product

6-channel isolated balanced differential inputs up to...

Isolated balanced differential inputs up to...

High speed DAQ cards 25 MS/s or 100 MS/s or 250...

The GEN DAQ Basic/IEPE ISO 2 MS/s...

GEN DAQ Basic/IEPE ISO 200 kS/s Input Card is a general purpose signal...

8-channel universal input with sample rate of 500...

The Interface Gold Standard® Calibration System using the Interface Gold Standard® Load Cell ensures a metrology system of the highest accuracy and lowest uncertainty...

The Gold Standard™ System is a complete PC-based system for the calibration of load cells and torque transducers. Normally the system is used with a hydraulic load frame which can either be supplied by the user or by Interface...

The Gold Standard™ System is a portable system based on the 9840 intelligent indicator for the calibration of load cells and torque...

Interface Portable E4 Machine Verification System integrates our Model 9840 Intelligent Indicator with any Windows-based laptop computer. This solution creates a portable system for in-field verification of force test machines. This verification...

The GY407D is the first rate gyro to support SCPI-like commands, return data in engineering units, and work with an ASCII terminal emulator. It also performs basic functions such as evaluating minimum, maximum, magnitude, and peak-to-peak. The...

Type 2270-S With Sound Intensity Software BZ‐7233 And Sound Intensity Probe Kit For 2270 Type 3654 A complete kit for noise source location, sound power calculations and noise mapping using a two-channel sound level...

HazardPRO ambient temperature sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is...

HazardPRO shaft RPM sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is...

HazardPRO stud-mount temperature sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is...

HazardPRO temperature sensors read the temperature of bearings, rub blocks, and equipment surfaces and are 2-wire, loop-powered devices. All models are compatible with HazardPRO nodes, standard I.S. barriers, and PLC analog inputs and are identical...

The HazardPRO Node provides Intrinsically...

HBK 2255 Sound Level Meter is an advanced, single-channel, class 1 sound level meter. While the instrument can be used as a stand-alone measurement device, it also works with our task-tailored mobile and PC apps and features a powerful open...

HBK 2255 Sound Level Meter is an advanced, single-channel, class 1 sound level meter. While the instrument can be used as a stand-alone measurement device, it also works with our task-tailored mobile and PC apps and features a powerful open...

HBM amplifiers ready for...

AED Basic Devices - The AED Basic Devices: The Right Connection for the AD103C...

C16 / M - Tank weighing module for 20 t ... 200...

The HC485 DigiSense™ Displacement Sensor is available in seven bipolar measurement ranges, with standard strokes from ± .050 inches to ± 3.0 inches. Operating on a single ended 8.5 to 30.0 volt dc. input and a two-wire addressable RS-485 output,...

HCA-RA right angle series LVDTs are tungsten-inert gas (TIG) welded for hermetic sealing with an easy to install radial connector termination. A design improvement to the standard HCA series, the HCA-RA has a through bore design and a right angle...

The HCA Series LVDTs are tungsten-inert gas (TIG) welded to form a hermetic seal that is impervious to dirt, water, steam and corrosive liquids and vapors. They feature a glass-sealed, MS-type connector, but do not permit through bore operation. (A...

The HCD series LVDTs are impervious to dirt, water, steam spray and most corrosives. Tungsten inert gas (TIG) welding provides hermetic sealing that is free from oxidation-producing faults that may cause leakage. They have been qualified at...

The HCT Series LVDT transmitters are the perfect choice for high performance measurements in environments containing moisture, dirt, and fluid contaminants. Operating on a +10.5 to +28VDC loop voltage, the HCT delivers a smooth 4-20mA current loop...

The new HE grip has been ergonomically designed to fit comfortably in either hand – eliminating the need for separate left- and right-hand mouldings – and its main body is molded as a single component to improve rigidity and...

HE950 sensors monitor gear-teeth, spokes, or keyways and produce a digital pulse signal for use with speed switches, tachometers, counters, and signal conditioners, or as a direct pulse input into...

The HH100 Hand-Held Digital Tachometer combines both contact and non-contact sensing to accurately measure RPM, surface speed, and...

High Speed Pulser Wraps are aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic...

The HLP190 range of hybrid linear potentiometers have a body diameter of only 19mm. Stroke lengths are from 25mm to 150mm, with a choice of body clamp (BS) or flange (FS) mounting. This model is supplied with a spring loaded shaft, biased to the...

