zzz_Archive

The Model 1100 turbine flow meter is the ideal meter for liquid flow measurement both on and off the oilfield. This meter maintains measurement accuracy and mechanical integrity in the corrosive and abrasive fluids commonly found in oil field water...

The Cox 4010 and 4020 flow computers are designed for liquid applications with potential-varying process conditions. Panel mounted, these flow computers can simultaneously display linearized rate and total flow information. Flow can be monitored in...

Cox 4050 Multi-Input Linear flow computers monitor up to three independent flow sensors and provide automatic switching for manifold applications. Users can select mass or flow rate display via a unique, hand-held remote or front panel keypad. The...

The Blancett Series 900 flow meters are rugged, low-priced and specifically designed to measure floodwater line flow in secondary oil recovery operations. Using time-proven rotary vane and multi-jet impeller mechanisms, the Series 900 flow meters...

The Anglestar® Protractor System (APS) is a ready to use, stand alone system for angle measurements. The system incorporates a special AccuStar I ratiometric electronic clinometer, a digital display, and a standard four foot cable. This system will...

The Model PFB approved Fire Pump System features a round pitot tube. It is a primary flow sensor designed to produce a differential pressure that is proportional to the flow. It is a highly reliable averaging pitot tube which generates a pressure...

Blancett B1500 turbine flow meters have exceptional mechanical linearity, resulting in minimizing, or negating, temperature induced viscosity influence. Meters come with national pipe thread (NPT) or flange process fittings, sizes up to two inches...

The Blancett B1750 positive displacement flow meter provides high measurement accuracy for fluids over a wide viscosity range. Applications include lubricants, fuels, chemicals and solvents, oils and greases. With only 2 moving parts, the positive...

Originally developed for the secondary oil recovery market, the B20 turbine flow meter is ideal for liquid flow measurement, both on and off the oil field. The B20 meter is specifically designed for low flow capacity waterflood projects. Engineered...

The B2800 flow monitor is an advanced microprocessor-based monitor that is also low cost and simple to operate. When ordered with a Blancett turbine meter, the B2800 monitor is configured at the factory for units of rate and total, or the unit may...

Blancett® B2900 flow monitor offers advanced digital signal processing technology in an easy-to-access package. This flow monitor processes frequency output from a flow sensor and interprets the signal to calculate flow rate, total flow and batch...

The Blancett B3000 Series flow monitor provides a flexible, durable, easy-to-use platform for flow metering applications. This monitor makes it easy to track flow, with a crisp dot-matrix display capable of simultaneous display of flow rate and flow...

The Preso ELLIPSE® Model BAR (Annular Commercial) is a multiported, self averaging differential pressure type ELLIPSE® flow...

The Ellipse Model BHL annular hot tap, dual rod flow device is a multi-ported, self-averaging differential pressure flow element. Its innovative elliptical shape provides the lowest permanent pressure loss in the industry. The Ellipse flow meter is...

The Ellipse Model BHR annular wet tap flow device is a multi-ported, self-averaging differential pressure flow element. Its innovative elliptical shape provides the lowest permanent pressure loss in the industry. The Ellipse flow meter is designed...

The Model BIN is a highly reliable averaging pitot tube which generates a pressure differential between its upstream (stagnation) ports and its downstream (static) ports that is proportional to the flow rate squared. It is well suited for measuring...

The Preso COIN Chem flowmeter accommodates most flows, even the most abrasive. Accuracy and reliability are achieved by its rugged construction, practical design, and simple principle of operation. It stands alone in its ability to maintain the...

The Preso COIN FF flowmeter accommodates most flows, even the most abrasive. Accuracy and reliability are achieved by its rugged construction, practical design, and simple principle of operation. It stands alone in its ability to maintain the...

The Preso COIN NB flowmeter accommodates most flows, even the most abrasive. Accuracy and reliability are achieved by its rugged construction, practical design, and simple principle of operation. It stands alone in its ability to maintain the...

