Blog Sub Title

Cox Series 220 Sonic Nozzles are mass flow instruments designed for the accurate measurement and control of gas flow. The internal design of the nozzle consists of a circular arc that leads to the minimum throat area. Tangent to the circular arc on...

The Celesco SP1 String Pot is a compact, economical and durable device that utilizes a flexible cable, a spring-loaded spool, and a potentiometer to detect and measure linear...

The SP2 String Pot from Celesco is a compact, economical and water resistant device that utilizes a flexible cable, a spring-loaded spool and a potentiometer to detect and measure linear...

The SP3 from Celesco is a compact, economical stringpot that provides a user selectable 4-20 mA or 0-10 Vdc output signal. Simply install this sensor using the handy mounting bracket and connect the appropriate wires for the desired...

This economically priced, high value string pot is the perfect solution for both the OEM and single piece user alike. Constructed with a rugged polycarbonate enclosure and free release tolerant measuring cable, this in-stock string pot provides full...

Speed monitor for control of overspeed, underspeed, standstill and direction of...

Electro-Sensors SpeedTalker DN-BH is a DeviceNet speed sensor with alarms. ODVA conformance tested and housed in a rugged, stainless steel enclosure, the SpeedTalker DN-BH is designed to operate in demanding industrial environments. It features a...

Electro-Sensors SpeedTalker DN-XP is a DeviceNet speed sensor with alarms. ODVA conformance tested and housed in a rugged, explosion-proof enclosure, the SpeedTalker DN-XP is designed to operate in demanding, hazardous and industrial environments....

Electro-Sensors' SpeedTalker-DN (UI) converts pulse frequencies from external sensors to RPM units, providing tachometer measurement of up to two rotating shafts and the status of eight alarm functions over DeviceNet. The SpeedTalker DN (UI) is ODVA...

Model SPI is designed to be a high precision platform load cell. This product is compensated for off center loading and available in capacities ranging from 25 to 150 lbf (111.2 to 667.2...

Model SPI is designed to be a high precision platform load cell. This product is compensated for off center loading and available in capacities ranging from 3 to 15 lbf (13.34 to 66.72...

The SR1 series are rugged, low-cost, high performance string pots built for wet environments and outdoor applications. Designed for the rigors of outdoor construction equipment or the demands of a factory floor, this series is the perfect low cost...

The SRD960 RCV Universal Positioner offers the most advanced technology available on the market today. This includes an infrared interface for wireless operation...

The SRD991 Intelligent Valve Positioner offers the most advanced technology available on the market today. The technology includes, among others, an infrared interface for wireless operation and configuration, a multi-lingual full-text graphic LCD...

Contactless Rotary Sensor - Dual Redundant...

Contactless Rotary Sensor - Single and Dual...

Contactless Rotary Sensor - Dual...

Product Brand: Penny &...

The SRH880P submersible contactless rotary sensor has been specially developed to meet the harsh operating requirements in heavy duty industrial position sensing applications, including construction, agricultural, military and utility vehicles, as...

The SRI990 RCV Analog Positioner with analog input 4…20 mA is designed to operate pneumatic valve actuators. It offers an easy adjustment by means of switches and...

The SRS280 sealed rotary sensor has been specially developed to meet the harsh operating requirements of today´s automotive and motorsport markets, with a number of innovative design features incorporated to overcome the shortcomings of existing...

The SRS880 submersible rotary sensor has been specially developed to meet the harsh operating requirements of today´s heavy duty industrial position sensing applications, including construction, agricultural, military and utility vehicles, as well...

The SS-110 Slow Speed Switch is a complete system that has one adjustable set point for monitoring a single rotating...

Model SSB is a highly accurate beam-type load cell for general purpose applications. This product is available in capacities ranging from 50 to 10,000 lbf (222.4 N to 44.48...

The new Penny+Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 -...