Based on the rugged HS1101LF capacitive humidity sensor, HM1500LF is a dedicated humidity transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with...

Based on the rugged HS1101LF capacitive humidity sensor, HM1520LF is a dedicated humidity transducer designed for measurements at low humidity. Direct measurement of dew point or water concentration can be easily obtained in really cost effective...

The HR Series of LVDTs is highly reliability and is suitable for most general applications. The HR Series features a large core-to-bore clearance, high output voltage over a broad range of excitation frequencies, and a magnetic stainless steel case...

The HR-T Series LVDTs are a variant of the popular HR Series. The HR-T Series LVDTs provide the optimum performance required for a majority of high-temperature applications up to 392°F continuous. The large 1/16 inch bore-to-core radial clearance...

The model HRBSC is a single-channel high resolution signal conditioning board. This board offers many additional features over the SCB1 for users requiring the highest levels of accuracy and...

Based on the rugged HTS2010 humidity / temperature sensor, HTM2500 is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made...

Humidity sensors can improve performance, reduce energy consumption and increase safety in a variety of applications. Increasingly, OEMs are designing relative humidity/temperature sensors into engines, electronics, and other products to improve...

The High Voltage impulse attenuator together with the ISOBE5600 transient recorder and the Perception High Voltage Impulse Analysis option (HV-IA) form an application specific measurement solution. Together the three components offer a cost...

Measurement Specialties has developed this low cost interface amplifier specifically for use with the IB-ACH-01. It is designed to mate directly to the connector supplied with the ACH-01-03 assembly. For use with either the ACH-01-02 or ACH-01-04,...

ICPA is a stainless steel compression-only load cell typically used in higher force applications. Available in capacities from 2MT to...

Designed specifically for use in hydraulic and pneumatic actuator applications, where the sensor is fitted inside the pressurized...

The ICT050 Contactless In-Cylinder Linear Transducer combines the best features associated with LVDTs and potentiometers into one rugged, contactless and highly reliable displacement...

The ICT080 Contactless In-Cylinder Linear Transducer combines the best features associated with LVDTs and potentiometers into one rugged, contactless and highly reliable displacement...

The ICT100 Contactless In-Cylinder Linear Transducer combines the best features associated with LVDTs and potentiometers into one rugged, contactless and highly reliable displacement...

Product Brand: Penny &...

Product Brand: Penny &...

The IEM 422 is a line powered current transmitter designed for industrial process control applications. The unit consists of a power supply and LVDT conditioner module pre-set to supply a 4 to 20 mA output from a 115 or 230 volt AC supply. The IEM...

This complete solution simplifies your job of measuring impulse noise, providing all the hardware and software required in one easy to use package and a simple setup procedure and...

Model INF-USB3 PC Interface Module makes any Load Cell USB...

The Interface INF1-Analog Single Sensor Weight Transmitter and Indicator with six-digit red LED display (8 mm height). Space saving compact...

The Interface INF1-Ethernet IP Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...

The Interface INF1-Ethernet TCP IP Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...

The Interface INF1-Modbus TCP Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...

The Interface INF1-RS485 Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...

The Interface INF4-Analog Two, Three, and Four Sensor Weight Transmitter and Indicator with six-digit red LED display (8 mm...

The Interface INF4-Ethernet IP Two, Three, and Four Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...

The Interface INF4-Ethernet TCP IP Two, Three, and Four Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...

The Interface INF4-Modbus TCP Two, Three, and Four Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...

The Interface INF4-RS485 Two, Three, and Four Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator...

InField is a versatile field analysis software program optimized for use with SoMat...

Insight+ enables the total experience of NVH data ‐ creating sounds directly from CAE models that NVH engineers can listen to and experience. The CAE model data can be combined with test data to create an immersive, realistic...

The IFC15 is the ultimate electronic processor, providing total compensation to enhance flowmeter accuracy, while extending the linear flow range. This compact design has dual rotor frequency inputs, temperature...

...

ION Analog Input Node (AIN) - (12) 4-20mA inputs, Modbus RTU...

The ioProTM family provides a comprehensive set of DIN high density rail mount IO modules for any Modbus-RTU application. Based on the successful ioPak family, but with new features and improved...

Model ISG Isolated DIN Rail Mount Signal Conditioner features a galvanically isolated power supply for use in high noise applications. This product has options for ±5VDC, ±10VDC and 4-20mA Outputs. Model ISG also has a 1 Hz to 1 kHz adjustable...

