HBM

Offers fiber optic isolation for high...

The 7600 Isolated Digitizer is based on the fourth generation of fiber-optic isolated digitizers designed by...

ABM75 aluminum foil with kneadable putty is an easy-to-use strain gauge covering material. The product consists of a 0.05 mm thick aluminum foil coated with 3 mm thick kneadable putty. ABM75 is simply pressed by hand onto the measuring...

Accessories for optical measurement...

AK22 is a tough, kneadable putty that adheres to virtually any material. The putty is kneaded by hand onto the measuring point. It is recommended to use AK22 covering putty along with ABM75 aluminum foil, or even with a third layer of SG250 silicone...

BCY01 is an activator for the Z70 cyanacrylate adhesive. The curing of Z70 depends on the chemical state of the parts to be joined. There are conditions where curing may take place slowly or even remain incomplete; such as dry air (relative humidity...

For timing and sequence control of switchgear or ballistics...

The Isolation Amplifier BE560 is a complete stand-alone isolated amplifier of modular construction for professional low and medium voltage measurement...

The BN100A bridge calibration unit is a highly precise calibrator to calibrate measuring equipment and measurement chains which function with a carrier frequency of...

The C Series strain gauges are the ideal choice for structural tests at exceptional temperature conditions. They have an enormous temperature range and measure precisely even at very low temperatures down to -269 °...

The C2 load cell is the industry standard when it comes to compressive force measurement: reliable, robust and durable. The C2 is manufactured from stainless steel and provides IP67 / IP68 sealing solutions. Loading is applied to the integral...

It fits into any space: The C9C miniature force sensor is ideal for measuring compressive force where space is a constraint and, at the same time, it is very...

Our range of cables, stranded wires, and wires can provide you with the right accessories for the wiring of strain gauges; for instance, they can be utilized in the internal wiring of strain gauge bridges or for connecting through strain gauges to...

The distributed amplifier system for structural testing and experimental stress analysis! The CANHEAD amplifier system can be installed directly at the measuring points. Thus, it reduces wiring expenditure, while at the same time offering an...

CANHEADdirect: Small investment, high...

catman data acquisition software (DAQ) allows for data visualization, analysis and storage even during the...

The Leading Data Acquisition Software for Tests with Huge Channel...

With an accuracy class of 0.01 and an integrated calibration certificate, the interference-proof signal conditioner ClipX is setting new standards in industrial process...

Summing box for parallel connection of up to four piezoelectric sensors to one charge amplifier...

The strain gauge based DD1 displacement transducer measures displacements of ±2.5 mm very accurately. The DD1 can also be used as a strain transducer due to its accessories. Moreover, the sensor has become the standard in materials...

nCode is the leading developer of fatigue analysis software in the World. DesignLife provides fatigue life prediction from finite element results to answer the question "how long will it last?" or "will it pass the test?" before you even have...

Whether it is force, pressure, torque, or load — the digiCLIP modular signal conditioning system acquires signals in production and process monitoring quickly and...

DMP41 is the most precise amplifier in the world for strain gauge-based measurements. The DMP series has been continuously developed by HBM for more than 30 years. It offers outstanding long-term stability and ultra-modern, user friendly functions,...

DY strain gauges have two measuring grids arranged parallel to each other. Typical applications for these strain gauges (SGs) include measurements on bending...

catman®AP - EasyOptics - Professional data acquisition software using optical strain...

The SoMat eDAQ Bridge Layer (EBRG) offers 16 simultaneously sampled low level differential analog inputs through independent connectors. An extremely versatile layer; the Bridge Board works with both amplified and unamplified transducers including:...

The SoMat eDAQ Vehicle Network Communications Layer (ECOM) offers (3) CAN device interfaces, (1) Vehicle Bus Module (VBM) interface and a GPS communications port. It is an extremely versatile layer providing a direct correlation between vehicle bus...

The ECPU-PLUS is the processor for the eDAQ stand-alone mobile data acquisition system. Onboard memory stores the data until test is completed which is downloadable to a PC for analysis. Tests may include minutes of data, or even days of data while...

Whether you’re a new customer looking for the ultimate in rugged data acquisition, or an existing eDAQ customer looking to upgrade your current system, the eDAQXR is the right solution for your harsh environment testing. It is the perfect tool...

The SoMat eDAQ sets the standard for rugged, mobile data acquisition; a stand-alone sealed system designed for testing in the harshest of...

