product

The Jewell Instruments JMA-165 MEMS accelerometers are a cost effective and viable alternative to traditional force balance designs. This mighty little sensor is CENELEC, AREMA certified, and RoHS compliant. Integrated HEATER...

±5V output version.  The JMA-100/200/300 series is available in single (JMA-100), dual (JMA-200) and triple (JMA-300) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS...

4-20mA output version. The JMA-100/200/300 series is available in single (JMA-100), dual (JMA-200) and triple (JMA-300) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS...

0-5V output version. The JMA-100/200/300 series contains MEMS technology and is available in single (JMA-100), dual (JMA-200) or tri-axis (JMA-300) configurations. Standard measuring ranges span from the precision of ±0.5 g to a broad ±10 g with a...

The NEW Ruby MEMS accelerometers represent the next generation of high-performance inertial sensors from Jewell...

The NEW Ruby MEMS inclinometers represent the next generation of high-performance inertial sensors from Jewell...

The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. ±5V output...

The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. 4-20mA output...

The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. 0-5V...

K-OP measurement chain is a configurable array of optical FBG (Fiber Bragg Grating) sensors for high- strain...

K-OP-A measurement chain is a configurable array of optical FBG (Fiber Bragg Grating) sensors that withstand extremely harsh operating...

The K148 calibration unit simulates strain-gauge full bridges for amplifiers with one up to eight channels. The K148 comes with five measuring ranges with ten steps each. It enables DC and carrier frequency amplifiers from 225 Hz up to 4.8 kHz with...

The K3607 calibration unit can be used to calibrate measuring amplifiers or measurement chains without imposing a mechanical quantity on the strain gauge transducers belonging to the measurement...

The K800 calibration unit for strain gauge quarter bridges launched by HBM can calibrate eight channels simultaneously. The device is particularly useful for multi-channel measuring amplifiers, such as HBM’s MGCplus, that must be calibrated...

...

The KFU series of strain gauges are the ideal choice for structural tests at exceptionally high temperature conditions rising up to 350 °C. Typical applications include strain measurements on autoclaves or steam...

The KMA36 is a magnetic universal encoder for precise rotational or linear measurement. This system-on-chip combines a magneto resistive element along with analog to digital converter and signal processing in a standard small package. By using the...

The KMR force washer is suitable for static or dynamic compressive forces. The sensor is manufactured from stainless steel and sealed to IP67 rating for outdoor use. The sensor dimensions are per DIN125. Typical applications include production...

The KMT32B is a magnetic field sensor based on the anisotropic magneto resistance effect, i.e. it is sensing the magnetic field direction independently on the magnetic field strength for applied field strengths H>25 kA/m. The sensor contains two...

The KMT36H is a magnetic field sensor utilizing the anisotropic magnetoresistance effect. Therefore the sensor is sensing the magnetic field direction rather than the magnetic field strength. The sensor contains three Wheatstone bridges rotated by...

Due to its featured properties - high sensitivity and almost no hysteresis – the KMY sensors are used in a wide range of applications, like magnetic field measurement, revolution counters, proximity detecting, and position measurement. An uniaxial...

Due to its featured properties - high sensitivity and almost no hysteresis – the KMZ sensors are used in a wide range of applications, like magnetic field measurement, revolution counters, proximity detecting, and position measurement. A uniaxial...

Due to its featured properties - high sensitivity and almost no hysteresis – the KMZ10CM sensor is used in a wide range of applications, like magnetic field measurement, revolution counters, proximity detecting, and position...

The MEAS KPSI 27 is a ± 0.25% FSO static accuracy, 1.0" diameter non-submersible pressure transducer specifically designed for demanding industrial applications where the primary criteria are reliability and economy. These units provide repeatable,...

The MEAS KPSI 28 is a ± 0.50% FSO static accuracy, 1.0" diameter non-submersible pressure transducer specifically designed for demanding industrial applications where the primary criteria are reliability and economy. These units provide repeatable,...

The MEAS KPSI 30 is a ± 0.10% FSO static accuracy, 1.0" diameter non-submersible pressure transducer specifically designed for demanding industrial applications where the primary criteria are reliability and economy. These units provide repeatable,...

The MEAS KPSI 300DS, ± 0.50% FSO static accuracy, 0.75" diameter submersible hydrostatic level transducer is specifically designed for small bore applications and to meet the rigorous environments encountered in deep water level measurements. These...

The MEAS KPSI 320 is a ± 0.25% FSO static accuracy, 0.75" diameter submersible hydrostatic level transducer specifically designed for small bore applications and to meet the rigorous environments encountered in ground water level measurements....

