Torque Sensors

Model 5330 reaction torque transducer features a large thru-hole design for use where mating fixtures, hydraulic or electrical lines need to pass through the...

Model 5350 Solid Flange Reaction torque transducer has threaded mounting holes and is available internal amplification for ±10V high-level output. This product is available in capacities ranging from 10 ozf-in to 200 ozf-in (0.07 to 1.41...

Model 5355 Solid Flange Reaction torque transducer has threaded mounting holes and is available internal amplification for ±10V high-level output. Available in capacities ranging from 20 lbf-in to 100K lbf-in (2.26 to 11.3K...

Model 5400 series features a rugged flange-style design, low deflection, high torsional stiffness and the ability to withstand large overhung moments. Available capacities from 110 to 55K Nm (1K to 500K...

Model 5500 Series Calibration Grade Reaction Torque Transducer features a rugged flange-style design, low deflection, high torsional stiffness and the ability to withstand large overhung moments. ASTM E2428 Calibrations are available on most...

The MRT’s flange design offers ease of installation in a low capacity, compact design. The low deflection and high torsional stiffness make the MRT a good choice for reciprocating measurements. Available capacities 0.2 Nm up to 20 Nm (1.77 lbf-in...

Model MRT2’s flange design offers ease of installation in a low capacity, compact design. The low deflection and high torsional stiffness make the MRT a good choice for reciprocating measurements. Available capacities from 5 Nm to 50 Nm (44.3...

Model MRT2P features 3X safe overload in 0.2 Nm and 2 Nm (1.77 to 17.7 lbf-in) capacities. The flange design makes it easy to mount. This product has low deflection and high torsional stiffness, which makes it a good choice for reciprocating...

Model MRTP features 7X safe overload in a 0.2 Nm (1.77 lbf-in) capacity. The flange design makes it easy to mount. This product has low deflection and high torsional stiffness, which makes it a good choice for reciprocating...

The T10F torque transducer is well proven and reliable and can be used in many...

The T12HP torque transducer offers exceptional precision and superior performance for dynamic measurements in test benches to increase efficiency and optimize...

When it comes to torque measurement applications with high demands on torque capacities, HBM’s T12HT torque sensor is the reliable and precise...

The T210 shaft torque sensor is well-equipped to be used universally and is often found in end-of-line applications or in development test...

The T21WN torque transducer is ideal for measuring low torque as well as rotational speed or angle of...

The T22 torque transducer is the compact and quickly integrable solution for measuring torque of up to 1 kNm in many...

Cost-effective, robust and precise. The versatile T40B torque sensor is ideally suited for test bench applications in research and development, as well as End-of-Line tests (EoL) in...

T40CB torque sensor is a compact, short, and mass-optimized torque flange with a central bore of 37.5mm and 46.5mm for high speeds up to 30,000...

The T40FH digital torque flange for high torque up to 300...

The T40FM torque transducer measures dynamic torques up to 80 kN·m precisely and reliably. It offers an excellent price-to-performance ratio, returns reliably precise measurement results and is easy to...

Short T40HS torque flange for rotational speeds up to 45,000 rpm. The perfect solution for motorsport engine or aerospace...

T40MAR Torque Transducer for Monitoring and Control of Ship...

The T40MC torque transducer has been developed for integration into ship engines with neutral installation requirements. It is ideal for monitoring load signals, either for new ship engines or as a retrofit...

T40MS Torque Transducer: from 500 Nm to 2 kNm at 25,000 rpm T40MS is outstanding for its precision, reproducibility and robustness and is particularly well-suited for static and dynamic torque...

The T5 torque transducer offers very high precision and has a broad measuring range. It has been used in thousands of applications for many...

The reference torque transducer TB1A has a particularly high stiffness and can be used with its flat design even in very small...

The reference torque transducer TB2 is an extremely precise and economical solution for the calibration of torque...

The TIM-EC interface module offers an extremely flexible solution for transmitting torque and speed signals digitally via the EtherCAT fieldbus...

The TIM-PN interface module offers an extremely flexible solution for transmitting torque and speed signals digitally via the PROFINET fieldbus...

The TIM40 torque interface module provides additional analog and digital outputs to extend the range of applications of your T40 series...

The TN torque transfer transducer is a non-rotating torque transducer specifically for use as a transfer standard or as a reference transducer in calibration laboratories and it complies with the most stringent accuracy and stability...

Features of the TS11 include threaded mounting holes and a center thru-hole design. Compact size allows mounting in tight spaces. Available capacities from 10 Nm to 20K Nm (88.5 lbf-in to 177K...

Features of the TS12 include convenient shaft-style mounting using standard couplings. The compact design allows mounting in tight spaces where rotational clearance is at a minimum. Available capacities from 0.005 Nm to 20K Nm (0.04 lbf-in to 177K...

The TS14 can be used to check torque wrenches and is useful for auditing fastener torque. Available capacities from 1 Nm to 5K Nm (8.85 lbf-in to 44.2K...

Model TS15 features a flange on one side and a female square connection on the other. Useful for bench-checking socket style torque wrenches. Available capacities from 2 Nm to 2K Nm (17.7 lbf-in to 17.7K...

The TS16 features a flange on one side and a male square drive connection on the other. Useful for fastener testing where the flange can be mounted to the bench and the square connection can accept sockets. Available capacities from 2 Nm to 2K Nm...

Model TS17 accepts standard hex-style screwdriver bits, useful for auditing fastener torque and checking screw installation after final assembly. Available capacities from 0.2 Nm to 20 Nm (1.77 lbf-in to 177...

Model TS18 has a convenient thru-hole flange mounting on one and a shaft on the other. Flange has internal pilot and the shaft is keyed per DIN 6885.1. Available capacities from 5 Nm to 2K Nm (44.3 lbf-in to 17.7K...

Model TS19 features an ultra-compact design, allowing the smallest possible flange-to-flange thickness of any reaction torque sensor. Both flanges include pilots. Available capacities from 50 Nm to 10K Nm (443 lbf-in to 88.5K...

Model TS20 Hollow Flange reaction torque transducer features a large thru-hole design. The thru-hole can be used for routing pneumatic or hydraulic lines, or wires, or can be used to pass a motor or actuator shaft. Available capacities from 10 Nm to...

Model TS21 miniature shaft style reaction torque transducer features keyed shafts and a compact package with short overall length. The keyed shafts allow positive engagement with fixtures or couplings. Nominal torque from 1 Nm to 100 Nm (8.85...

Model TS22 overload protected low capacity reaction torque transducer offers very low capacities and features 5x overload protection on capacities up to 2Nm. Commonly used for medical device testing. Capacities from 0.005 Nm to 20 Nm (0.044 lbf-in...

Model TSQ product comes calibrated in clockwise and counter clockwise directions and is available in capacities ranging from 300K to 3,000K lbf-in (34K to 340K...

The TTS transfer torque wrench is used to check and calibrate torque wrench calibration...

For connecting T20WN, T21WN, T22 torque...