product

...

Designed for use with Generator, 4/2-ch. Input/Output Module Type...

UA-3101 is the default front panel for LAN-XI CAN Bus Module Type...

Designed for use with Generator, 4/2-ch. Input/Output Module Type...

The new Penny+Giles model UCM is a low voltage dc powered Universal Conditioning Module designed to operate with a wide range of LVDTs, RVDTs and other analogue inductive transducer...

The UDS1000 Reverse Rotation Detector is a complete system, designed to detect shaft...

The UFX hand-held ultrasonic Doppler flow meter is a cost-effective flow measurement device for closed-pipe liquid systems containing suspended particles or gas bubbles. A non-invasive, hand-held transducer is placed on the outside of metal or...

...

...

...

Model ULC is the world’s most accurate ultra-low capacity load cell measuring loads from 0.5 to 2 N (50 grams to 500...

4 Channel, 200kS/s Universal Card, 128MB RAM (16 MS/ch) -...

The low cost UltraStable 300 series incorporates stainless steel isolation, and a wide range of standard pressure ranges and electrical outputs in a very compact package. This product uses Measurement Specialties’ UltraStable technology that...

All measurement tasks are supported including Stationary Processing, Transient Processing and Sine...

Model V-Brass Series is a Venturi style flow meter of the “Low Pressure Loss” design. It is machined according to exacting specifications using high quality materials. This unit is produced from solid brass hex bar and comes with NPT or sweat...

The V-Series of conductive single or dual axis inclinometers offers a modern electronic in an environmentally protected and robust aluminium anodized housing. This fully calibrated inclinometer is available with analogue voltage output signals or...

A Reference Tube is an evacuated, sealed vacuum gauge tube accurately calibrated to precisely simulate a gauge tube at a given operating pressure. It is electrically equivalent to the metal and glass gauge tubes used with THI instruments. It permits...

The Venturi Model LPL (Low Pressure Loss Venturi Design) is a Venturi Nozzle design differential pressure flow device. The Low-Loss Design with over 35 years of proven field performance in a wide variety of applications provides reduced operating...

The Model PFV FM approved Fire Pump System features the Preso CV Venturi. The CV is a differential pressure element designed to accurately measure flow. It can be installed in any position with minimal straight pipe requirements (5 pipe diameters up...

The Venturi Model SSL (Classical Venturi Design) is a Hershel/Classical design differential pressure flow device. The Venturi flow meter restricts the flow at its throat, increasing the velocity of the fluid, and measures the pressure difference of...

The Venturi Model SSM is a Venturi Nozzle design differential pressure flow device. The Preso Hydraulic pure static design utilizes the proven classical ASME and ISO standards for highest accuracy, predictability and repeatability. The flow...

The Venturi Model VILPL (Low Pressure Loss Venturi Design Insert) is a Venturi Nozzle design differential pressure flow device. The Preso VILPL low-loss design is also available in the stainless steel. The all 304 stainless steel construction...

The Venturi Model VISSM (Nozzle Design Venturi Insert) is a Venturi Nozzle design differential pressure flow device. The Preso hydraulic pure static design is also available in the Model VISSM. This unique hydraulic shape generates a flow condition...

Badger Meter’s Vision Turbine Flow Meter is designed to improve the performance of a wide range of products. Suitable for measuring low-viscosity and non-aggressive liquids, it features simple mechanical construction to extend service life without...

For connecting T20WN, T21WN, T22 torque...

The PT8000 series is part of our industrial line of cable-extension transducers. Designed for rugged environments, the PT8000 series is a workhorse for applications such as metal forming, wet-end paper processing and injection molding. Measurement...

Prevents cable from ever reaching damaging velocity during a free-release. Ideal for applications requiring frequent connecting and disconnecting. Provides safer...

Penny+Giles have introduced a new capability using the latest Hall effect sensor technology, which has been developed to meet the demands of OEM valve manufacturers and machine...

