product

Compact and accurate control potentiometer with digital display replaces traditional machine...

The AP820 2D/3D sensor performs very well on shiny or jagged targets and in environments with high ambient light. The sensor’s auto gain and high dynamic range allow for measurement in complex applications, even edge scanning on sharp...

AccuStar®-EA takes low cost tilt sensing to the next level by combining 100% solid state technology with digital calibration and proprietary filtering techniques. The result is an extremely accurate tilt sensor with improved linearity, expanded...

The new AccuStar® IP-66 is designed for rugged industrial and outdoor applications. The die-cast, powder coated aluminum housing is suitable for the most hostile environments. Multiple input / output configurations provide for ease of...

The AccuStar® IP-66 is a 4 to 20mA loop powered clinometer specifically designed for industrial and outdoor applications. Rated to IP-66, the rugged die-cast, powder coated aluminum housing provides protection in the most hostile...

Acoustical arrays rapidly produce detailed noise maps of kinds of noise sources. Our large selection ranges from small, two-microphone units up to arrays with several hundred microphones, for many different...

Download your copy of the Acuity 2020 Laser Catalog including triangulation, time-of-flight, 3D scanners and confocal laser...

The 7-inch Touch Panel Display can control Acuity laser sensors and display their distance readings. Using serial communications, this smart terminal includes software applications for calculating thickness and other dimensions without the need for...

ADS Classic PC diagnostic back...

Cable M12 to...

Suitable for clamp mounting, the AF111 range have a threaded, unguided core assembly to simplify...

Mounting is by self-aligning rod end bearings, and the outer sliding sleeve protects the movable core whilst enhancing the rigidity of the transducer during...

The AG100 series is a media isolated digital pressure gauge featuring multiple measurement units, min/max readings, selectable tare/zero and an automatic power off to conserve battery power. Also, a back-light provides improved visibility under...

The AG200 is a digital pressure gauge that offers a 4-20mA output signal with a large LCD display. Utilizing Krystal Bond™ Technology, the AG200 provides the same quality and performance as AST's sensors, but through a local readout with a...

The AIFO-200 is an interface device used between an analog signal and a frequency-input device typically used in applications where a process is monitored by a transducer, PLC, PC, or some other device that provides a 0–10 Vdc or 4–20 mA signal....

AK22 is a tough, kneadable putty that adheres to virtually any material. The putty is kneaded by hand onto the measuring point. It is recommended to use AK22 covering putty along with ABM75 aluminum foil, or even with a third layer of SG250 silicone...

Jewell Instruments AKA Series Accelerometers are an excellent choice for cost to performance trade-off. The AKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.  LC version...

Jewell Instruments AKA Series Accelerometers are an excellent choice for cost to performance trade-off. The AKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.  SC version...

Jewell Instruments AMA Series Accelerometers are an excellent choice for cost to performance trade off. The AMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.  Analog...

A comprehensive list of common part...

This style is designed to meet the demands for more complex control systems in off-highway, specialist vehicle applications. The 'AMF' range of ergonomic multifunction hand grips can be fitted with a combination of analog outputs, push button and...

The Jewell Instruments model AMH is a high precision MEMS inclinometer. Standard units are available with 0-5V, 0.5-4.5V, or 4-20mA output options. All AMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output...

The model AMI is a high precision MEMS inclinometer with built-in thermal compensation. Standard units come with 0-5V, 0.5-4.5V or 4-20mA output options. All AMI series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and...

The Jewell Instruments model AML is a low cost analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up to 1m. Custom...

The Jewell Instruments model AMS is a mid-level performance analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up...

The Anglestar® Protractor System (APS) is a ready to use, stand alone system for angle measurements. The system incorporates a special AccuStar I ratiometric electronic clinometer, a digital display, and a standard four foot cable. This system will...

The AngleStar® Protractor System (APS) is a ready to use, stand alone system for angle measurements. The system incorporates an AngleStar Electronic Clinometer, a digital LCD display, and a four foot interconnecting cable (cable lengths up to 200...