The eDAQlite is the go anywhere, test anything compact version of the SoMat...

The SoMat eDAQ Digital Input/Output Layer (EDIO) is an extremely versatile layer that can measure digital inputs/outputs, pulse counters, quadrature decoders, vehicle bus, as well as GPS. The EDIO offers twenty four channels that can be used as...

HBM Power Analyzers are advanced systems for testing inverters and electrical machines. Users in electrification testing benefit from significant advantages over the use of a conventional power...

The eDrive Power Meter and Power Analyzer packages are tailored for power measurement at inverters and inverter driven machines. Thus, they utilize high sample rates and both electrical as well as mechanical power calculation...

The SoMat Precision GPS (EGPS-200) is a GPS receiver designed for non-contact speed measurements in professional vehicle testing applications such as braking, acceleration and general vehicle...

The SoMat eDAQ Simultaneous High Level Layer (EHLS) offers 16 simultaneously sampled high-level differential analog inputs through independent connectors. Up to four EHLS layers can be added to a single eDAQ system enabling up to 64-channels....

The SoMat eDAQ Isolated Thermocouple Layer (EITB) measures temperatures on 8-channels of isolated thermocouple signal conditioning. Thermocouples come in several styles of dissimilar metals, or calibrations; and the EITB is available in the four...

The Somat eDAQlite Bridge Layer (ELBRG) offers four simultaneously sampled low-level differential analog inputs through independent connectors. An extremely versatile layer; the Bridge Board works with both amplified and unamplified transducers,...

The Somat ELCOM Vehicle Network Communications Layer (1-ELCOM-2) offers three dedicated CAN device interfaces, a vehicle bus module (VBM) interface and a GPS communications port designed to work with Somat GPS...

The SoMat eDAQ-lite Base Processor (ELCPU) is the foundation eDAQ-lite systems are built...

The SoMat eDAQ-lite Digital Input/Output Layer (ELDIO) is an extremely versatile layer that can measure digital inputs/outputs, pulse counters, quadrature decoders, vehicle bus, as well as GPS. The ELDIO offers eight channels that can be used as...

The SoMat eDAQ-lite Simultaneous High Level Layer (ELHLS) offers 4 simultaneously sampled high-level differential analog inputs through independent connectors. Up to eight ELHLS layers can be added to a single eDAQ-lite system enabling up to 32...

The SoMat eDAQ-lite Non-Isolated Thermocouple Layer (ELNTB) measures temperatures on 16-channels of non-isolated thermocouple signal conditioning. Thermocouples come in several styles of dissimilar metals, or calibrations; and the ELNTB is...

The SoMat eDAQ Non-Isolated Thermocouple Layer (ENTB) measures temperatures on 32-channels of non-isolated thermocouple signal conditioning. Thermocouples come in several styles of dissimilar metals, or calibrations; and the ELNTB is compatible with...

EP150 is an easy-to-handle, hot-curing adhesive that is used in the process of strain gauge installation. In addition to being applied by a brush (included in the screw cap), EP150 can also be sprayed on. It is suitable for high ambient temperatures...

EP310N epoxy resin adhesive consists of two components and cures under heat and pressure. It is suitable for strain gauge installation for experimental tests usage, with extended temperature requirements and for transducer...

Main processor layer for eDAQXR-lite...

Adapters and patch...

The FS02 - BraggMETER tunable optical filter features a proprietary cavity design without guiding optics resulting in a compact, robust and vibration-resistant...

FS22 – Industrial BraggMETER DI - Dynamic (up to 1000...

FS22 – Industrial BraggMETER DI - Static (1...

The FS42 - Portable BraggMETER is an interrogator with embedded...

The FS62 - Athermal Strain Sensor is a Fiber Bragg Grating (FBG) based sensor with an innovative proprietary design that ensures athermal operation of the strain gauge by cancelling the intrinsic fiber optic thermal...

The FS62 - Strain Sensors are Fiber Bragg Grating (FBG) based sensors, designed to be bonded to surfaces and materials, spot welded to structures and components, attached or directly cast into concrete wet...

Heat-resistant | Completely non-metallic | Highly dielectric | Extended temperature...

FS63 Optical Temperature Sensors are suited for temperature measurements in large structures, such as Structural Health Monitoring(SHM) in civil structures and thermal mapping in electrical...

FS64 Optical Tilt Sensor is designed to measure small angle variations towards the...

