Products

CFTplus Force Sensor: Connectors in Compliance with Market Standards, Pre-Stressed and Calibrated

The CFTplus series piezoelectric force transducers are calibrated for three measuring ranges and thus can be used immediately upon installation. There is no need for performing a calibration procedure. The sensitivity is specified in three measuring ranges (1 %, 10%, and 100 %) to guarantee a wide measuring range.

The extremely wide measuring range is typical for the piezoelectric measuring principle. Minimal forces can be reliably measured even under a high initial load.

The CFTplus series force sensors have a minimal displacement, which is why the fundamental frequency is immensely high. Therefore, they are particularly suitable for measuring fast processes, such as press-fit processes.

The EMC-tested force measuring elements are manufactured from rust resistant materials.

• HBM accuracy class: 0.5
• Capacities: 25, 50, 70 and 120 kN

Improved accuracy and calibration in three measuring ranges

Precise and dynamic

• Three calibration points: 1 %, 10 %, and 100 % of the capacity
• High-quality results owing to the low-drift design
• Ideal for use in dynamic applications due to their high stiffness and fundamental frequency

Extremely wide measuring range and excellent dynamics

Robust design

• The CFTplus are made exclusively from stainless materials
• IP65 degree of protection
• Immunity to electromagnetic interference
• Connection dimensions and connectors comply with market standards

Designed for industrial applications

Easy integration

• Mounting accessories, such as threaded bushings and centering rings, are included in the scope of supply
• Simple installation thanks to flange connections on both sides
• Delivery as pre-stressed and calibrated sensors (no calibration required)
• Available with four different capacities (25 kN, 50 kN, 70 kN, and 120 kN)
• Practical accessories, as well as CMD and CMA charge amplifiers, are available

Fast start-up