The Model PFB approved Fire Pump System features a round pitot tube. It is a primary flow sensor designed to produce a differential pressure that is proportional to the flow. It is a highly reliable averaging pitot tube which generates a pressure...

...

...

...

...

...

...

The AP1000 Series Digital Tachometer is a complete rate monitoring system that combines accuracy and reliability in a rugged, compact...

The AR100 is one of the smallest laser measurement sensors in the world. The ultra-compact AR100 comes with ranges from 10mm  to 500mm with a single case size.  In short, the AR100 is perfect for applications with tight size and mass budgets that...

The AR1000 laser distance meter is ideal for crane and hoist applications, position measurement, or for monitoring fill levels of bulk material accurately measure distances of 30 meters. Longer ranges to 150 meters are possible with the use of...

The AR200 laser measurement sensor is a compact, durable, and reliable sensor built for many industries including the lumber, medical and high-tech industries. Five different models with ranges up to 100 mm (4 in) and accuracies down to 12-microns...

AR2500 laser sensors are Acuity Laser’s ultra-compact rangefinder models. This eye-safe rangefinder has a measurement frequency of up to 30 kHz and can measure the distances to natural targets up to 30m away or to retroreflective targets 260m...

The AR3000 distance measurement sensor is ideal for extremely long-distance applications for monitoring the position or speed of targets and objects.  Eye-safe measurement with speeds to 2 kHz up to 300m standard. Longer ranges to 3000m are...

The AR500 is a compact triangulation laser sensor that excels in its versatility. The AR500 is available with measurement ranges from 5mm (0.2 in.) to 1000mm (39.4 in). Options include red or blue laser, power ratings, internal heater, air jacket,...

The AR550 high speed laser sensor is Acuity’s fastest triangulation device. At sampling rates up to 70kHz, these sensors are typically used for applications such as vibration measurements, scanning of roads, vehicle crash test, and ballistic...

The AR700 laser displacement sensor is Acuity’s top of the line, most precise, laser triangulation sensor. Measurement ranges from 0.125 inches up to 50 inches and resolutions as low as one-sixth of a micron. Sampling speeds up to 9.4kHz and...

ARAMIS is a high-performance 3D camera system for full-field and point-based measurements. Systems with up to 2000 frames per second, combined with high stability, process reliability and usability make ARAMIS an ideal measuring system for high-end...

The modularly expandable ARAMIS Adjustable camera system is a cost-effective entry point into the world of GOM metrology. It provides precise 2D and 3D coordinates for the analysis of statically or dynamically strained components and can be used...

The AS2100 is a highly accurate laser distance sensor designed to work well outdoors, and difficult targets. Measure +/-1mm from distances over 500m...

The JEWELL ASB Series Angular Accelerometer is a general purpose devise made for industrial, commercial, and aerospace sensing requirements. Its many applications include antennae stabilization, torque measurement, flight control systems, automotive...

The ASM Angular Accelerometer is configured specifically to yield a combination of miniaturization, high accuracy, and ruggedness. The ASM Series has been designed to minimize thermal errors associated with outdoor applications. The Jewell ASM...

The AST2000 is an ASIC-compensated, high quality, industrial pressure transducer designed for use in the measurement of liquids and gases. Intended for medium to high volume applications requiring excellent performance, the AST2000 succeeds by...

The AST2000 series is now available for hydrogen pressure sensing applications. Tested to a variety of hydrogen and automotive standards including TUV and EIHP, the AST2000H2 pressure sensor series combines the best mechanical design for hydrogen...

The AST20HA is a digitally compensated 0.1% pressure transducer / pressure transmitter that offers high performance over temperature. Krystal Bond Technology alone offers excellent non-linearity and non-repeatability performance. When it is combined...

The AST20PT is a digitally compensated pressure and temperature transducer / transmitter, offering measurements from a single process point, reducing process penetration points and leaks. Krystal Bond™ Technology alone offers excellent...