The Preso COIN NF flowmeter accommodates most flows, even the most abrasive. Accuracy and reliability are achieved by its rugged construction, practical design, and simple principle of operation. It stands alone in its ability to maintain the...

The Preso COIN NN flowmeter accommodates most flows, even the most abrasive. Accuracy and reliability are achieved by its rugged construction, practical design, and simple principle of operation. It stands alone in its ability to maintain the...

The Preso Model COIN® Model NW Wafer with NPT Pressure Taps segmented or segmental wedge design is a differential pressure type flow...

The CV Venturi flow meter is a differential pressure element designed to accurately measure the flow of liquids and gases by forcing the flow into a smaller diameter section of pipe, then measuring the pressure differences between the unrestricted...

The DFX ultrasonic Doppler flow meter measures flows of liquids containing suspended particles or aerated liquids. The suspended particles must reflect ultrasonic energy. The DFX flow meter operates by transmitting ultrasonic waves into the flow...

Cox Digital-to-Analog Converters accept frequency outputs from turbine flow meters and produce an analog signal output. These converters are designed for magnetic or radio frequency (RF) pickoffs in two different product...

The Dynasonics DXN meter is a powerful tool for troubleshooting flow issues, whether you want to quickly verify the flow reading of another meter or to data log flow system values over an extended time period. The DXN portable meter has transducers...

The Cox EC80 Flow Processor is a programmable electronic processor, providing total compensation to enhance flow meter accuracy, while extending the linear flow range. Packaging is provided for remote, direct or embedded mounting to support most...

The Ellipse Model AF annular flanged flow device is a multi-ported, self-averaging differential pressure flow element. Its innovative elliptical shape provides the lowest permanent pressure loss in the industry. The Ellipse flow meter is designed...

The Ellipse Model AHF annular flanged flow device is a hot tap flow meter designed to produce a differential pressure that is proportional to flow. Its innovative elliptical shape provides the lowest permanent pressure loss in the industry. The...

The Ellipse Model AHL annular flow device is a hot tap, high pressure flow meter designed to produce a differential pressure that is proportional to flow. Its innovative elliptical shape provides the lowest permanent pressure loss in the industry....

The Ellipse Model AHL annular flow device is a hot tap, high pressure flow meter designed to produce a differential pressure that is proportional to flow. Its innovative elliptical shape provides the lowest permanent pressure loss in the industry....

The Ellipse Model AHR annular wet tap, low pressure flow device is a multi-ported, self-averaging differential pressure flow element. Its innovative elliptical shape provides the lowest permanent pressure loss in the industry. The Ellipse flow meter...

The Ellipse Model AHS annular hot tap, steam flow device is a multi-ported, self-averaging differential pressure flow element. Its innovative elliptical shape provides the lowest permanent pressure loss in the industry. The Ellipse flow meter is...

The Ellipse Model AHZ annular flanged, hot tap steam flow device is a multi-ported, self-averaging differential pressure flow element. Its innovative elliptical shape provides the lowest permanent pressure loss in the industry. The Ellipse flow...

The Ellipse Model AR annular flow device is a multi-ported, self-averaging differential pressure flow element. Its innovative elliptical shape provides the lowest permanent pressure loss in the industry. The Ellipse flow meter is designed with a...

The Ellipse Model AS annular flow device is a steam flow meter designed to produce a differential pressure that is proportional to flow. Its innovative elliptical shape provides the lowest permanent pressure loss in the industry. The Ellipse flow...

The Ellipse Model ASF annular flanged, steam flow device is a multi-ported, self-averaging differential pressure flow element. Its innovative elliptical shape provides the lowest permanent pressure loss in the industry. The Ellipse flow meter is...

The Model PFA FM approved Fire Pump System features the Preso Ellipse. The Ellipse is a primary flow sensor designed to produce a differential pressure that is proportional to the flow. Its patented elliptical shape provides the lowest pressure loss...

