product

TFX-500w Ultrasonic Clamp-on Flow...

TFXL transit time ultrasonic meters measure volumetric flow of clean liquids and is an economical meter designed to replace mechanical flow meters. Ultrasonic waves are transmitted from outside the pipe into the liquid and propagate upstream and...

The TIM-EC interface module offers an extremely flexible solution for transmitting torque and speed signals digitally via the EtherCAT fieldbus...

The TIM-PN interface module offers an extremely flexible solution for transmitting torque and speed signals digitally via the PROFINET fieldbus...

The TIM40 torque interface module provides additional analog and digital outputs to extend the range of applications of your T40 series...

A vibration controller feature within a closed-loop test system for replicating a waveform with precise, real-time, multi-channel...

The TN torque transfer transducer is a non-rotating torque transducer specifically for use as a transfer standard or as a reference transducer in calibration laboratories and it complies with the most stringent accuracy and stability...

The Model TO-8 series is a temperature compensated, piezoresistive silicon pressure sensor packaged in a TO-8 configuration. Integral temperature compensation is provided over a wide temperature range using laser-trimmed resistors. An additional...

...

Contactless Throttle Position Sensor - Dual...

TPT 300 is a contactless temperature measuring system - called pyrometer - based on the detection of infrared radiation. This model is equipped with a lens and an infrared sensor (Thermopile) in front. It has to be pointed at the target...

...

...

The TR400 is a Full Logic Control Process Ratemeter that can display any production rate or time in process easily and...

The TR5000 is a Full Logic Control Process Ratemeter that can display up to three separate values of rate (from up to 2 different shafts) and compare them to programmable set...

Individual Load Cell...

Electro-Sensors Traction Wheel Encoder Assembly consists of a rotary shaft encoder, the traction wheel, the mounting bracket hinge clamp assembly, and the mating...

The Beran 445 Portable TransCal™ provides a simple-to-use, self-contained, battery powered calibrator. It consists of the drive generator, power amplifier, built-in shaker and reference accelerometer, all fitted into a rugged carrying...

The Beran 455...

The Beran 475...

The Preso TransCOIN is an integral standard transmitter mount flowmeter that accommodates most flows, even the most abrasive. Accuracy and reliability are achieved by its rugged construction, practical design, and simple principle of operation. It...

A vibration controller feature that replicates an imported transient pulse to excite a shaker system for the purpose of studying a structure’s dynamic...

The TruBlue 255 Level water level data logger features a 0.05% TEB accuracy for precise water level measurement and a vertical accuracy error of less than one cm in up to 10 meters H2O. Standard internal memory of 8MB and a 10 year battery life...

With our highly accurate, compact design, the TruBlue 275 Baro data logger combines precision, performance, and rugged reliability like no other barometric pressure measurement instrument. The TruBlue 275 Baro features an 8MB internal memory capable...

The MEAS TruBlue 555 Level is our next generation of submersible level measurement transducers designed to withstand the harshest conditions. The MEAS TruBlue 555 Level incorporates a highly media-isolated sensor with internal battery power and...

The MEAS TruBlue 575 Baro is an absolute non-submersible pressure transducer providing local atmospheric pressure data that can be used to compensate one or more submerged, non-vented water level...

The MEAS TruBlue 585 CTD is our next generation of submersible level and conductivity measurement transducers designed to withstand the harshest conditions. The MEAS TruBlue 585 CTD incorporates highly accurate sensors with internal battery power...

Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Major applications are appliances like microwave oven, clothes...

Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Major applications are appliances like microwave oven, clothes...

Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Major applications are appliances like microwave oven, clothes...

Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Major applications are appliances like microwave oven, clothes...

Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Major applications are appliances like microwave oven, clothes...

Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Major applications are appliances like microwave oven, clothes...

Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. Major applications are appliances like microwave oven, clothes...

Features of the TS11 include threaded mounting holes and a center thru-hole design. Compact size allows mounting in tight spaces. Available capacities from 10 Nm to 20K Nm (88.5 lbf-in to 177K...