The VPT351 can provide accurate, positional measurement over a span of 10-25mm and is designed specifically for the monitoring of hydraulic...

The Electro-Sensors VS1 Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. When used to...

Electro-Sensors VS1 XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. When used to...

Electro-Sensors VS2 Vibration Monitor is a rugged and compact, stand-alone vibration monitor ideal for use on vibratory conveyors or other deliberately vibrating machinery. It is engineered to protect against catastrophic failure associated with the...

Electro-Sensors VS2-XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. When used to...

Teledyne Hastings Instruments (THI) VT-Series Vacuum Gauges are the original models that have generated repeat customers for over 60 years. Their reputation is built upon exceptional stability, accuracy, and reliability under the most demanding...

Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of...

Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of...

VY full bridge strain gauges (SGs) have 4 measuring grids, which are arranged so that each is offset to the next at an angle of 90°. Typical applications for full bridge SGs include measurements on tension/compression bars and torsion bars and...

The W1ELA/0 displacement transducer in plunger version enables precise measurement of short displacements directly during the...

...

Displacement transducers of the WA-L with loose plunger series feature impressively reliable and extremely precise measurement results. They have been tried and tested a thousand times over in the most diverse...

Displacement transducers of the WA-T series in the probe version feature impressively reliable and highly accurate measurement results. They have already been tried and tested a thousand times over in the most diverse...

WI displacement sensors are extremely economical and highly compact, ensuring reliable results for displacement measurements for a wide variety of...

The WindMETER system is a reliable monitoring solution specifically designed to monitor wind generator blades. It combines sensors and data acquisition hardware to provide real-time measurements, and is designed to integrate and upstream the...

Our range of cables, stranded wires, and wires will give you the option to buy the exact accessories that you need for wiring strain gauges in transducers and...

Model WMC is excellent for industrial applications because of its stainless steel, sealed, environmentally protected construction. This product is available in capacities ranging from 1K lbf to 10K lbf (5 kN to 45...

Model WMC is excellent for industrial applications because of its stainless steel, sealed, environmentally protected construction. This product is available in capacities ranging from 5 to 500 lbf (22 to 2200...

Interface Model WMC Rod End Load Cell is excellent for industrial applications because of its stainless steel, welded, environmentally protected construction. This product is available in capacities ranging from 15K to 200K lbf (66.7kN to 889.6...

Model WMCFP is excellent for industrial applications because of its stainless steel, sealed, environmentally protected construction. This product has overload protection which is an excellent safeguard in rugged applications. This product is...

Model WMCP is excellent for industrial applications because of its stainless steel, sealed, environmentally protected construction. This product has overload protection which is an excellent safeguard in rugged applications. This product is...

...

Model WTS 1200 Standard Precision LowProfile™ Wireless Load Cell are designed for general purpose applications requiring a wireless load cell that is compensated for eccentric loads. This load cell can transmit distances up to 2000 feet (610...

Transmitter Module...

The WTS-AM-1E connects to strain bridge transducers such as load cells, torque sensors, strain gauges and pressure modules and forms part of the WTS modular telemetry system. The data transmitted by the WTS-AM-1E can be received by multiple WTS...

The WTS-AM-1F transmitter connects to strain bridge transducers such as load cells, torque sensors, strain gauges and pressure modules and forms part of the WTS modular telemetry system. Transmits at 2000/samples per...

The WTS-AM-2 connects to 0-10 V conditioned sensors such as pressure, %RH, inclinometer, accelerometer, depth, vibration, temperature and flow. It forms part of the WTS modular telemetry...

The WTS-AM-3 transmitter module connects to 4-20 mA conditioned sensors such as pressure, %RH, inclinometer, accelerometer, depth, vibration, temperature and flow. It forms part of the WTS modular telemetry...

The WTS Telemetry Antenna WTS-ANTA, WTS-ANTB and WTS-ANTC can be integrated with any of the WTS modules which are factory fitted with UFL antenna...