Cox Exact Dual Rotor Turbine Flow Meters are the pinnacle of turbine meter technology that delivers results not attainable with single rotor designs. The Exact meter’s hydraulically coupled helical dual rotor design provides exceptional...

The Badger Meter® FC-5000 Flow Computer is a microprocessor-driven device designed for flow monitoring. The FC-5000 is designed to be compatible with the complete line of Badger Meter industrial flow meters, creating a solution to totalize and...

Cox FC30 flow computers service both liquid and gas applications. The FC30 features batching, 40-point flow meter linearization tables, and temperature viscosity correction using Strouhal/Roshko advanced linearization methods and multiple flow and...

The Blancett FloClean sanitary turbine flow meter provides the high accuracy and rigorous design of the standard Blancett turbine in a sanitary-style tri-clamp mounting configuration. Developed for use in a variety of food, beverage and...

The Blancett QuikSert® In-line turbine flow meter provides the high accuracy and rigorous design of the standard Blancett turbine, but in a wafer-style mounting configuration. With a unique "between-the-flange" design, the need for mating flanges...

Cox Precision Gas Flow Meters are designed for precise and repeatable flow measurement of all compressible fluids, with the added benefit of minimal pressure loss. To accommodate the requirements of most gaseous flow applications, Cox Precision Gas...

The Preso portable gage Model GM is a portable read-out meter designed to measure differential...

The Preso GMD Gage features a leak-proof round face plate with a 270° dial, balance valve and connections for instrument tubing. Each gage is furnished with a universal mounting attachment for flange or wall mounting as well as vertical or...

The IFC15 is the ultimate electronic processor, providing total compensation to enhance flowmeter accuracy, while extending the linear flow range. This compact design has dual rotor frequency inputs, temperature...

Cox Precision LoFlo Meters are designed to provide exceptional repeatability and speed of response when measuring very low flow rates. The LoFlo meter features a cantilever axial helical rotor design and robust ceramic ball bearings. The meter...

The 7500P Mag Meter is a successful combination of the most advanced electromagnetic flow metering technology with the simplicity and ruggedness of proven batching systems...

The M-Series 7500S Mag Meter, is a successful combination of the most advanced electromagnetic flow metering technology with the simplicity and ruggedness of proven batching systems for industrial applications requiring sanitary...

The Badger Meter M-Series® M1000 meter is the result of years of research and field use of electromagnetic flow meter...

The Badger Meter M-Series® M2000 is the result of years of research and field use of electromagnetic flow meter technology. Based...

The innovative design of the Badger Meter M-Series M3000 meter represents the next generation of electromagnetic flow...

The innovative design of the Badger Meter M-Series M4000 meter represents the next generation of electromagnetic flow...

Designed, developed and manufactured under strict quality standards, the M-Series M5000 electromagnetic meter features sophisticated, processor-based signal conversion with accuracies of ± 0.50%. Based on Faraday’s Law of Induction, these meters...

The Field Verification Device is a portable test device for the Badger Meter M-Series® electromagnetic flow meters. The M2000 and the M5000 meters can be tested using this...

The Preso MassCOIN is an integral mult-variable transmitter mount and temperature sensor flowmeter that accommodates even the most abrasive flows. Accuracy and reliability are achieved by its rugged construction, practical design, and simple...

Cox Precision Turbine Flow Meters have unprecedented mechanical linearity, resulting in minimizing, or negating, temperature...

The PT5 Series is part of our industrial line of cable-extension transducers. Excellent solution for high acceleration and high-cycle applications such as die-casting, injection molding or crash testing. Measurement ranges up to 250 inches....

The RCT1000 Coriolis mass flow meter identifies flow rate by directly measuring mass flow and density of fluids over a wide range of process temperatures with a high degree of accuracy. For homogenous fluids consisting of two components like sugar...

The RNG Series meter is an insertion-style vortex shedding flow meter designed for accurate measurements over an extremely large flow range. The meters have no moving parts and are virtually maintenance-free. The RNG Series is suitable for most gas...