Features of the TS12 include convenient shaft-style mounting using standard couplings. The compact design allows mounting in tight spaces where rotational clearance is at a minimum. Available capacities from 0.005 Nm to 20K Nm (0.04 lbf-in to 177K...

The TS14 can be used to check torque wrenches and is useful for auditing fastener torque. Available capacities from 1 Nm to 5K Nm (8.85 lbf-in to 44.2K...

Model TS15 features a flange on one side and a female square connection on the other. Useful for bench-checking socket style torque wrenches. Available capacities from 2 Nm to 2K Nm (17.7 lbf-in to 17.7K...

The TS16 features a flange on one side and a male square drive connection on the other. Useful for fastener testing where the flange can be mounted to the bench and the square connection can accept sockets. Available capacities from 2 Nm to 2K Nm...

Model TS17 accepts standard hex-style screwdriver bits, useful for auditing fastener torque and checking screw installation after final assembly. Available capacities from 0.2 Nm to 20 Nm (1.77 lbf-in to 177...

Model TS18 has a convenient thru-hole flange mounting on one and a shaft on the other. Flange has internal pilot and the shaft is keyed per DIN 6885.1. Available capacities from 5 Nm to 2K Nm (44.3 lbf-in to 17.7K...

Model TS19 features an ultra-compact design, allowing the smallest possible flange-to-flange thickness of any reaction torque sensor. Both flanges include pilots. Available capacities from 50 Nm to 10K Nm (443 lbf-in to 88.5K...

Model TS20 Hollow Flange reaction torque transducer features a large thru-hole design. The thru-hole can be used for routing pneumatic or hydraulic lines, or wires, or can be used to pass a motor or actuator shaft. Available capacities from 10 Nm to...

Model TS21 miniature shaft style reaction torque transducer features keyed shafts and a compact package with short overall length. The keyed shafts allow positive engagement with fixtures or couplings. Nominal torque from 1 Nm to 100 Nm (8.85...

Model TS22 overload protected low capacity reaction torque transducer offers very low capacities and features 5x overload protection on capacities up to 2Nm. Commonly used for medical device testing. Capacities from 0.005 Nm to 20 Nm (0.044 lbf-in...

Model TSQ product comes calibrated in clockwise and counter clockwise directions and is available in capacities ranging from 300K to 3,000K lbf-in (34K to 340K...

The TSYS01 is a single chip, versatile, new technology temperature sensor. The TSYS01 provides factory calibrated temperature information. It includes a temperature sensing chip and a 24 bit ?S-ADC. The essence of the digital 24 bit temperature...

The TT-3/100 temperature sensor has the appearance of a strain gauge and is installed in the same way. Installation is also possible on curved surfaces. Another plus for TT-3/100 is its short response time to temperature...

TT-3/100 - The Temperature Sensor that is Installed as Easily as a Strain...

TT420 temperature sensors combine a sensor, signal conditioner and 2-wire loop-powered 4-20mA transmitter into a rugged and compact package. All models are compatible with standard 2-wire 4-20mA current loops and analog...

TT420-LT temperature sensors combine a sensor, signal conditioner and 2-wire loop-powered 4-20mA transmitter into a rugged and compact package. All models are compatible with standard 2-wire 4-20mA current loops and analog...

The TTS transfer torque wrench is used to check and calibrate torque wrench calibration...

Model TXY Load Cell can measure in both X and Y...

Designed to work as part of a system with our modal exciters and matching amplifiers, this unit enhances operation by correcting the position of the exciter’s armature or by applying pre-tensioning force to tension- or piano-wire...

Type 2250 Light is a basic class 1 sound level meter. These sound level meters have been developed specifically for measuring occupational, environmental and product...

Type 2250-S is a compact and rugged class 1 sound level meter. With the addition of specialized applications, the instrument’s functionality can be expanded to meet your needs for whatever task you have at hand, including noise and vibration...

A highly accurate vibration meter for both basic and advanced vibration measurements. Also ideal as as a replacement sound level meter using your existing preamplifier and...

A 2-channel class 1 sound level meter that comes with all you need to get started with accurate environmental, occupational and industrial measurement task; the basic applications package, microphone and...