The ISHK-B load shackles are designed for lifting and weighing in rugged or harsh environments, including submersible applications.  The basic shackle uses the Crosby G2130 (1 to 25 MT / 2.2K to 55.1K lbf), G2140 (40 to 120 MT / 88.2K to 265K lbf)...

ISHK-D ‘D’ Type Crosby™ Cabled Load Shackle is designed for lifting and weighing in rugged or harsh environments. The basic shackle uses the Crosby G2150 series and are available in a range from 1 MT to 35 MT (2.2K to 77.2K...

Measurement system with integrated optical...

Transmission system with integrated fiber-optic...

The model IT9101 is a rugged and simple device which provides a voltage divider feedback signal for incline position up to 240 degrees. The heart of the IT9101 is a magnetically-damped pendulum coupled to a conductive plastic precision...

The model IT9420 is a rugged yet simple device which provides a 4 to 20 mA current feedback signal for incline position. The heart of the IT9420 is a magnetically-damped pendulum coupled to a conductive plastic precision potentiometer. A highly...

The ITCA series load cell is ideal for measuring both tensile and compressive forces. Available in capacities from 1MT to...

Model ITL is great for lifting applications where short or long distances are involved. This product can be amplified with 5VDC, 10VDC or 4-20mA output and is available in capacities from 11K lbf to 220K lbf (5 to 100 metric...

The JC025 single axis fingertip rocker allows system designers to provide control of movement and speed in a single low-profile...

The JC030 single axis fingertip rocker allows system designers to provide control of movement and speed in a single low-profile...

Developed for applications where ergonomics and system integrity are paramount, the JC100 is a compact, low profile joystick that provides smooth, precise fingertip control in one...

Developed for applications where ergonomics and system integrity are paramount, the JC120 is a minimum width, low profile joystick that provides smooth, precise fingertip control in one axis with a choice of two lever...

Product Brand: Penny &...

The JC150 single-axis joystick controller is designed for demanding operator control applications in off-highway vehicles and other man-machine interfaces, where lever strength, signal reliability, and handle functionality are...

Penny + Giles announces the release of a new single axis joystick controller design that enables use in heavy duty applications without compromising on smooth proportional control. The JC1500 joystick utilises contactless rotary position sensor...

Designed for use with a separate valve driver card or machine control unit, inductive coils inside the joystick generate a 4 to 6 volt reference signal from a 0 to 10v...

The JC2000 contactless joystick controller is designed for precision fingertip control applications where safety and long trouble-free life are primary...

Designed for use with an electronic controller, the JC300 can be specified to generate up to five switched outputs per half axis, or analogue and switched reference signals. This analogue output can be configured to provide signals for fault...

The JC3000 joystick controller is designed for applications requiring a simplistic approach to fingertip control, where strength and reliability are important. The joystick can be specified as a dual axis or single axis controller, and comes with a...

Developed for use in applications where compact size and functionality are important, the JC400 with analogue output offers proportional fingertip control in up to three axes, while the JC400 with Digital Output option offers switched fingertip...

The new JC6000 rugged joystick controller is designed for demanding operator control applications in off-highway vehicles and other man-machine interfaces, where strength, reliability, and handle functionality are...

The new JC8000 rugged joystick controller is designed for demanding operator control applications in off-highway vehicles, where extreme strength, reliability, and handle functionality are...

The JDI-100/200 series is a digitally temperature compensated inclinometer available in single and dual axis...

JK 0030A1 is a powered loop isolator specially designed to isolate 0...4......

The JK1000A4 Isolated Sensor Power Supply is designed to provide a simple and economical solution to all 2-wire sensor power supply...

The JK 2000, DIN-rail mountable, self-powered loop isolator, helps solve measurement and isolation problems...

The JK 3000 series allows the isolation and conditioning of analog process...

JK 6010A1 is an analog converter for alternating current...

The JK 7000 converter allows the isolation and transmission of a potentiometric...

The Jewell Instruments JMA-165 MEMS accelerometers are a cost effective and viable alternative to traditional force balance designs. This mighty little sensor is CENELEC, AREMA certified, and RoHS...

The Jewell Instruments JMA-165 MEMS accelerometers are a cost effective and viable alternative to traditional force balance designs. This mighty little sensor is CENELEC, AREMA certified, and RoHS compliant. Integrated HEATER...