The RVL series meter uses vortex-shedding technology has no moving parts, and any potential for fluid contamination is eliminated by the corrosion-resistant all-plastic construction. The meter includes a compact two-wire (4…20 mA) or three-wire...

The RWG and RWBG Series meters are wafer-style in-line flow meters designed for high accuracy measurements with extremely low pressure drop. The meters have no moving parts and are virtually maintenance-free after installation. The RWG series is...

Cox Series 220 Sonic Nozzles are mass flow instruments designed for the accurate measurement and control of gas flow. The internal design of the nozzle consists of a circular arc that leads to the minimum throat area. Tangent to the circular arc on...

The Model 1201 accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 50 g to 1000g and frequency...

The Model 1201F accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 50 g to 1000g and frequency...

The TE Connectivity model 13201A and 23201A accelerometers are rugged analog accelerometers capable of accurately measuring vibration inputs along each axis. The model 13201A sensor is a single axis accelerometer while the model 23201A is a dual...

The Model 3801A is a mV output piezoresistive accelerometer in a rugged hermetic package. The accelerometer incorporates mechanical stops for over-range protection up to 10,000g. The Model 3801A is offered in ranges from ±50 to ±2000g and is gas...

The Model 4000A is an economical signal conditioned MEMS DC accelerometer packaged in an anodized Aluminum housing. The accelerometer is available in ranges from ±2 to...

The Model 4020 & 4030 are low noise, signal conditioned DC accelerometers packaged in a durable molded housing. The accelerometers are offered in ±2g & ±6g ranges with a nominal 0-200Hz bandwidth. The model 4020 is a dual axis...

The Model 40A Accelerometer is a small piezoresistive accelerometer designed to be compliant with the latest SAE J211/J2570 (AUG2009) specifications. This unit features built-in mechanical stops, anodized aluminum alloy housing and flexible cable...

The Model 40B Accelerometer is a small piezoresistive accelerometer designed to be compliant with the latest SAE J211/J2570 (AUG2009) specifications. This unit features built-in mechanical stops, anodized aluminum alloy housing and flexible cable...

The Model 40B Accelerometer is a small piezoresistive accelerometer designed to be compliant with the latest SAE J211/J2570 (AUG2009) specifications. This unit features built-in mechanical stops, anodized aluminum alloy housing and flexible cable...

The Model 4203 is a triaxial motorsport accelerometer designed for harsh installations. The rugged, gas damped accelerometer is ideally tailored for motorsport applications and road vehicle testing. The model 4203 features an 8-pole low-pass filter...

The Model 4332M3 is 4-20mA output MEMS triaxial accelerometer offering both static and dynamic response. The accelerometer is packaged in a corrosion resistant stainless steel housing and is offered in ±2g to ±20g range. The model 4332M3 features...

The Model 4602 is designed for both static and dynamic measurements in critical and demanding applications. It is available in ranges from ±2 to ±200g and offers outstanding thermal performance. It is compensated from -55°C to +125°C. The...

The Model 4604 is a rugged, low-profile MEMS DC accelerometer with exceptional performance over a full operating temperature range of -55°C to +125°C. The accelerometers are available in ranges from ±2 to ±200g with a wide bandwidth from DC to...

The Model 4610 is an ultra-stable MEMS DC accelerometer with exceptional performance over a full operating temperature range of -55°C to +125°C. The accelerometers are available in ranges from ±2 to ±200g with a wide bandwidth from DC to...

The Model 4630 is an ultra-stable MEMS DC triaxial accelerometer with exceptional performance over a full operating temperature range of -55°C to +125°C. The accelerometers are available in ranges from ±2 to ±200g with a wide bandwidth from DC...

The Model 4801A is an ultra-stable MEMS accelerometer packaged in a rugged, hermetically sealed stainless steel housing. The accelerometer is available in ranges from ±2 to ±200g with a wide bandwidth from DC to...

The Model 4810A is an ultra-stable MEMS accelerometer packaged in a rugged, low-profile stainless steel housing.  The accelerometer is available in ranges from ±2 to ±200g with a wide bandwidth from DC to 2000Hz. The model 4810A accelerometers...