The Model 20SW is a solid state stainless steel pressure switch designed for use in a variety of applications. Applying digital compensation, this product offers top performance over a wide temperature range. Utilizing Krystal Bond Technology™,...

The AST3100 is a low cost, high quality all stainless steel media isolated Pressure Transmitter intended for use in the measurement of gases and liquids compatible with stainless steel. The AST3100 is suitable for automotive, industrial,...

The AST3200 Series is a OEM low pressure sensor intended for high volume applications that require the low pressure measurement of non-corrosive liquids and...

The AST4000 Industrial Pressure Sensor can be constructed as a millivolt output pressure sensor, amplified voltage output pressure transducer, or 4-20mA loop powered pressure...

American Sensor Technologies, presents the AST4100 as a compact, price-competitive stainless steel pressure sensor. Compatible with a wide range of liquids and gases over pressure ranges up to 10,000 PSI, the AST4100 covers a diversified variety of...

In order to simplify installation of pressure sensors for control panel applications, American Sensor Technologies offers the AST4200 Panel Mount Pressure Sensor. This innovative sensor is mounted directly through the panel without the need for...

The AST4300 is a Class I Division 2 non-incendive pressure transmitter for use in hazardous areas. In addition to its rugged construction and industry-leading price-to-performance ratio, the AST4300 pressure transmitter is the solution for pressure...

The AST43LP is a low pressure Class I Division 2 stainless steel pressure transmitter / pressure transducer for use in hazardous areas. In addition to its rugged construction and the best price-to-performance ratio in the industry, the AST43LP is...

The AST4400 is an intrinsically safe pressure transmitter with a wide variety of options. With its rugged construction and the best price-to-performance ratio in the industry, the AST4400 is the solution for pressure measurement in Intrinsically...

The AST4401 is similar to the AST4400 intrinsically safe pressure transducer, but offers the additional approval for Groups A and B. The maximum supply voltage allowable is 15.5V...

The AST44LP is a low pressure Class I Division 1 intrinsically safe pressure transmitter / pressure transducer Groups C, D when installed with an approved barrier. In addition, AST44LP can be configured with approvals such as ATEX/IECEx Exia and...

The AST4500 and AST4510 submersible level sensors are approved to Class I Div 1, Groups C and D for use in intrinsically safe areas with an approved barrier. From 0-1 to 0-100 PSI pressure / level measurement, this submersible pressure transducer is...

The AST4520 Flush Submersible liquid level sensor is the cost effective solution for level monitoring of turbulent tanks with viscous media. Approved to UL/cUL913 Class 1 Division 1 IS, Groups C and D with an approved barrier, the product ensures a...

The AST4530 submersible pressure transducer is constructed using PVDF material and a PTFE diaphragm. Designed to measure liquid level of harsh liquids and chemicals, the AST4530 features submersible PVDF cable, cord grip and housing. The AST4530...

The AST45PT is a combined pressure and temperature transmitter for accurate liquid level measurement. For pressures from 0-1 to 100 PSI that require a wide range of media compatibility, the AST45PT submersible series is an excellent solution to...

The AST4600 explosion-proof pressure transmitter is CSA Class I Division 1 approved for use in hazardous areas. Constructed with a simple-yet-rugged design, this pressure transmitter stands up to a variety of explosion-proof applications where price...

AST46DS explosion proof pressure transducers feature the latest advances in transducer technology. Capable of using a power supply as low as an 8VDC and low current consumption, the AST46DS pressure transducer can operate in remote areas with...

AST46HA high accuracy explosion-proof pressure transmitter is CSA approved for use in hazardous areas. Applying digital compensation, this product offers top performance over a wide temperature range. Utilizing Krystal Bond Technology™, the...

AST46PT high accuracy Explosion-proof Pressure/Temperature Transmitter is CSA approved for use in hazardous areas...