FS65 Optical Accelerometer is designed to be used in a large range of monitoring applications, where low frequency and small amplitude vibrations are...

G Series - Optimum strain gauge for the manufacture of transducers, for smaller...

The Torque/RPM adapter enables the connection of HBM’s T12, T40B or similar torque transducers to GEN DAQ mainframes. The use of differential signals improves the immunity to external disturbance especially when using long cables in electrically...

The isolated Digital Event Adapter provides...

GEN16t is a robust rack mount...

Rack mountable, 17 slots, with data streaming up to 100...

Perfect for portable use, with low channel counts or applications that require a distributed...

A powerful and fast portable transient data...

A powerful high speed DAQ designed for installation in control...

The GEN4tB is a universal transient recorder & data acquisition mainframe with 4 slots for input boards and high data throughput. Perfect for high speed acquisition with moderate channel count in the field, in the lab, and in the test...

Genesis HighSpeed mainframes are the indispensable basis for our versatile and extremely powerful data acquisition systems and provide all the features expected from a transient...

Rack mountable, 7 slots, with a data transfer rate of 400...

Genesis HighSpeed is the modular platform for fast measurements of electrical and mechanical parameters. A transient recorder, data recorder and data acquisition system – all in...

The power analyzer card offers three power channels, each one consisting of one voltage input and one current (or voltage) input. It is specially designed for efficiency measurements in inverter-driven electric drive systems and all tests in...

16-channel universal input with sample rate of 500...

The power analyzer card offers three power channels, each one consisting of one voltage input and one current (or voltage) input. It is specially designed for efficiency measurements in inverter-driven electric drive systems and all tests in...

32-channel accel input...

32-channel accel input...

6-channel isolated balanced differential inputs up to...

Isolated balanced differential inputs up to...

High speed DAQ cards 25 MS/s or 100 MS/s or 250...

The GEN DAQ Basic/IEPE ISO 2 MS/s...

GEN DAQ Basic/IEPE ISO 200 kS/s Input Card is a general purpose signal...

8-channel universal input with sample rate of 500...

HBM amplifiers ready for...

AED Basic Devices - The AED Basic Devices: The Right Connection for the AD103C...

C16 / M - Tank weighing module for 20 t ... 200...

The High Voltage impulse attenuator together with the ISOBE5600 transient recorder and the Perception High Voltage Impulse Analysis option (HV-IA) form an application specific measurement solution. Together the three components offer a cost...

InField is a versatile field analysis software program optimized for use with SoMat...

Measurement system with integrated optical...

Transmission system with integrated fiber-optic...

K-OP measurement chain is a configurable array of optical FBG (Fiber Bragg Grating) sensors for high- strain...

K-OP-A measurement chain is a configurable array of optical FBG (Fiber Bragg Grating) sensors that withstand extremely harsh operating...

The K148 calibration unit simulates strain-gauge full bridges for amplifiers with one up to eight channels. The K148 comes with five measuring ranges with ten steps each. It enables DC and carrier frequency amplifiers from 225 Hz up to 4.8 kHz with...

The K3607 calibration unit can be used to calibrate measuring amplifiers or measurement chains without imposing a mechanical quantity on the strain gauge transducers belonging to the measurement...

The K800 calibration unit for strain gauge quarter bridges launched by HBM can calibrate eight channels simultaneously. The device is particularly useful for multi-channel measuring amplifiers, such as HBM’s MGCplus, that must be calibrated...

The KFU series of strain gauges are the ideal choice for structural tests at exceptionally high temperature conditions rising up to 350 °C. Typical applications include strain measurements on autoclaves or steam...

The KMR force washer is suitable for static or dynamic compressive forces. The sensor is manufactured from stainless steel and sealed to IP67 rating for outdoor use. The sensor dimensions are per DIN125. Typical applications include production...

KY strain gauges (SGs) consist of 10 or 15 very small measuring grids that are placed on a common carrier at a constant spacing (equidistant apart) plus one compensation SG. SG chains are especially suitable for determining strain...

The LB11 is a cylindric strain gauge with lead wires, which has been designed to measure strain, force, and vibration in bolts, screws, and other axial construction...

The use of the strain gauge LD20 is recommended wherever an extremely high strain or compression can occur (>5 %). The LD20 has a maximum elongation of +/- 100,000 µm/m (+/-10 %) and is attached with 30 mm...

The LE11 is an encapsulated strain gauge with an IP67 degree of protection (in compliance with the chemical resistance of the...