Products

Type 4374 is a piezoelectric, Planar Shear accelerometer. The integrated side cable terminates with a 10 – 32 UNF connector. Type 4374 is mounted on the object adhesively.

USE SCENARIOS

• High-level, high-frequency measurements
• Measurements in confined spaces
• Measurements on delicate structures
• Vibration testing and analysis

CHARACTERISTICS

This piezoelectric accelerometer may be treated as a charge source. Its sensitivity is expressed in terms of charge per unit acceleration (pC/g).

In the Planar Shear design, the piezoelectric element undergoes shear deformation as in the DeltaShear^® design. Two rectangular slices of piezoelectric material are arranged on each side of a rectangular centre post. Two masses are held in position using a high tensile strength clamping ring. The ring prestresses the piezoelectric elements to give a high degree of linearity. The charge is collected between the housing and the clamping ring. The piezoelectric element used in Type 4374 and Type 4734-S is PZ 27. Type 4734-L is PZ 23. The housing material is titanium.

CALIBRATION

The sensitivity given in the calibration chart has been measured at 159.2 Hz and an acceleration of 10 g. For 99.9% confidence level, the accuracy of the factory calibration is ± 2%.

Frequency range: 1 – 26000 Hz

Temperature: -74 – 250 C

Weight: 0.75 gram

Sensitivity: 0.15 pC/ms^-2

Residual Noise Level in Spec Freq Range (rms):  ±1.85 mg

Maximum Operational Level (peak): 5000 g

Electrical connector: 10-32 UNF

Mounting: Adhesive

Accessory Included: Integral AO 0038

Clip/Stud/Screw included: None

Output: Charge-PE

Unigain: No

Triaxial: No

TEDS: No

Applications: Miniature

Unit: pC

Resonance frequency: 85 kHz

Maximum Shock Level (± peak)L: 25000 g