A highly accurate vibration meter for both basic and advanced vibration measurements using one or two channels. With the addition of preamplifier(s) and microphone(s), the instrument is a class 1 sound level...

With a power output capability of 75 VA, this amplifier is used to drive measurement exciters and small-sized shakers for general vibration...

Similar to Type 2718 but with a higher AC-rating and a wider frequency range, this amplifier can supply up to 180 VA of power to measurement exciters and small...

With a maximum output capacity of 500 VA, this sturdy, reliable amplifier is used to drive modal exciters and small...

With a maximum output capacity of 1250 VA, this powerful amplifier is used to drive modal exciters and small...

A power amplifier designed to power sound sources in building and room acoustic field...

A compact, highperformance, 2 × 35 W power amplifier designed for electroacoustic and general-purpose...

A rechargeable Li-Ion battery module that powers LAN-XI input modules and...

Designed to cover a wide range of sound and vibration measurement...

A dedicated high frequency (>50 kHz) sound and vibration signal module with a frequency range from DC to 102.4...

A cost-efficient and compact solution for high channel count applications, this module is an ideal building block for large systems - with a DC to 25.6KHz input...

A combination of low frequency auxiliary channels and dynamic inputs which supports high speed tacho...

Designed for high-frequency applications with bridge type...

A versatile 8‐channel 25.6 kHz LAN‐XI data acquisition module with two independent CAN bus inputs ideal for automotive NVH applications both in the lab and in the...

VSound is a sound‐generating system for experiencing new vehicle sounds from both a vehicle interior and exterior perspective. Its primary purpose is in‐vehicle virtual NVH prototype...

Designed for applications where system excitation is required, such as audio and electro-acoustic test...

Designed for high frequency applications such as transducer calibration and underwater defence...

An impact sound generator for measuring impact sound...

Protects Types 2250, 2250-Light and 2270 sound level...

Connects a single LAN-XI analysis module and battery module together to create a wireless...

Portable frame that holds up to 5 LAN-XI modules of your...

Portable frame that holds up to 11 LAN-XI modules of your...

Our intuitive and portable system that quickly records noise, vibration and harshness (NVH) data, including CAN data, and analyzes results immediately, using a...

Log noise indoors using the MATRON 4 kit with manual activation of sound...

Part of the LAN-XI family, LAN-XI Light is a rugged standalone, four-channel data acquisition module that supports CCLD transducers – perfect for use in the lab or...

A manikin designed for recording in-vehicle noise for sound quality evaluation and testing. Also used for sound optimization of consumer appliances, office equipment, power tools, marine equipment and heavy...

Designed to be used for in situ electroacoustics tests on, for example, telephone handsets, headsets, audio conference devices, microphones, headphones, hearing aids, hearing protectors and smart...

Designed to be used in-situ electroacoustics tests on, for example, telephone handsets, headsets, audio conference devices, microphones, headphones, hearing aids, hearing protectors and smart speakers. Includes Handset Positioner Type...

Designed for very high-frequency measurements in confined...

Designed for very high-frequency measurements in confined...

Designed for very high-frequency measurements in confined...

Designed for very high-frequency measurements in confined...

Designed for electroacoustical measurements on insert earphones and headphones to be carried out under well defined acoustical...

Designed to enable electroacoustical measurements on insert earphones and headphones to be carried out under well defined acoustical conditions. Fulfils requirements of IEC 60318-1 and has an acoustical impedance similar to that of the human...

Designed for measurements on earphones coupled to the ear by ear inserts such as tubes or ear moulds or...

Designed for near-field measurements in small or awkward places or in harsh environments where a conventional microphone would be...

Designed for use in permanent, semi-permanent or portable noise-monitoring...

Designed for measurements on handset telephones requiring an IEC 60318-1 coupler, including handsets with high impedance earpiece where sealed conditions are...

Designed for measurements in transport noise measurements, architectural acoustics and...

Designed for measurements in transport noise measurements, architectural acoustics and...

Designed for measurements in transport noise measurements, architectural acoustics and...