HBM

SL450 silicone resin provides optimal protection in applications that involve extremely high ambient temperatures. The covering material consists of transparent silicone resin, and it is applied to the measuring point with a brush integrated into...

Proven for decades, the SLB strain sensor is being used in applications that do not require or need to necessarily achieve extremely high accuracy levels, but instead where robust and cost-effective measuring equipment needs to be used. Its main...

The SLB700A/06VA is an active strain sensor fitted with smart electronics, which has been proven for many years in measurements concerning the force shunt. Standard output signals include 0 ... 10 V or 4 ... 20 mA. Its main application fields...

The SoMat Strain SMART Module (SMSTRB4-xxx) is a part of a family of signal conditioners for the eDAQ and eDAQ-lite HLS layers. The Strain SMART Module provides excellent strain gage signal conditioning with support for 1/4-, 1/2- and...

Installation of strain gauges is even faster with our soldering terminals and soldering...

The Somat E-AC/15 Power Supply (1-E-AC/15-2) is designed to provide 15 volts DC from a standard 120-volt AC input to a SoMat eDAQ or eDAQlite...

The EXRCPU is the processor for the stand-alone mobile data acquisition system, and is considered the workhorse for the eDAQXR platform. Data from various inputs are stored onboard and can be downloaded after the test is completed. Tests may include...

SomatXR CX22B-R – Ultra-Ruggedized Data Recorder for Interactive Vehicle...

The SomatXR CX27C-R Industrial Ethernet gateway enables the integration of SomatXR modules into a measurement chain, which can also be simultaneously acquired in real time. It is perfectly suitable for both simple and complex development test...

This Ethernet switch enables SomatXR and QuantumX modules to be connected to and synchronized with a PC or data...

Supports all electrical and active sensors | For sensors with current and voltage output incl. IEPE | 16 channels with automatic sensor...

Individual devices for type K and type T thermocouples | 16 channels with automatic sensor identification (RFID) | The specialists for temperature...

16 channels | For use with strain gauges & SG-based sensors (half & full bridge) | Ideal for experimental stress analysis, structural & load...

Amplifier for highly dynamic measurements | Supports virtually all common sensor technologies | 4 channels with automatic sensor...

Sample rates up to 100 kS/channel | Bandwidth of up to 40 kHz | Precise rotational speed & torque measurement in mobile vehicle...

4 CAN interfaces for synchronously acquiring vehicle data - Inputs for classic CAN - Measured signal transfer on...

4 CAN interfaces for synchronously acquiring vehicle data - Inputs for CAN-FD - Measured signal transfer on...

Up to five sensors per module to enable various pressure measurements (of gases and liquids) to be taken in...

8 universal channels with automatic sensor identification | Ideal with frequently changing measurement tasks | Identifies all measured quantities and sensor types | Highly future...

The rugged SomatXR data acquisition system facilitates use in harsh environments. Besides being extremely reliable, precise, and protected from humidity, dust, shock, and vibration. The modular system is well-suited to be used in a variety of...

HBM provides different cleaning agents for cleaning measuring points and measurement objects prior to strain gauge...

Our strain gauge installation kits include all the materials you need for your strain gauge applications—available in beginner and professional...

HBM offers strain gauges available with various creep compensation values specifically designed for transducer manufacturing. We have an archive of hundreds of other strain gauge designs which are already in...

The T10F torque transducer is well proven and reliable and can be used in many...

The T12HP torque transducer offers exceptional precision and superior performance for dynamic measurements in test benches to increase efficiency and optimize...

When it comes to torque measurement applications with high demands on torque capacities, HBM’s T12HT torque sensor is the reliable and precise...

The T210 shaft torque sensor is well-equipped to be used universally and is often found in end-of-line applications or in development test...

The T21WN torque transducer is ideal for measuring low torque as well as rotational speed or angle of...

The T22 torque transducer is the compact and quickly integrable solution for measuring torque of up to 1 kNm in many...

Cost-effective, robust and precise. The versatile T40B torque sensor is ideally suited for test bench applications in research and development, as well as End-of-Line tests (EoL) in...

T40CB torque sensor is a compact, short, and mass-optimized torque flange with a central bore of 37.5mm and 46.5mm for high speeds up to 30,000...

The T40FH digital torque flange for high torque up to 300...

The T40FM torque transducer measures dynamic torques up to 80 kN·m precisely and reliably. It offers an excellent price-to-performance ratio, returns reliably precise measurement results and is easy to...

Short T40HS torque flange for rotational speeds up to 45,000 rpm. The perfect solution for motorsport engine or aerospace...

T40MAR Torque Transducer for Monitoring and Control of Ship...

The T40MC torque transducer has been developed for integration into ship engines with neutral installation requirements. It is ideal for monitoring load signals, either for new ship engines or as a retrofit...

T40MS Torque Transducer: from 500 Nm to 2 kNm at 25,000 rpm T40MS is outstanding for its precision, reproducibility and robustness and is particularly well-suited for static and dynamic torque...

The T5 torque transducer offers very high precision and has a broad measuring range. It has been used in thousands of applications for many...

The reference torque transducer TB1A has a particularly high stiffness and can be used with its flat design even in very small...

The reference torque transducer TB2 is an extremely precise and economical solution for the calibration of torque...

TEDSdongle - For your own applications: Dongle for writing your own data to...

Plug and Measure with an electronic data sheet in the...

SoMat Test Control Environment (TCE) is the Microsoft Windows-based® test control and setup interface software that is supplied with every eDAQ and eDAQ-lite data acquisition...