Model SSM is a moderately priced highly accurate sealed load cell for test machine and other general purpose applications. This product is available in capacities ranging from 50lbf to 10K...

Model SSM-FDH is a high temperature sealed load cell for test machine and other general purpose applications. This product is available in capacities ranging from 100 to 1K lbf (444 N to 10...

Model SSMF is a moderately priced fatigue rated sealed load cell for test machine and other general purpose applications. This product is available in capacities ranging from 25 to 2.5K lbf (100 N to 10...

Model SSMH S-type load cell provides a suitable force measurement sensor for applications in coal mining and transfer and other heavy industries where explosive dusts and environment conditions are potentially explosion-hazard rated. Available in 50...

The ST420 is an analog-output shaft speed sensor. It detects magnetic pulses from a rotating shaft-mounted magnetic pulser target (disc or wrap) and outputs a smooth continuous 4-20mA analog signal in direct proportion to the pulse frequency...

STAINLESS STEEL DISC-GUARDS protect your critical disc and sensor or switch from from impact or shock damage. Disc-Guards also help minimize the effects of dust, dirt, grease, and grime. Available for M & SCP-Series Switches and 907, 917 &...

The Type 859 globe control valve with cooling fin bonnet is used in extreme temperature applications. The added bonnet length and fins serve to reduce the heat at the packing area. This allows the standard CV ring packing to be used at higher...

The Type 1499 globe control valve is designed to fit directly into pipelines of the same flange size and rating. Its compact size and light weight make it especially suited to modulating control of medium to low flow rates within the pressure range...

This globe control valve features a 1/2" body with 150 lb ANSI raised face flanges. It is designed to fit directly into pipelines of the same flange size and rating. Its compact size and light weight make it especially suited to modulating control...

Standard Pulser Wraps are PVC, aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic...

...

HBM provides different cleaning agents for cleaning measuring points and measurement objects prior to strain gauge...

Our strain gauge installation kits include all the materials you need for your strain gauge applications—available in beginner and professional...

HBM offers strain gauges available with various creep compensation values specifically designed for transducer manufacturing. We have an archive of hundreds of other strain gauge designs which are already in...

The SuperSC is a economical general purpose load cell with a high force in a compact design. The SuperSC is environmentally sealed and insensitive to off axis loading. This product is available in capacities ranging from 25 to 1000 lbf (100 N to 5...

Product Brand: Penny &...

Product Brand: Penny &...

Product Brand: Penny &...

The T10F torque transducer is well proven and reliable and can be used in many...

Cost-effective, robust and precise. The versatile T40B torque sensor is ideally suited for test bench applications in research and development, as well as End-of-Line tests (EoL) in...

The T12HP torque transducer offers exceptional precision and superior performance for dynamic measurements in test benches to increase efficiency and optimize...

When it comes to torque measurement applications with high demands on torque capacities, HBM’s T12HT torque sensor is the reliable and precise...

The T210 shaft torque sensor is well-equipped to be used universally and is often found in end-of-line applications or in development test...

The T21WN torque transducer is ideal for measuring low torque as well as rotational speed or angle of...

The T22 torque transducer is the compact and quickly integrable solution for measuring torque of up to 1 kNm in many...

Cost-effective, robust and precise. The versatile T40B torque sensor is ideally suited for test bench applications in research and development, as well as End-of-Line tests (EoL) in...

T40CB torque sensor is a compact, short, and mass-optimized torque flange with a central bore of 37.5mm and 46.5mm for high speeds up to 30,000...

The T40FH digital torque flange for high torque up to 300...

The T40FM torque transducer measures dynamic torques up to 80 kN·m precisely and reliably. It offers an excellent price-to-performance ratio, returns reliably precise measurement results and is easy to...

Short T40HS torque flange for rotational speeds up to 45,000 rpm. The perfect solution for motorsport engine or aerospace...

T40MAR Torque Transducer for Monitoring and Control of Ship...

