Jewell

Jewell Instruments AKA Series Accelerometers are an excellent choice for cost to performance trade-off. The AKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.  LC version...

Jewell Instruments AKA Series Accelerometers are an excellent choice for cost to performance trade-off. The AKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.  SC version...

Jewell Instruments AMA Series Accelerometers are an excellent choice for cost to performance trade off. The AMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.  Analog...

The Jewell Instruments model AMH is a high precision MEMS inclinometer. Standard units are available with 0-5V, 0.5-4.5V, or 4-20mA output options. All AMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output...

The model AMI is a high precision MEMS inclinometer with built-in thermal compensation. Standard units come with 0-5V, 0.5-4.5V or 4-20mA output options. All AMI series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and...

The Jewell Instruments model AML is a low cost analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up to 1m. Custom...

The Jewell Instruments model AMS is a mid-level performance analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up...

The JEWELL ASB Series Angular Accelerometer is a general purpose devise made for industrial, commercial, and aerospace sensing requirements. Its many applications include antennae stabilization, torque measurement, flight control systems, automotive...

The ASM Angular Accelerometer is configured specifically to yield a combination of miniaturization, high accuracy, and ruggedness. The ASM Series has been designed to minimize thermal errors associated with outdoor applications. The Jewell ASM...

The ASXC Sis a force balanced servo accelerometer that uses a fluid-filled ring chamber to measure angular acceleration. It is currently used in a wide variety of applications including many military and aviation flight controls including autopilot...

Jewell Instruments DMA Series Accelerometers are an excellent choice for cost to performance trade off. The DMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability. RS232 / RS485...

The Jewell Instruments model DMH is a high precision MEMS inclinometer. Units are available with RS232, RS422, RS485 and UART TTL options. All DMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are...

The Jewell Instruments DSI-1000 Series Digital Display is a microprocessor based panel meter designed to take the output from Jewell's gravity referenced inclinometers and display it at an angle. The compact unit provides the ±15VDC sensor...

The DXA-100/200 single or dual digital accelerometer takes Jewell’s highly accurate analog closed loop sensor technology to the next level. Ranges from ±0.25g up to ±2g...

Meets CENELEC/AREMA Standards.  The DXA-100/200-R single or dual digital accelerometer takes Jewell’s highly accurate analog closed loop sensor technology to the next...

The Jewell DXI-100/200 Series single or dual digital inclinometer takes Jewell’s highly accurate analog closed loop sensor technology to the next level with RS232 and RS485...

The ECC-2D Series is a low-cost 2D digital compass in a small package with low power consumption and high reliability designed for commercial and industrial...

If your compass application involves vibration, acceleration, uneven terrain, or rough seas, the ECG Series, a gyro-stabilized electronic compass, is an uncompromising solution that will outperform rival units that cost...

The ECL low-power digital compass is designed specifically for commercial, industrial, and military users. The ECL series will be of particular interest to ROV and AUV manufacturers who are concerned with power usage and accurate heading in all...

The ECS digital compass represents the state-of-the-art in magnetic compassing. It combines a precision 3-axis solid-state magnetometer and a rugged 2-axis electrolytic tilt sensor to provide accurate heading and tilt measurements over a wide range...

The ECV eCompass Series is a 3D electronic compass providing stable azimuth, pitch, and roll measurements in dynamic conditions. As an enhanced version of our ECG Series, the ECV includes a full suite of precision, 3-axis, MEMS sensors, and an...

The eDXI-100/200 inclinometer series is a precision single or dual axis tilt sensor that includes Ethernet...

The JDI-100/200 series is a digitally temperature compensated inclinometer available in single and dual axis...

The Jewell Instruments JMA-165 MEMS accelerometers are a cost effective and viable alternative to traditional force balance designs. This mighty little sensor is CENELEC, AREMA certified, and RoHS...

The Jewell Instruments JMA-165 MEMS accelerometers are a cost effective and viable alternative to traditional force balance designs. This mighty little sensor is CENELEC, AREMA certified, and RoHS compliant. Integrated HEATER...

±5V output version.  The JMA-100/200/300 series is available in single (JMA-100), dual (JMA-200) and triple (JMA-300) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS...

4-20mA output version. The JMA-100/200/300 series is available in single (JMA-100), dual (JMA-200) and triple (JMA-300) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS...

0-5V output version. The JMA-100/200/300 series contains MEMS technology and is available in single (JMA-100), dual (JMA-200) or tri-axis (JMA-300) configurations. Standard measuring ranges span from the precision of ±0.5 g to a broad ±10 g with a...