The TIM-EC interface module offers an extremely flexible solution for transmitting torque and speed signals digitally via the EtherCAT fieldbus...

The TIM-PN interface module offers an extremely flexible solution for transmitting torque and speed signals digitally via the PROFINET fieldbus...

The TIM40 torque interface module provides additional analog and digital outputs to extend the range of applications of your T40 series...

The TN torque transfer transducer is a non-rotating torque transducer specifically for use as a transfer standard or as a reference transducer in calibration laboratories and it complies with the most stringent accuracy and stability...

The TT-3/100 temperature sensor has the appearance of a strain gauge and is installed in the same way. Installation is also possible on curved surfaces. Another plus for TT-3/100 is its short response time to temperature...

TT-3/100 - The Temperature Sensor that is Installed as Easily as a Strain...

The TTS transfer torque wrench is used to check and calibrate torque wrench calibration...

The U2B is a force transducer that is suitable for measuring static or dynamic, tensile and compressive loads. The sensor utilizes an integral lateral force compensation system for immunity to side loads. The sensor is manufactured from stainless...

It fits into any space: The U9C miniature load cell is ideal for measuring tensile and compressive force where space is a constraint and, at the same time, it is very cost-effective. Ranges are available from 50N to...

For connecting T20WN, T21WN, T22 torque...

VY full bridge strain gauges (SGs) have 4 measuring grids, which are arranged so that each is offset to the next at an angle of 90°. Typical applications for full bridge SGs include measurements on tension/compression bars and torsion bars and...

The W1ELA/0 displacement transducer in plunger version enables precise measurement of short displacements directly during the...

Displacement transducers of the WA-L with loose plunger series feature impressively reliable and extremely precise measurement results. They have been tried and tested a thousand times over in the most diverse...

Displacement transducers of the WA-T series in the probe version feature impressively reliable and highly accurate measurement results. They have already been tried and tested a thousand times over in the most diverse...

WI displacement sensors are extremely economical and highly compact, ensuring reliable results for displacement measurements for a wide variety of...

The WindMETER system is a reliable monitoring solution specifically designed to monitor wind generator blades. It combines sensors and data acquisition hardware to provide real-time measurements, and is designed to integrate and upstream the...

Our range of cables, stranded wires, and wires will give you the option to buy the exact accessories that you need for wiring strain gauges in transducers and...

X120 adhesive is intended for installing optical fibers, primarily OptiMet PKF. X120 is easy and fast to...

X280 cold curing adhesive is always a good choice for strain gauge installation, in cases where strain measurements need to be taken at higher temperatures, but a hot curing adhesive cannot be...

X60 is the proven fast curing adhesive for experimental tests, porous materials, and use at low temperatures. X60 adhesive is very easy to use and is also suitable for fixing cables and sensors in...

XY strain gauges of the T rosettes type have 2 measuring grids arranged at a 90° degree offset from each other. Typical applications for these strain gauges include analysis of a biaxial stress state with known principal directions as well as...

Types XY1, XY2 and XY4 are V-shaped strain gauges (SGs) with 2 measuring grids arranged at an angle of about 45° to the SG axis. Typical applications for these strain gauges include measurements on torsion bars and determining shear stresses as...

Determining residual stresses in materials (e.g. during casting, welding and forming processes) becomes easy with HBM's special strain gauges. These special strain gauges for residual stress analysis are available for precise and safe high-speed...

With its extremely fast curing time, fast-acting superglue Z70 is the ideal choice for many experimental tests involving strain gauges, and also in sensor manufacturing (whenever the accuracy requirements are not too...

Analog Amplifier for Industrial Applications.  Clip is available until the end of 2019 and is being replaced with the new and precise signal conditioner...

The model DF30CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor...

The model DF30DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor...

The model DF30DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor...

The model DF31CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital...

The model DF31DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital...

The model DF31DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital...

For fast signals, the 25 MS/s high...

32+8 binary channels, 1 MS/s Digital Input Card, 512 MB RAM, TTL level/light, SubD/LWL input...

The Bridge ISO 200 kS/s Input Card...

The Bridge ISO 1 MS/s Input Card...

For ultra fast signals, the 100 MS/s high...

4 Channel, 200kS/s Universal Card, 128MB RAM (16 MS/ch)...

64 binary channels, 1 MS/s Digital Input Card, 512 MB RAM, TTL Level, 4 SubD input...

The LI66 strain gauge is embedded directly in the structure during the fiber composite production process. This allows measurements in places that are no longer accessible after...

The intelligent process controller MP85A-S EasySwitch measures function and operation feeling (haptics) of switches as well as closing elements - and allows a 100 percent process and quality...

Amplifier for strain gage transducers with 4 mA to 20 mA output...

SK5, SK6 and SK12 slip-ring assemblies transfer measurement signals from rotating electrical transducers to stationary measuring...

The ultra-rugged data recorder for reliable, unattended data logging | Web interface allows for full real-time access to measured data from anywhere | Integrated CAN interfaces enable acquisition of vehicle data | Can be individually combined with...

The T10FS torque flange adds to the outstanding market reputation of the T10F torque flange, extending the range covered to greater accuracy, higher speeds and smaller outside diameters. It is based on a modified T10F measuring body and also uses...

The T4A, slip ring torque sensor is specifically designed for measuring static and dynamic torque measurement in production monitoring and quality...

4 Channel, 200kS/s Universal Card, 128MB RAM (16 MS/ch) -...