zzz_Archive

Model AC-D02652 triaxial mounting...

Model AC-D02669 triaxial mounting...

Model AC-D03249 triaxial mounting...

The ACH-01 is an inexpensive, general purpose accelerometer with outstanding performance characteristics. The use of piezoelectric polymer film in the ACH-01 provides many cost/performance advantages that allow it to be used in a wide range of...

The TFX Ultra transit time meter measures clean liquids as well as those with small amounts of suspended solids or aeration such as surface water or...

TFX-5000 ultrasonic clamp-on meters are quickly and easily installed without cutting or tapping the pipe.  A highly capable meter, TFX-5000 provides advanced features for flow or heating/cooling energy...

TFX-500w Ultrasonic Clamp-on Flow...

TFXL transit time ultrasonic meters measure volumetric flow of clean liquids and is an economical meter designed to replace mechanical flow meters. Ultrasonic waves are transmitted from outside the pipe into the liquid and propagate upstream and...

The Preso TransCOIN is an integral standard transmitter mount flowmeter that accommodates most flows, even the most abrasive. Accuracy and reliability are achieved by its rugged construction, practical design, and simple principle of operation. It...

The UFX hand-held ultrasonic Doppler flow meter is a cost-effective flow measurement device for closed-pipe liquid systems containing suspended particles or gas bubbles. A non-invasive, hand-held transducer is placed on the outside of metal or...

Model V-Brass Series is a Venturi style flow meter of the “Low Pressure Loss” design. It is machined according to exacting specifications using high quality materials. This unit is produced from solid brass hex bar and comes with NPT or sweat...

The Venturi Model LPL (Low Pressure Loss Venturi Design) is a Venturi Nozzle design differential pressure flow device. The Low-Loss Design with over 35 years of proven field performance in a wide variety of applications provides reduced operating...

The Model PFV FM approved Fire Pump System features the Preso CV Venturi. The CV is a differential pressure element designed to accurately measure flow. It can be installed in any position with minimal straight pipe requirements (5 pipe diameters up...

The Venturi Model SSL (Classical Venturi Design) is a Hershel/Classical design differential pressure flow device. The Venturi flow meter restricts the flow at its throat, increasing the velocity of the fluid, and measures the pressure difference of...

The Venturi Model SSM is a Venturi Nozzle design differential pressure flow device. The Preso Hydraulic pure static design utilizes the proven classical ASME and ISO standards for highest accuracy, predictability and repeatability. The flow...

The Venturi Model VILPL (Low Pressure Loss Venturi Design Insert) is a Venturi Nozzle design differential pressure flow device. The Preso VILPL low-loss design is also available in the stainless steel. The all 304 stainless steel construction...

The Venturi Model VISSM (Nozzle Design Venturi Insert) is a Venturi Nozzle design differential pressure flow device. The Preso hydraulic pure static design is also available in the Model VISSM. This unique hydraulic shape generates a flow condition...

Badger Meter’s Vision Turbine Flow Meter is designed to improve the performance of a wide range of products. Suitable for measuring low-viscosity and non-aggressive liquids, it features simple mechanical construction to extend service life without...

...

The small size and built-in power regulation allow the XL403A to fit where other accelerometers can’t. Choose bandwidth up to 800 Hz and range options of ±1 g to ±15 g to measure accelerations on one, two or three...

The model XL403D is the first accelerometer to support SCPI-like commands, return data in engineering units, and work with an ASCII terminal emulator. It also performs basic functions such as evaluating minimum, maximum, magnitude, peak-to-peak,...

The Model 1630 is a fully piezo resistive silicon pressure sensor for use in intra-uterine pressure monitoring. The sensor is designed to be used with automated assembly equipment and can be dropped directly into a customer's disposable intrauterine...

Model 9390 has a 6-digit Unipolar display in a rugged NEMA 4X Stainless Steel washdown enclosure. This instrument can power up to 4 load cells for portable and can be used for remote weighing applications. Standby mode is available for extended...

Model 9820 is a bipolar, 5-digit display featuring 2000Hz high-bandwidth, up to ±10V analog output, front-panel shunt calibration and tare, peak and valley monitoring. Sensor connection is via a removable screw-terminal...

For use with amplified load cells and rotary torque sensors. Features 120 readings per second, programmable +/-10V or 4-20mA analog output, peak and valley monitoring, RS232. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in...

Description: The A125 Cable-Extension Transducer is an optical encoder based compact, flexible and highly accurate position feedback transducer. The standard A125 can be simply modified to meet specific OEM requirements. Just about any encoder type...

The A250 Cable-Extension Transducer is an optical encoder based compact, flexible and highly accurate position feedback transducer. The standard A250 can be simply modified to meet specific OEM requirements. Just about any encoder type can be used...

Low-cost 2D laser scanners with new CMOS camera technology, on-board processor, and...

AccuStar® II/DAS-20 combines the function of two clinometers in one package. The unique dome shaped design features a capacitance based sensor which produces output signals directly proportional to the relative tilt in two axes. Designed for high...