The T40MC torque transducer has been developed for integration into ship engines with neutral installation requirements. It is ideal for monitoring load signals, either for new ship engines or as a retrofit...

T40MS Torque Transducer: from 500 Nm to 2 kNm at 25,000 rpm T40MS is outstanding for its precision, reproducibility and robustness and is particularly well-suited for static and dynamic torque...

The T5 torque transducer offers very high precision and has a broad measuring range. It has been used in thousands of applications for many...

The reference torque transducer TB1A has a particularly high stiffness and can be used with its flat design even in very small...

The reference torque transducer TB2 is an extremely precise and economical solution for the calibration of torque...

The Model 1201 accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 50 g to 1000g and frequency...

The Model 1201F accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 50 g to 1000g and frequency...

The Model 1207F accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 50 g to 1000g and frequency...

The Model 121 is a state-of-the-art, 3-Channel DC Differential Amplifier designed to be used with bridge type or differential output accelerometers, pressure transducers, and load cells. The amplifier offers an exceptionally low input noise floor of...

The Model 130 series are remote in-line charge converters designed to be used with piezoelectric accelerometers. The low noise charge converters feature two fixed gain options that convert the high impedance charge output from the accelerometer to a...

The TE Connectivity model 13201A and 23201A accelerometers are rugged analog accelerometers capable of accurately measuring vibration inputs along each axis. The model 13201A sensor is a single axis accelerometer while the model 23201A is a dual...

...

...

The Model 142 is a remote in-line strain gage amplifier designed to be used with ¼ bridge strain gage instruments. The amplifier features five user selectable gain settings with a gain accuracy of ±0.5% and offers a wide bandwidth to 100kHz. The...

The Model 3022 is a piezoresistive silicon accelerometer packaged in a ceramic substrate with a sealed ceramic cover. The ceramic provides an excellent bonding surface for the customers application specific adhesive. The accelerometer consists of a...

The Model 3028 is a piezoresistive silicon accelerometer packaged on a ceramic substrate with a metal bracket which can be used to bolt the sensor to the mounting location. The accelerometer consists of a micro machined silicon mass suspended by...

The Model 3038 is a hermetically sealed SMD accelerometer designed for high performance applications. The accelerometer incorporates a 2nd generation piezoresistive MEMS sensing element providing outstanding long-term stability. The Model 3038...

The Model 3052A is a silicon MEMS accelerometer with integral temperature compensation. The accelerometer is packaged on a ceramic substrate with an epoxy sealed ceramic cover and is designed for adhesive mounting. The accelerometer is offered in...

The Model 3058A is a silicon MEMS accelerometer with integral temperature compensation. The accelerometer is packaged on a ceramic substrate with a metal bracket which can be used to bolt the sensor to the mounting location. The accelerometer is...

IEPE plug and play accelerometer cable assembly. Standard cable length is 120 inches with 10-32 coaxial connector at each end. Mates with accelerometer models 7100A, 7104A, 7105A, 7108A,...

IEPE plug and play accelerometer cable assembly featuring M3 Coaxial connector and BNC connector. Standard length is 120 inches. Mates with accelerometer model 7101A,...

IEPE plug and play accelerometer cable assembly. Standard cable length is 120 inches. Cable features safety wire holes, #24 AWG tin-plated copper conductors and 3-pin Glenair plug. Mates with accelerometer Model...

IEPE plug and play accelerometer cable assembly featuring 10-32 coaxial connector and BNC connector. Standard cable length is 120 inches. Mates with accelerometer models 7100A, 7104A, 7105A, 7108A,...

IEPE plug and play accelerometer cable assembly for triaxial accelerometers. Featuring 4-pin Microtech connector and three BNC connectors. Standard cable length is 120 inches. Mates with accelerometer models 7131A, 7132A &...

Industrial cable for the 8011 and 8021 condition monitoring accelerometers. The 316A cable includes a 2-pin connector with molded backshell to pigtail leads. It features 2x #22 AWG FEP insulated conductors, braided shield and a flexible TPE jacket....