The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. ±5V output...

The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. 4-20mA output...

The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. 0-5V...

The LCA-100 accelerometer is a 0.5G to 5G-range sensing pivot and jewel device that meets the demands of many applications. Suspension technology and bandwidths of 60Hz to 250Hz make the LCA-100 popular for a variety of military, commercial and...

The Jewell LCF-100 Series Suspension Servo Fluid Damped Inclinometer is a ±1º to ±90º device designed for applications where high levels of shock and vibration are...

The JEWELL LCF-196 Series Inclinometer meets the needs of high accuracy applications where high levels of shock and vibration are present. The LCF employs a fluid damped torsion flexure suspension that attenuates input energy to provide...

The LCF-200 Accelerometer is a ±0.5G to ±5G device designed for applications where high levels of shock and vibration are present. LCF units are characterized by excellent turn on repeatability and very low...

The Jewell LCF 2000 Series dual axis inclinometer is a rugged, high accuracy version of the LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and...

The Jewell LCF-2330 Series Inclinometer is a dual axis version of the rugged, high accuracy LCF Series. The design of the LCF-2330 was optimized to provide the high accuracy and superior repeatability of Jewell’s rugged, fluid damped, flexure...

The LCF-2530 is a dual axis version of the rugged, high accuracy LCF Series. The design of the LCF-2530 was optimized to provide the high suspension, servo technology in a small and convenient package for applications requiring a a compact dual axis...

The Jewell LCF-300 Series flexure suspension servo fluid damped inclinometer is a ±1° to ±90° device designed for applications where high levels of shock and vibration are...

The Jewell LCF 3000 Series tri-axis inclinometer is a rugged, high accuracy version of the LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and...

The LCF-3500 Flexure Suspension Fluid Damped Tri-Axial Accelerometer is a ±0.5G to ±5G device designed for applications where high levels of shock and vibration are present. LCF units are characterized by excellent turn on repeatability and very...

The JEWELL LCI Series meets the needs of high accuracy inclinometer applications with low shock and vibration such as those found in laboratories. The LCI employs a torsion flexure suspension that offers superior repeatability and low hysteresis at...

The Jewell LSB Series Accelerometer is a general-purpose ±0.5G to ±20G device designed forindustrial, commercial and aerospace sensing...

The Jewell LSBC-R Series Accelerometer is a general purpose ±0.5G to ±20G device designed for rail, commercial, and aerospace sensing...

LSM  Accelerometers have 100,000 hour MTBF reliability and up to 20g full scale sensing range. It offers equivalent features to the LCA in a smaller package — approximately 1" cube. Its wide input range and bandwidth features meet the demanding...

The Jewell LSO Series fluid damped, flexure suspension, servo inclinometer is a precision internal grade sensing instruments and it is Jewell’s most robust solution designed to meet the needs of a variety of commercial, industrial, and aerospace...

The LSOX Series Inclinometer is a rugged, high performance, single-axis tilt sensor designed for peak performance in extreme conditions. The fluid damped mechanism delivers superior noise rejection in high shock and vibration environments as well as...

The JEWELL LSR Series Inclinometer meets the needs of applications with space constraints. The compact, cylindrical shape and the "stacking" feature of the LSR facilitate the use of several inclinometers when multi-axis measurement is required. The...

The Model 84053 Ceramic Sensor Assembly is available without the mounting bracket as our uniaxial Model 59577 Ceramic Sensor. Performance is the...

The model A711-2 (floor-mount), and A716-2 (wallmount) bolt or clamp to any surface, and are well suited for areas with heavy traffic or vibration. Electronic performance is identical to the model A701-2. Units include two switchable gains and two...

The model A711-2(4X) Weatherproof Floor-mount Tiltmeter offers the same performance as the model A701-2(4X), but in a floor-mount package. Units are rated IP65 waterproof for use in wet, humid, and corrosive environments. The A711-2(4X) bolts or...

The model C901 and C902 Tulip Uniaxial Clinometers deliver the same performance as our model A900-series, but with 4-20mA output. Units are available in horizontal (C901) or vertical (C902) mounting packages. The Tulip conveniently operates as a...

The dual-axis Model 900 is an inexpensive, gravity-referenced clinometer with analog voltage output and compact dimensions. Sold without a housing, its small size and performance make it an excellent choice for many OEM, test and measurement...

The Emerald Series accelerometer is a low cost, high precision sensor designed with higher accuracy than comparable MEMS devices. Input Ranges From ±0.25G to ±2G°. Applications include robotics, construction equipment, industrial measurement and...