The WTS-AR Wireless Repeater Module which will allow the WTS telemetry system modules to span around obstacles, increase range and coverage by retransmitting received...

The WTS-BS-1 is a roaming handheld allowing the operator to cycle the display between all available transmitter modules and forms part of the WTS modular telemetry system. It does not require pre-configuration of associated transmitters and will...

The WTS-BS-1-HA Wireless Multiple Transmitters handheld displays data from up to 12 wireless transmitter modules and forms part of the WTS modular telemetry system. It provides either a summed total from all selected transmitters and the ability to...

The WTS-BS-1-HS handheld displays data from any of the WTS wireless transmitter modules and forms part of the WTS modular telemetry system. It provides a point to point connection to a single...

The WTS-BS-3E is one of a range of base stations that are required for configuration and calibration of the WTS modular telemetry system. Base stations can also be used for data collection systems by making available the WTS wireless transmitter...

The WTS-BS-4 is one of a range of base stations for the WTS modular telemetry system. It has a USB interface, is housed in an IP67 enclosure and has better coverage than the...

Model WTSLP Wireless Stainless Steel Load Pin is great for lifting applications where short or long distances are involved. This product can transmit wirelessly up to 600 meters in distance (clear line of sight) to a handheld display or USB base...

The WTSSHK-B range of telemetry load shackles are manufactured using the Crosby™ G2130 (12 to 15 MT / 26.5K and 33.1K lbf) and G2140 (40 to 120 MT / 88.2K to 265K lbf) shackles. The built in radio telemetry electronics operates on the 2.4GHz...

The WTSSHK-B-HL range of telemetry load shackles are manufactured using the GN rope H10 shackle. Suitable for use in a wide range of industrial and marine heavy lift weighing applications, these load shackles provide a robust and effective method of...

WTSSHK-B-JR Wireless Crosby™ Bow Load Shackle range of telemetry load shackles are manufactured using the Crosby™ G2130 shackle. Suitable for use in a wide range of lower capacity industrial weighing applications, these load shackles are...

The WTSSHK-D range of telemetry load shackles are manufactured using the Crosby™ G2150 shackles. Versions are also available using the popular GreenPin™ range of shackles. The built in radio telemetry electronics operates on the 2.4GHz license...

WTSTL is great for lifting applications where short or long distances are involved. This product can transmit wirelessly up to 600 meters in distance (clear line of sight) to a handheld display or USB base station. Available in capacities  from 11K...

X120 adhesive is intended for installing optical fibers, primarily OptiMet PKF. X120 is easy and fast to...

X280 cold curing adhesive is always a good choice for strain gauge installation, in cases where strain measurements need to be taken at higher temperatures, but a hot curing adhesive cannot be...

X60 is the proven fast curing adhesive for experimental tests, porous materials, and use at low temperatures. X60 adhesive is very easy to use and is also suitable for fixing cables and sensors in...

The miniature size and lightweight of the XFC200R facilitates testing where these conditions are necessary. Unlike sensors with flat force application surfaces, the XFC200R incorporates a spherical load button resulting in more precise measurements....

The miniature size and light weight of the XFC205R facilitates testing where these conditions are necessary. Unlike sensors with flat force application surfaces, the XFC205R incorporates a spherical load button resulting in more precise...

The XFL212R series is an extraordinarily thin miniature load cell with a temperature compensation module integrated into the output cable. This design allows Measurement-Specialties to manufacture extremely small sensors without sacrificing thermal...

The XFL225D series is a very flat miniature load cell with a temperature compensation module integrated into the output cable. This design allows Measurement-Specialties to manufacture extremely small sensors without sacrificing thermal zero and...

The XFTC300 series has been specifically developed to measure tension and/or compression in static and dynamic applications. The miniature size and light-weight facilitate testing where these conditions are necessary. The sensing element is fitted...