The MEAS KPSI 330 is a ± 0.10% FSO static accuracy, 0.75" diameter submersible hydrostatic level transducer specifically designed for small bore applications and to meet the rigorous environments encountered in ground water level measurements....

The MEAS KPSI 335 is a ± 0.05% FSO static accuracy, 0.75" diameter submersible hydrostatic level transducer specifically designed for small bore applications and to meet the rigorous environments encountered in ground water level measurements....

The MEAS KPSI 342 is a ± 0.25% FS TEB accuracy, 0.75" diameter submersible hydrostatic level transducer that combines sensor competencies with the latest in Application Specific Integrated Circuit (ASIC) technology. Implementation of the ASIC...

The 0.75" diameter MEAS KPSI 351 submersible hydrostatic level transducer with ± 0.01 ft H2O accuracy is specifically designed for small bore applications and to meet the rigorous environments encountered in ground water level measurements....

The 0.75" diameter MEAS KPSI 353 submersible hydrostatic level transducer with ± 0.10% FS TEB accuracy is specifically designed for small bore applications and to meet the rigorous environments encountered in ground water level measurements....

The 0.75" diameter MEAS KPSI 355 submersible hydrostatic level transducer with ± 0.05% FS TEB accuracy specifically designed for small bore applications and to meet the rigorous environments encountered in ground water level measurements....

The MEAS KPSI 380 submersible temperature sensor represents the leading edge of temperature sensing technology available today. Incorporating a highly stable media-isolated sensor, the MEAS KPSI™ 380 features a SDI-12 serial-digital interface....

The 1.0" diameter MEAS KPSI 500 submersible hydrostatic level transducer with ± 0.05% FS TEB accuracy represents the leading edge of level sensing technology available today. Incorporating a highly stable media-isolated sensor, the MEAS KPSI 500...

The 1.0" diameter MEAS KPSI 501 submersible hydrostatic level transducer with ± 0.01 ft H2O accuracy represents the leading edge of level sensing technology available today. Incorporating a highly stable media-isolated sensor, the MEAS KPSI 501...

The MEAS KPSI 700 is a ± 1.00% FSO static accuracy, 1.0" diameter submersible hydrostatic level transducer specifically designed to meet the rigorous environments encountered in liquid level measurement and control. It can be configured to perform...

The MEAS KPSI 705 is a ± 0.25% FSO static accuracy submersible hydrostatic level transducer with an elastomeric diaphragm specifically designed to meet the adverse environments encountered in wastewater applications. This suitably-sized transducer...

The MEAS KPSI 710 is a ± 0.50% FSO static accuracy, 1.0" diameter submersible hydrostatic level transducer specifically designed to meet the rigorous environments encountered in liquid level measurement and control. It can be configured to perform...

The MEAS KPSI 720 is a ± 0.25% DSO static accuracy, 1.0" diameter submersible hydrostatic level transducer specifically designed to meet the rigorous environments encountered in liquid level measurement and control. It can be configured to perform...

The MEAS KPSI 730 is a ± 0.10% FSO static accuracy, 1.0" diameter submersible hydrostatic level transducer specifically designed to meet the rigorous environments encountered in liquid level measurement and control. It can be configured to perform...

The MEAS KPSI 735 is a ± 0.05% FSO static accuracy, 1.0" diameter submersible hydrostatic level transducer specifically designed to meet the rigorous environments encountered in liquid level measurement and control. It can be configured to perform...

The MEAS KPSI 750 is a submersible hydrostatic level transducer with a 2.75" elastomeric diaphragm and protective cage specifically designed to meet the adverse environments encountered in wastewater applications. This suitably-sized transducer...

KY strain gauges (SGs) consist of 10 or 15 very small measuring grids that are placed on a common carrier at a constant spacing (equidistant apart) plus one compensation SG. SG chains are especially suitable for determining strain...

The LB11 is a cylindric strain gauge with lead wires, which has been designed to measure strain, force, and vibration in bolts, screws, and other axial construction...

The Linear Ball Bearing (LBB) Series of dimensional gaging probes is engineered for highly precise and repeatable measurements in quality control and metrology applications. LBB within the gaging probe minimize radial play and friction for...

Model LBM Compression Load Button is constructed from stainless steel and has a small size. This product is available capacities range from 25 lbf up to 50K...

Model LBMP is stainless steel overload protected compression load button. This product is available in capacities ranging from 0.01kN to 100kN (2.25 lbf to 22.5K...

Model LBMU Ultra Compression Load Cell has a nonlinearity specification of +/-0.15%FS. It is constructed from stainless steel and is available in capacities from 100 lbf to 1K lbf (0.45kN to...

