Microfused™ line of MEAS, provides stainless steel media compatibility for the price of competing plastic sensors. This sensor has no silicone gel or polymeric media isolation methods to fail in...

The MSP 300 series pressure transducers from the Microfused™ line of Measurement Specialties set a new price performance standard for low cost, high volume, commercial and industrial applications. This series is suitable for measurement of liquid...

The MSP 340 series pressure transducers from the Microfused™ line of MEAS, high volume, commercial and industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water,...

The MT2A is a member of our family of rugged, accurate miniature cable-extension position transducers designed specifically for test applications. One of the major benefits to this sensor its 2-axis 360° rotating mounting bracket to allow for fast...

The MT2 and MT3 miniature series features a highly-tensioned heavy-duty measuring cable that was designed for the high-acceleration demands encountered in flight testing and automotive crash tests. The MT3A offers IP67 protection for testing...

The MT3A is the solution for high-acceleration test applications in potentially wet environments. Just like the MT2A, the MT3A comes in 4 different full-stroke ranges, has a high-tension heavy-duty measuring cable designed for the demands of flight...

The MTA miniature cable extension transducer combines 0.4% accuracy and 50-million cycle potentiometer life into a small package that gives designers high-performance to fit in small assemblies. Measurement ranges available are 0-3" and...

Model MTFS Miniature Tension Load Cell is a small sized tension load cell that is available in capacity ranges from 1 kN to 100 kN (224.8 to 22.5K...

Model MTG-A1 triaxial mounting...

Model MTG-A2 triaxial mounting...

Electro-Sensors MTS-20H standard probe with hanger is commonly used with tilt switch control unit SCU-200 to create a tilt switch system widely used in the process industry to sense the presence or absence of any bulk material. Typical applications...

Electro-Sensors MTS-30H heavy-duty probe with hanger is commonly used with tilt switch control unit SCU-200 to create a tilt switch system widely used in the process industry to sense the presence or absence of any bulk material. Typical...

Electro-Sensors MTSS-20H standard probe with hanger is commonly used with tilt switch control unit SCU-200 to create a tilt switch system widely used in the process industry to sense the presence or absence of any bulk material. Typical applications...

Electro-Sensors Tilt Switch System consists of a Control Unit and a Sensing Probe. It is widely used in the process industry to sense the presence or absence of any bulk material. Typical applications include: high or low bin level alarms, detection...

Remote, fiber optic front end for the Genesis...

Low-drift direct current amplifier for non-legal-for-trade measurement systems with strain gauge full bridges from 80 to 5,000...

Low-drift 4.8 kHz carrier frequency amplifier that can be used in strain gauges in half and full-bridge configurations, inductive half- and full-bridges, LVDT, piezoresistive and potentiometric...

Narrow Pulser Wraps are PVC, aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic...

NG150 is an easy-to-apply, one-component covering material that ensures strain gauge protection. NG150 is applied to the measuring point with the brush integrated into the bottle’s screw cap and cures at room...

Product Brand: Penny &...

Penny + Giles’ new dual redundant output, no-contact rotary position sensor has a slim, low profile rectangular housing (36 x 35mm), and uses a factory programmable 12 bit Hall effect sensor...

Penny+Giles announces a new dual output, no-contact rotary position sensor with the slimmest low profile housing, using a factory programmable Hall effect sensor...

Dual Redundant Output 'No Contact' Rotary Position...

The NRH300DP is a no-contact, Rotary Position Sensor that offers the optimal combination of performance, safety and...

The CAN-Series of conductive inclinometers offers modern SMD- technology in environmentally protected and robust aluminum housing. The inclinometer achieves high accuracy over a wide temperature range. The fast microcontroller works with...

Optical strain gage for K-OP configurable optical sensors...

OL-LT – Optical strain sensor: For measuring high strain in a wide temperature...

OL-W - Weldable Optical Strain Gauge for use in harsh...

Weldable optical strain gage for K-OP-A configurable optical sensors...

A monomode optical fiber chain with 13 fiber Bragg...