The Model 46SW is a high accuracy Explosion-proof Pressure Switch, designed for use in a variety of applications. Applying digital compensation, this product offers top performance over a wide temperature range. Utilizing Krystal Bond Technology™,...

he AST4700 is a competitively priced, high quality pressure transducer intended for the use of measurement of liquids and gases. Utilizing Krystal Bond™ Technology, the AST4700 offers a one piece stainless steel sensing element free of welds,...

The AST4710 stainless steel absolute pressure transducer is built for applications requiring absolute pressure measurement of liquids and gases. Due to its stainless steel construction, welded housing and high shock and vibration ratings, the...

Manufactured to withstand pressures up to 60,000 PSI, the AST47HP high pressure sensor is the best solution for high pressure and high cycle systems such as hydraulic pressure or diesel common rail...

The AST47SM steel mill pressure transmitter package is able to perform in rugged environments as well as meet the high demands of the steel and aluminum industry. The pressure port design is compatible with the high pressure spikes when the slab is...

The AST5100 Differential Pressure Transmitter is your accurate pressure sensing device for low differential pressure. With a differential pressure ranges as low as 0 to 5" water column (12.5mbar), this product can be used to measure flow across an...

The AST5300 wet/wet differential pressure transducer offers a maximum line pressure of 1,500 PSI. The AST5300 has no oil filled cavities or O-rings, eliminating risk of contamination and maximizing safety. Available in 4-20mA or voltage outputs,...

AST5400 wet/wet differential pressure transducers can measure the differential pressure of liquids or gases with line pressures up to 5,000 PSI (350 bar) and a turn-down ratio of 15 to 1. Using Krystal Bond Technology, the AST5400 differential...

The ASXC Sis a force balanced servo accelerometer that uses a fluid-filled ring chamber to measure angular acceleration. It is currently used in a wide variety of applications including many military and aviation flight controls including autopilot...

Model AT101 is an axial torsion transducer for measuring both torque and force in a single sensor. Typical applications include bearing test and material test...

Model AT101 is an axial torsion transducer for measuring both torque and force in a single sensor. Capacities from 0.5 kN to 20 kN Force and from 5 Nm to 50 Nm...

Model AT102 is an axial torsion transducer for measuring both torque and force in a single sensor. Capacity 10 kN Force and 10 Nm...

Model AT103 is an axial torsion transducer for measuring both torque and force in a single sensor. Capacities: 10kN/10Nm &...

The Measurement Specialties analog transducer amplifier is a general purpose, AC line-powered LVDT/RVDT conditioner featuring state-of-the-art design principles. The new SMT (Surface Mount Technology) design uses an embedded microprocessor to...

The ATEX/IECEx load shackles are designed for lifting and weighing in rugged or harsh environments, and are rated for operation in Zone 1 and 2 hazardous areas. The basic shackle uses the Crosby G2130 (1 to 25MT or 2.2K to 55.1K lbf) and G2140 (40...

Having the right tool for the job makes you efficient – and that is good business. In this article, we look at some of the things you should consider before deciding on whether to replace your old sound level...

This solution is all you need to easily conduct and report on environmental noise surveys to ensure regulations compliance and investigate noise...

This sound level meter platform houses the solution that gets your job done faster and easier. Controlled via smart-device apps tailored to your task, get your work done with...

This SLM-based survey solution simplifies your job of ensuring standards compliance and employee safety, including the data for selecting hearing...

Exhaust noise measurement solution for testing light vehicles and noise level enforcement with a streamlined workflow and toolset that minimizes the risk of error while still requiring minimal...

Designed for general purpose vibration measurements on larger...

Designed for simultaneous high-level measurements in three mutually perpendicular...

Designed for simultaneous high-level measurements in three mutually perpendicular...

Designed for general purpose vibration...

Designed for high sensitivity, high frequency vibration...

Designed for high-level, high-frequency measurements in confined spaces and on delicate...

Designed for high-frequency measurements in confined spaces and on delicate...

Designed for general purpose low-frequency...