Model LBS Miniature Compression Load Button is constructed from stainless steel and has a small size. This product is available capacities range from 5 lbf up to 1K lbf (22.2 N to 4.45...

The LBSU ConvexBT Load Button Load Cell is superior to any other load button. Constructed from heat treated stainless steal and environmentally sealed with integral temperature...

The LCA-100 accelerometer is a 0.5G to 5G-range sensing pivot and jewel device that meets the demands of many applications. Suspension technology and bandwidths of 60Hz to 250Hz make the LCA-100 popular for a variety of military, commercial and...

The Jewell LCF-100 Series Suspension Servo Fluid Damped Inclinometer is a ±1º to ±90º device designed for applications where high levels of shock and vibration are...

The JEWELL LCF-196 Series Inclinometer meets the needs of high accuracy applications where high levels of shock and vibration are present. The LCF employs a fluid damped torsion flexure suspension that attenuates input energy to provide...

The LCF-200 Accelerometer is a ±0.5G to ±5G device designed for applications where high levels of shock and vibration are present. LCF units are characterized by excellent turn on repeatability and very low...

The Jewell LCF 2000 Series dual axis inclinometer is a rugged, high accuracy version of the LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and...

The Jewell LCF-2330 Series Inclinometer is a dual axis version of the rugged, high accuracy LCF Series. The design of the LCF-2330 was optimized to provide the high accuracy and superior repeatability of Jewell’s rugged, fluid damped, flexure...

The LCF-2530 is a dual axis version of the rugged, high accuracy LCF Series. The design of the LCF-2530 was optimized to provide the high suspension, servo technology in a small and convenient package for applications requiring a a compact dual axis...

The Jewell LCF-300 Series flexure suspension servo fluid damped inclinometer is a ±1° to ±90° device designed for applications where high levels of shock and vibration are...

The Jewell LCF 3000 Series tri-axis inclinometer is a rugged, high accuracy version of the LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and...

The LCF-3500 Flexure Suspension Fluid Damped Tri-Axial Accelerometer is a ±0.5G to ±5G device designed for applications where high levels of shock and vibration are present. LCF units are characterized by excellent turn on repeatability and very...

The JEWELL LCI Series meets the needs of high accuracy inclinometer applications with low shock and vibration such as those found in laboratories. The LCI employs a torsion flexure suspension that offers superior repeatability and low hysteresis at...

The LCIT series is based on a patented linear position sensor design that features all of the benefits of current LVDT inductive technology, but at a significantly lower cost. The proprietary coil and electronics design of the LCIT has allowed...

Model LCT-1 Ultimate is a hand-held device that is specifically designed to fully troubleshoot strain-gage based load cells. It provides several tests that indicate bridge resistance and integrity, overload, and insulation resistance – which can...

The use of the strain gauge LD20 is recommended wherever an extremely high strain or compression can occur (>5 %). The LD20 has a maximum elongation of +/- 100,000 µm/m (+/-10 %) and is attached with 30 mm...

Measurement Specialties introduces the new LDM-1000 LVDT conditioning module, for Industrial applications requiring the DIN standard rail mount, form factor. The Measurement Specialties LDM LVDT / RVDT conditioner provides everything you will need...

A 2-channel vibration controller suited to the everyday demands of shock and vibration testing, providing the flexibility to perform random, swept sine, and shock testing on vibration test...

A vibration controller supporting 4 – 16 input channels. Combines convenience, performance, flexibility and safety, making it suitable for any lab. Capable of working with a wide variety of vibration test systems and test profiles, including...

A range of economical amplifiers with outputs from 50 – 1000 W used to drive permanent-magnet and small electrodynamic shakers with force ratings from 8.9 N (2 lbf) to 489 N (110 lbf) for vibration testing and other...

A permanent magnet, electrodynamic shaker for vibration screening of very small components and assemblies, and for modal and structural analyses and other types of bench-top testing. Peak sine force rating of 8.9 N (2...

A permanent magnet, electrodynamic shaker for fatigue and resonance testing, modal and structural analyses, and vibration screening of small components. Peak sine force ratings of 17.8 N (4 lbf) or up to 26.7 N (6 lbf), when forced-air...

A permanent magnet, electrodynamic shaker for vibration testing of small components and assemblies, as well as for laboratory experiments, modal studies and structural analysis. It can impart maximum forces up to 196 N (44...

A permanent magnet, electrodynamic shaker for vibration testing of electronics and small assemblies, modal and structural analyses, and fatigue and resonance tests. Maximum forces up to 311 N (70...