The AngleStar® Electronic Clinometer is an angle measurement device that produces a DC voltage output signal proportional to the level and direction of angular displacement. The sensing element, which is fluid filled, produces a variable resistance...

The AccuRange 2000 Laser Distance Meter offers measurement accuracy of 1mm (.04 in) across distances up to 500 meters, and even works on hot surfaces and in bright...

The AR651Laser Micrometer incorporates the latest...

Analog Amplifier for Industrial Applications.  Clip is available until the end of 2019 and is being replaced with the new and precise signal conditioner...

Model DCA is powered by 10-28V supply and user selectable ±10V, ±5V or 4-20mA output in a small NEMA 4X sealed ABS enclosure. This product features 100Hz...

The model DF30CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor...

The model DF30DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor...

The model DF30DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor...

The model DF31CAN is compatible with strain gauge transducers, and features a CANbus digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital...

The model DF31DN is compatible with strain gauge transducers, and features a DeviceNet digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital...

The model DF31DP is compatible with strain gauge transducers, and features a Profibus DP digital interface and TEDS sensor recognition. Also features 1 digital input and 2 digital...

The EPB-PW pressure transducer is specifically designed for pore water applications in either centrifuges or laboratory equipment. Using either ceramic or bronze sintered filters, the sensor can be used on clay or sand-based materials. Made of...

The FA101 is a general purpose accelerometer which is especially useful for measuring low-level ranges. Packaged in a rugged metal case, the FA101 accelerometers are designed for easy handling to suit a wide range of environmental conditions. They...

For fast signals, the 25 MS/s high...

32+8 binary channels, 1 MS/s Digital Input Card, 512 MB RAM, TTL level/light, SubD/LWL input...

The Bridge ISO 200 kS/s Input Card...

The Bridge ISO 1 MS/s Input Card...

For ultra fast signals, the 100 MS/s high...

4 Channel, 200kS/s Universal Card, 128MB RAM (16 MS/ch)...

64 binary channels, 1 MS/s Digital Input Card, 512 MB RAM, TTL Level, 4 SubD input...

Model INF-USB2 makes any load cell USB compatible. This product provides an easy interface for collecting data from an Interface transducer directly into your computer. Included software works well for convenient testing and monitoring applications...

The LI66 strain gauge is embedded directly in the structure during the fiber composite production process. This allows measurements in places that are no longer accessible after...

The intelligent process controller MP85A-S EasySwitch measures function and operation feeling (haptics) of switches as well as closing elements - and allows a 100 percent process and quality...

The PML1000 is an AC line powered LVDT/RVDT panel meter that is ideal for industrial and test applications. It features a 5 digit variable brightness LED display. For control applications, it has a fast (125 Hz) unscaled analog output, an isolated...

Amplifier for strain gage transducers with 4 mA to 20 mA output...

Model SI-USB makes any Load Cell USB Compatible. This product provides an easy interface for collecting data from an Interface transducer directly into your computer. The second channel can be used to collect and synchronize data from a second...

SK5, SK6 and SK12 slip-ring assemblies transfer measurement signals from rotating electrical transducers to stationary measuring...

The ultra-rugged data recorder for reliable, unattended data logging | Web interface allows for full real-time access to measured data from anywhere | Integrated CAN interfaces enable acquisition of vehicle data | Can be individually combined with...

The new STT280 sealed tilt sensor is designed to provide reliable, fit-and-forget tilt measurement sensing within an extremely compact housing, for the most arduous operating environments. The STT280 is suitable for use in applications such as road...

The new STT500 rugged, sealed tilt sensor is designed to provide reliable, fit-and-forget tilt measurement sensing within an extremely rugged cast aluminum housing, for the most arduous operating environments. The STT500 is suitable for use in...

The T10FS torque flange adds to the outstanding market reputation of the T10F torque flange, extending the range covered to greater accuracy, higher speeds and smaller outside diameters. It is based on a modified T10F measuring body and also uses...

The T4A, slip ring torque sensor is specifically designed for measuring static and dynamic torque measurement in production monitoring and quality...

The Model 4001A is an economical signal conditioned accelerometer with integral temperature compensation. The accelerometer incorporates a 2nd generation piezoresistive MEMS sensor providing outstanding performance. The accelerometer is packaged in...

The Model 7132AHT is a high temperature miniature triaxial IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer features a hermetically sealed titanium construction with a 4-pin Microtech connector interface. The model...

The Model 8011-06 is an internally shielded piezo velocity transducer designed for condition monitoring of low frequency rotating machinery. The transducer is available in ranges from 10.0 to 50.0 in/sec and interfaces with the standard IEPE...

The Model 8011-06 is an internally shielded piezo velocity transducer designed for condition monitoring of low frequency rotating machinery. The transducer is available in ranges from 10.0 to 50.0 in/sec and interfaces with the standard IEPE...

A personal noise dosimeter that simultaneously measures all parameters required by noise at work...

4 Channel, 200kS/s Universal Card, 128MB RAM (16 MS/ch) -...