A ruggedized monomode optical fiber with 2 or 4 Bragg...

OptiMet-PKF is a ruggedized monomode optical fiber with 13 Bragg...

OptiMet-PKF is a ruggedized monomode optical fiber with 13 Bragg Gratings and temperature...

OptiMet by HBM™ is an optical fiber with high performance coatings and multiple Fiber Bragg Gratings (FBGs) for multipoint measurement of...

• System for transmission of incremental encoder signals in an optical fi...

Optical strain gauge rosette for K-OP configurable optical sensors...

Weldable Optical Strain Rosette for K-OP configurable optical sensors...

Weldable optical strain rosette for K-OP-A configurable optical sensors...

Optical Temperature Compensation Sensor for K-OP configurable optical sensors...

The P-Series of conductive inclinometers offers modern technology in an environmentally protected and robust aluminium housing in IP class 65. The inclinometer achieves high accuracy over a wide temperature range. All P-type inclinometers are...

AMETEK RayelcoTM Position Transducers offer precise monitoring of a traveling element from 0-2" through...

The P101 is a pressure transducer designed to measure pressure under a wide variety of conditions, including hostile environments and temperatures up to 150°C. Its stainless steel body and sealing options render the P101 ideal for use in chemically...

The P105 is a high pressure transducer designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments. The mechanical design and a stainless steel diaphragm allow the sensor to withstand most...

The P1200 Series pressure transducers and transmitters provide high accuracy pressure measurement of liquids and gases. These robust transducers combine hybrid electronics with highly reliable strain gauge sensing technology to offer superior...

The P125 is a high pressure transducer designed for to measure static and dynamic pressure up to 7 000 bar (600 kpsi). The mechanical design and a stainless steel construction allow the sensor to withstand most aggressive liquids and fatigue...

P15 - Pressure Gauge Transducer for Excess...

The P250 is a ready-to-use phenolic resin based adhesive. The P250-R is the phenolic resin for mixing the P250...

P2VA1 / P2VA2 - Pressure Transmitter for High...

P3 Top Class - Pressure Transducer for Maximum...

P3 Top Class BlueLine - Absolute Pressure Transducer for Highest Pressures at Highest...

P3IC / P3ICP Industrial Class - Robust. Powerful. Precise: Pressure Transducer For Industrial...

P3MB / P3MBP - Gage and Absolute Pressure...

P3MBP BlueLine - High Pressure Transducer Up to 15000...

P8AP - Absolute Pressure Transducer for Static and Dynamic Liquid and Gas...

Standard versions of this transducer use a 17-4 PH stainless steel diaphragm to sense pressure (Inconel versions are available for operation in highly corrosive environments). The deflection of the diaphragm is transferred to a double cantilever...

The P9000 Series is a range of advanced, digitally compensated pressure transducers. The unique design of the P9000 pressure transducer utilizes the proven reliability of strain gauge technology and innovative digital compensation electronics. The...

CFT piezoelectric force transducers from HBM are available with measuring ranges from 5 to 120 kN enabling reliable, integrated force measurement, in particular where space is a constraint. The transducers are suitable for monitoring highly dynamic...

The CFW piezoelectric force washers ensures reliable results in assembly and testing. Thanks to their compact design CFW force washers can be used in many different applications. They can be installed in both the force flow as well as the force...

The CHW piezoelectric force washers are ideally suited for use at extremely high or extremely low temperatures. They are used for measurement in hot rolling processes, sealing machines, or for mechanical testing under extreme climatic...

When no other load washer can be installed in your application: PACEline CLP piezoelectric load washers fit virtually anywhere due to their minimal height of typically 4 millimeters. The ideal solution for machine monitoring (e.g. welding machines)...

The CMA charge amplifier guarantees safe data acquisition from all piezoelectric sensors in numerous laboratory and production...

The PACEline CMD digital charge amplifier for piezoelectric sensors provides very high resolution and considerably better performance than others - and has an excellent price-performance...

The PACEline CMD digital charge amplifier for piezoelectric sensors provides very high resolution and considerably better performance than others - and has an excellent price-performance...