The Model 4835A is an ultra-stable MEMS DC triaxial accelerometer packaged in a rugged, welded Titanium housing.  The model 4835A accelerometers incorporate gas damped silicon variable capacitance MEMS sensing elements with integral over-range...

The Model 52 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit features a full bridge output configuration with an operating temperature range from -40 to...

The TE Connectivity model 52F Accelerometer has recently been upgraded to incorporate the most advanced piezoresistive MEMS sensor on the market. The accelerometer features the next generation of the reliable TE Connectivity piezoresistive chip with...

The Model 52M30 accelerometer has an advanced piezoresistive MEMS sensing element which offers excellent dynamic range and stability. This unit features a full bridge output with an operating temperature range from -40 to +90°C and measurement...

The Model 53 and 53A Triaxial Crash Test Accelerometers are some of the most popular sensor to be used in crush zone and side impact testing when a triaxial solution is preferred.  The accelerometers feature the next generation of the reliable TE...

The model 58 accelerometer is available in ranges from ±50g to ±6000g and features a full-bridge configuration with a nominal 4000Ω impedance that offers quick warm-up time and minimal drift, unlike lower impedance designs on the...

The Model 606M1 is a MEMS triaxial seat pad accelerometer with both static and dynamic responses designed specially for characterizing whole body vibration in accordance with ISO 2631-1 and ISO 8041. The DC response of the silicon MEMS sensors is...

The Model 606M2 is an IEPE triaxial seat pad accelerometer designed specially for characterizing whole body vibration in accordance with ISO 2631-1 and ISO 8041. The seat pad incorporates a removable triaxial IEPE accelerometer with 100mV/g output...

The TE Connectivity model 64B is an exceptional piezoresistive MEMS accelerometer designed for both crush zone and anthropomorphic dummy instrumentation. The accelerometer features a full bridge output configuration with ideal gas damping tailored...

The TE Connectivity model 64C crash test accelerometer is a remarkable MEMS piezoresistive sensor specifically designed for auto safety testing in both crush zone and anthropomorphic dummy applications. The model 64C ATD dummy test accelerometer is...

The TE Connectivity model 64X is the most advanced accelerometer ever released for anthropomorphic dummy instrumentation. The accelerometer features a full bridge output configuration with ideal gas damping tailored for outstanding shock...

The TE Connectivity model 68CM1 Triaxial Crash Test Accelerometer offers exceptional performance for ATD dummy instrumentation with best in class frequency response, linearity, transverse sensitivity and long-term drift. The model 68CM1...

The Model 8021-01 & 8022-01 are internally shielded rugged IEPE accelerometers designed for harsh environments. The accelerometers are available in ±10g, ±80g & ±500g dynamic ranges and have a flat bandwidth up to greater than 12kHz. The...

The Model 8032-01 is an internally shielded rugged IEPE accelerometer designed for harsh environments. The accelerometer is available in ±50 to ±500g dynamic ranges and has a flat bandwidth up to greater than12kHz. The model 8032-01 features an...

The Model 805M1 is a miniature adhesive mount voltage output accelerometer built on a 3-pin TO-5 header. It is available in ±20g and ±200g dynamic ranges and offers a flat frequency response to 12kHz. The accelerometer features a hermetic...

The Model 8711-01 are internally shielded rugged IEPE accelerometers designed for industrial condition monitoring. The accelerometers are available in ±5g to ±80g dynamic ranges and have a flat bandwidth up to greater than 10kHz. The model 8711-01...

The Model 8811-01 are internally shielded rugged IEPE accelerometers with custom lightning protection up to ±2.5kV designed for harsh industrial condition monitoring where accelerometers could be exposed to lightning. The accelerometers are...

The TE model 8911 wireless accelerometer combines a sensor, data collector, digital signal processor, and radio into one compact, battery-operated device that measures both vibration and temperature...