IEPE plug and play accelerometer cable assembly for triaxial accelerometers. Featuring 4-pin Microtech connector to pigtail leads. Standard cable length is 120 inches. Mates with accelerometer models 7131A, 7132A &...

Industrial cable for the 8011 and 8021 condition monitoring accelerometers. The 318A cable includes a 2-pin connector with molded 90° backshell to pigtail leads. It features 2x #22 AWG FEP insulated conductors, braided shield and a flexible TPE...

Low-noise charge mode plug and play accelerometer cable assembly. Standard cable length is 120 inches with 10-32 coaxial connectors at each end. Mates with accelerometer models 7500A, 7504A, 7505A, 7508A, 7514A &...

Low-noise charge mode plug and play accelerometer cable assembly featuring M3 coaxial connector and 10-32 coaxial connectors. Standard length is 120 inches. Mates with accelerometer model 7501A, 7502A &...

The Model 3255A is a signal conditioned board mountable MEMS accelerometer available in ±25g to ±500g ranges. The package can be mounted in one of two orientations, allowing the measurement axis to be either parallel or perpendicular to the...

Piezoresistive plug and play accelerometer cable assembly featuring #12-48, 5-socket plug. Standard cable length is 120 inches. Mates with accelerometer models 3801A, 4801A, 4810A,...

Piezoresistive plug and play accelerometer cable assembly featuring #12-48, 5-socket plug. Standard cable length is 120 inches. Mates with accelerometer model...

Piezoresistive plug and play accelerometer cable assembly featuring a 5 pin socket plug with straight knurl and strain relief. Standard cable length is 120 inches. Mates with accelerometer...

Instrumentation cable for the model 140 & 142 in-line amplifiers. Featuring shielded model 712 series Binder connector to pigtail leads. Standard cable length is 120...

The Model 3801A is a mV output piezoresistive accelerometer in a rugged hermetic package. The accelerometer incorporates mechanical stops for over-range protection up to 10,000g. The Model 3801A is offered in ranges from ±50 to ±2000g and is gas...

The Model 4000A is an economical signal conditioned MEMS DC accelerometer packaged in an anodized Aluminum housing. The accelerometer is available in ranges from ±2 to...

The Model 4020 & 4030 are low noise, signal conditioned DC accelerometers packaged in a durable molded housing. The accelerometers are offered in ±2g & ±6g ranges with a nominal 0-200Hz bandwidth. The model 4020 is a dual axis...

The Model 40A Accelerometer is a small piezoresistive accelerometer designed to be compliant with the latest SAE J211/J2570 (AUG2009) specifications. This unit features built-in mechanical stops, anodized aluminum alloy housing and flexible cable...

The Model 40B Accelerometer is a small piezoresistive accelerometer designed to be compliant with the latest SAE J211/J2570 (AUG2009) specifications. This unit features built-in mechanical stops, anodized aluminum alloy housing and flexible cable...

The Model 40B Accelerometer is a small piezoresistive accelerometer designed to be compliant with the latest SAE J211/J2570 (AUG2009) specifications. This unit features built-in mechanical stops, anodized aluminum alloy housing and flexible cable...

The Model 4203 is a triaxial motorsport accelerometer designed for harsh installations. The rugged, gas damped accelerometer is ideally tailored for motorsport applications and road vehicle testing. The model 4203 features an 8-pole low-pass filter...

The Model 4332M3 is 4-20mA output MEMS triaxial accelerometer offering both static and dynamic response. The accelerometer is packaged in a corrosion resistant stainless steel housing and is offered in ±2g to ±20g range. The model 4332M3 features...

The Model 4602 is designed for both static and dynamic measurements in critical and demanding applications. It is available in ranges from ±2 to ±200g and offers outstanding thermal performance. It is compensated from -55°C to +125°C. The...