The XFTC301 series has been specifically developed to measure tension and compression in static and dynamic applications. The miniature size facilitates testing where space is at premium. The sensing element is fitted with a fully temperature...

The XFTC302 series has been specifically developed to measure tension and/or compression in static and dynamic applications. Fitted with metallic strain gages in a Wheatstone bridge circuit, the XFTC302 has the capacity of measuring heavy loads of...

The XFTC310 series has been specifically developed to measure tension and/or compression in static and dynamic applications. The miniature size and light weight facilitate testing where these conditions are necessary. The sensing element is fitted...

The XFTC311 series has been specifically developed to measure tension and compression in static and dynamic applications. The miniature size facilitates testing where space is at a premium. The sensing element is fitted with a fully temperature...

The XFTC320 series has been specifically developed to measure tension and/or compression in static and dynamic applications. The miniature size and light- weight facilitate testing where these conditions are necessary. The sensing element is fitted...

The XFTC321 series has been specifically developed to measure tension and compression in static and dynamic applications. The miniature size facilitates testing where space is at a premium. The sensing element is fitted with a fully temperature...

The XFTC322 series has been specifically developed to measure tension and/or compression in static and dynamic applications. Fitted with metallic strain gages in a Wheatstone bridge circuit, the XFTC322 has the capacity of measuring heavy loads of...

vailable in a range of measurements and a variety of mounting threads, the XFU400 is easily installed. Its miniature size facilitates testing where space is at a premium. The sensing element is fitted with a fully temperature compensated Wheatstone...

Measurement Specialties’ XL403A analog accelerometers offer precision measurements over the entire the -40ºC to +85ºC temperature range. Each DC-coupled output is fully scaled, referenced, and temperature compensated. Accuracy is improved by...

...

The XPM5 is a miniature transducer designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments. The all-titanium construction and flush diaphragm allow the sensor to withstand most corrosive...

The XPM10 is a miniature transducer designed to measure static and dynamic pressures in high temperatures up to 220°C (unamplified models). It is made of stainless steel and available in standard ranges from 0-10 to 0-350 bar . The XPCM10...

The XPM10 is a miniature transducer designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments. It is made of stainless steel or titanium and is available in standard ranges from 0-1 to 350...

The XPM4 is a miniature transducer designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments. The all-titanium construction and flush diaphragm protect the sensor against most corrosive...

The XPM6 is a miniature transducer designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments. It is made of stainless steel and is available in ranges from 0-100 to 0-1000 bar . Option "MH"...

The XS-B Series was designed for micro applications. It is particularly well suited for multi-point measurement of small components. Core weight is virtually negligible. Manufacturing requires extremely sophisticated assembly techniques. Coils are...

The XS-C Series satisfies those applications involving measurement and control in pressure-sealed chambers, e.g., hydraulic actuators and pressure vessels where bulkhead mounting is permitted. It is a sealed, heavy-walled LVDT suitable for operating...

The XS-D Series is particularly well suited for measuring relatively large displacements, but where installation space is limited. The XS–D has a substantially greater displacement range than standard LVDTs but without the accompanying increase in...

The XS-ZTR Series LVDT is designed for measuring displacement at very high and cryogenic temperatures. The XS-ZTR operates continuously at 550°C and will survive 650°C for several hours. The XSZTR is also designed to perform within specification...

XY strain gauges of the T rosettes type have 2 measuring grids arranged at a 90° degree offset from each other. Typical applications for these strain gauges include analysis of a biaxial stress state with known principal directions as well as...

Types XY1, XY2 and XY4 are V-shaped strain gauges (SGs) with 2 measuring grids arranged at an angle of about 45° to the SG axis. Typical applications for these strain gauges include measurements on torsion bars and determining shear stresses as...

Determining residual stresses in materials (e.g. during casting, welding and forming processes) becomes easy with HBM's special strain gauges. These special strain gauges for residual stress analysis are available for precise and safe high-speed...