A permanent magnet electrodynamic shaker for vibration testing of small assemblies and electronics, fatigue and resonance tests, and modal and structural analyses. Capable of imparting forces up to 489 N (110...

An air-cooled electrodynamic shaker for vibration testing of payloads up to 25 kg (55 lb), such as small automobile and aircraft components, electronic subassemblies and computer equipment. It has a maximum force rating of 940 N (211...

An air-cooled electrodynamic shaker for vibration testing of payloads up to 50 kg (110 lb), such as aircraft instrumentation and other electronic and mechanical subassemblies. It has a peak sine force rating of 2.2 kN (495...

An air-cooled electrodynamic shaker for vibration testing of small- and medium-sized payloads up to 100 kg (220 lb), such as aircraft and automobile components, computer equipment, and other electronic and mechanical subassemblies. Maximum force...

An air-cooled electrodynamic shaker for vibration and shock testing of small- and medium-sized payloads, up to 100 kg (220 lb), including aviation instrumentation, satellite components, automobile parts, computer equipment, and electronic and...

The 'L' in LDT Series stands for 'laminated' sensor. Typically, a 0.005" (125µm) polyester layer is laminated to a 28 µm or 52µm piezo film element. When used in a 'bending' mode, laminated film elements develop much higher voltage output when...

The LDT1-028K is a multi-purpose, piezoelectric sensor for detecting physical phenomena such as vibration or impact. The piezo film element is laminate to a sheet of polyester (Mylar), and produces a useable electrical signal output when forces are...

The LE11 is an encapsulated strain gauge with an IP67 degree of protection (in compliance with the chemical resistance of the...

The LiM 4-20 is low cost LVDT transmitter module designed to provide good performance at a cost suitable for OEM applications. Connection to the LiM 4-20 may be done utilizing the screw terminal barrier strip or optional card edge connector. Dip...

JM Concept has developed a range of concentrators allowing data transfer according to the field bus used. These concentrators are capable of interfacing up to 24 slaves (ie 1 to 96 measurement channels) depending on the...

The LM Series incorporates stainless steel and plastic isolation suitable for level sensing in water, other liquid and gas. The LM series uses a patent pending low cost stainless steel sensor in a PVC plastic fitting. The modular design is adaptable...

Cox Precision LoFlo Meters are designed to provide exceptional repeatability and speed of response when measuring very low flow rates. The LoFlo meter features a cantilever axial helical rotor design and robust ceramic ball bearings. The meter...

Our Model 807 control valve has a market leader because of its reliability, flexibility and durability. If your application requires critical control of liquid or gas flow, the RCV 807/752 is a trusted, high performance solution. This model is...

Model LP Stainless Steel Load Pin is great for lifting applications where short or long distances are involved. This product can be amplified with 5VDC, 10VDC or 4-20mA...

LRB-1000 Speed Switches are complete systems with one individually adjustable set point for monitoring a single rotating...

LRB-2000 Speed Switches are complete systems with two individually adjustable set points for monitoring a single rotating...

The LS31HT strain gauge is best suited for applications with elevated temperatures on weldable components, such as mechanical load analysis on buildings and...

The Jewell LSB Series Accelerometer is a general-purpose ±0.5G to ±20G device designed forindustrial, commercial and aerospace sensing...

The Jewell LSBC-R Series Accelerometer is a general purpose ±0.5G to ±20G device designed for rail, commercial, and aerospace sensing...

LSM  Accelerometers have 100,000 hour MTBF reliability and up to 20g full scale sensing range. It offers equivalent features to the LCA in a smaller package — approximately 1" cube. Its wide input range and bandwidth features meet the demanding...

The Jewell LSO Series fluid damped, flexure suspension, servo inclinometer is a precision internal grade sensing instruments and it is Jewell’s most robust solution designed to meet the needs of a variety of commercial, industrial, and aerospace...

The LSOX Series Inclinometer is a rugged, high performance, single-axis tilt sensor designed for peak performance in extreme conditions. The fluid damped mechanism delivers superior noise rejection in high shock and vibration environments as well as...

The JEWELL LSR Series Inclinometer meets the needs of applications with space constraints. The compact, cylindrical shape and the "stacking" feature of the LSR facilitate the use of several inclinometers when multi-axis measurement is required. The...

LT 5 & 7 Pressure Transducers are non-submersible hydrostatic pressure transducers specifically designed for demanding industrial applications where the primary criteria are reliability and...

The LTR Level Transducer is a ruggedized submersible hydrostatic level transducer specifically designed to meet the rigorous environments encountered in wastewater and liquid level measurements and...