The CST/300 piezoelectric strain sensor precisely measures minimal strain ranging from a few µm/m up to its nominal strain of 300 µm/m, which is ideal for indirect force measurement, for instance, in the monitoring of press and welding...

PACEline from HBM are products used in force and strain measurement technology, and based on the piezoelectric effect. PACEline also has the appropriate solution for your application in all areas of quality or process monitoring. The use of PACEline...

In step with your production: PACEline is reliable piezo technology in HBM...

Our PCA-116 family of gage heads was developed for less demanding applications where a balance between cost and performance is paramount. PCA-116 gage heads incorporate a standardized LVDT with repeatability better than 0.0001" (0.0025 mm) and...

The PCA-375 Series gage head is based on the MHR series of LVDTs. The modified MHR has an extended case and spring-loaded plunger. The design goals were simplicity and high reliability with low cost. This goal was met by implementing a plain bronze...

The PCA-375 PR-020 Series gage head is an ultra-compact device that provides accurate measurement in areas with limited space. Designed with a radial cable exit, the gage head easily fits within miniature fixtures and small inside diameters. AC...

Get started right away: The printed circuit board test kit includes all materials you need for strain measurement on...

The PCI-650 Series transmitter is extremely rugged and accurate. It features a spring-loaded guided probe with a hard tip, and a removable electronic module to facilitate installation into pressurized devices such as valves and actuators. The...

PD225 Heavy Duty Pulser Discs are constructed of PVC and can be used with any Electro-Sensors Hall-Effect or Magneto Resistive...

PD455 Heavy Duty Pulser Discs are constructed of PVC and can be used with any Electro-Sensors Hall Effect or Magneto Resistive...

PD725 Heavy Duty Pulser Discs are constructed of aluminum and can be used with any Electro-Sensors Hall Effect or Magneto Resistive...

PDE450 Heavy Duty Pulser Discs are constructed of PVC and can be used with any Electro-Sensors Hall Effect or Magneto Resistive...

For off-line analysis using third-party software packages, Perception offers a variety of export formats for many popular...

Within Perception, customers can define their own formulas to compute results in seconds rather than hours. A "formula database" is used to enter math expressions like CH1*CH2 or MAX@CH1 to compute results immediately when new data arrives. The...

The Perception software not only offers a powerful and extremely fast time domain display of live and stored data, the Basic FFT option also enables to transfer the data into the frequency domain and to display amplitudes over frequency. Therefore...

CSI stands for Custom Software Interface and is a powerful technology which allows software integrators and Perception users to customize and automate (parts of) the Perception software. As opposed to the 'standard' API technology, programs written...

HBM offers a training course for customers interested in CSI programming of Perception. This 2 day event gives programmers a kick-start in using CSI and enables faster implementation of your own written software into Perception. The course is taught...

Real time power calculations and raw data acquisition on inverter driven electrical...

The testing of HV and MV switchgear devices requires advanced and automated analysis capabilities to generate reproducible and accurate test results. The operator’s interaction at this stage of the signal evaluation should be minimal. Real world...

The HV Impulse Testing of transformers, switching devices, bushings and other exposed components requires well defined calculation methods to create reproducible measurement results and a means of automated analysis to increase the testing...

For those users who want to communicate with Perception, or to control connected hardware from within their own application, HBM offers a convenient remote control package that includes two different communication interfaces: RPC and...

Testing of switchgear devices and fuses requires advanced analysis capabilities to generate reproducible and accurate test results. Real world signals may be distorted, carry noise or spikes, but they still have to be evaluated appropriately. The...

The Perception Video Playback option enables synchronized playback of recorded waveforms and video/audio data streams. Load any Windows compatible video file into Perception and get stunning new information about what is happening in your...

The Perception software is designed for fast and reliable processing of large amounts of data and is therefore ideal for high-speed data acquisition. Thanks to the patented StatStream technology Perception enables 10 gigabytes of data to be...

A portable, all-in-one analyzer for fast sound and vibration analysis in the field, laboratory or production...