Electrosensors

1101 stainless steel Hall-effect sensors provide digital pulse output signals, and are designed for use with magnetic targets such as 60 Pole Pair Magnet Wheels, Pulser Wraps, or Pulser...

Electro-Sensors 1102 magneto resistive sensors are used with magnetic targets such as 60 pole pair magnet wheels, pulser wraps, or pulser discs to provide digital pulse output...

The 60 Pole Pair Magnet Wheel is a ferro-magnetic nylon wheel with 120 alternating magnetic poles infused within the material. It is 3-3/4 inches in diameter, with the magnetic surface on the outside circumference of the wheel. The magnets are...

The 60 Pole Pair Magnet Wheel is a ferro-magnetic nylon wheel with 120 alternating magnetic poles infused within the material. It is 3-3/4 inches in diameter, with the magnetic surface on the outside circumference of the wheel. The magnets are...

Heavy Duty Pulser Discs are constructed of nylon, PVC, aluminum, or stainless steel. Pulser Discs can be used with any Electro-Sensors Hall Effect or Magneto Resistive...

Heavy Duty Pulser Discs are constructed of nylon, PVC, aluminum, or stainless steel. Pulser Discs can be used with any Electro-Sensors Hall Effect or Magneto Resistive...

Heavy Duty Pulser Discs are constructed of nylon, PVC, aluminum, or stainless steel. Pulser Discs can be used with any Electro-Sensors Hall Effect or Magneto Resistive...

Heavy Duty Pulser Discs are constructed of nylon, PVC, aluminum, or stainless steel. Pulser Discs can be used with any Electro-Sensors Hall Effect or Magneto Resistive...

Rotary Shaft Encoders are ideal for use on any rotating shaft to provide a digital output signal to tachometers, counters, speed switches, motor controls, or anything requiring a pulse input. Flexible shaft couplings are available as an option to...

Rotary Shaft Encoders are ideal for use on any rotating shaft to provide a digital output signal to tachometers, counters, speed switches, motor controls, or anything requiring a pulse input. Flexible shaft couplings are available as an option to...

Rotary Shaft Encoders are ideal for use on any rotating shaft to provide a digital output signal to tachometers, counters, speed switches, motor controls, or anything requiring a pulse input. Flexible shaft couplings are available as an option to...

Electro-Sensors Model 608 is an 8mm unshielded proximity...

Electro-Sensors Model 608-1 is an 8mm shielded proximity...

Electro-Sensors Model 612 is a 12mm unshielded proximity...

Electro-Sensors Model 612-1 is a 12mm shielded proximity...

Electro-Sensors Model 618 is an 18mm unshielded proximity...

Electro-Sensors Model 618-1 is an 18mm shielded proximity...

Electro-Sensors Model 630 is a 30mm unshielded proximity...

Electro-Sensors Model 630-1 is a 30mm shielded proximity...

The 906 standard Hall-effect sensor produces a digital pulse signal for use with speed switches, tachometers, counters, signal conditioners, or can be used as a direct pulse...

The 906B is a quadrature Hall-effect sensor is designed for applications requiring both speed and direction information. It produces a digital pulse signal for use with speed switches, tachometers, counters, signal conditioners, or can be used as a...

The 907 XP (explosion-proof) Hall-effect sensor produces a digital pulse signal for use with speed switches, tachometers, counters, signal conditioners, or can be used as a direct pulse...

The 907B XP Hall-effect quadrature sensor is designed for applications requiring both speed and direction information. Available in either the 907BV or 907BH configuration, it produces a digital pulse signal for use with speed switches, tachometers,...

Electro-Sensors 916A passive analog sensors are designed for use with pulse generators that provide magnetic targets, such as Electro-Sensors Pulser Discs and Split Collar Pulser Wraps. 916A sensors have a 3/4" threaded aluminum body, are supplied...

Electro-Sensors Model 917A XP passive analog sensors are designed for use with pulse generators that provide magnetic targets, such as Electro-Sensors Pulser Discs and Split Collar Pulser Wraps. 917A explosionproof sensors are mounted in a rugged...

Electro-Sensors 931 XP (explosion-proof) Hall-effect sensors provide digital pulse output signals, and are designed for use with magnetic targets such as Electro-Sensors 60 pole pair magnet wheels, pulser wraps, or pulser...

Electro-Sensors 932 Magneto Resistive sensors are used with magnetic targets such as Electro-Sensors 60 pole pair magnet wheels, pulser wraps, or pulser discs to provide digital pulse output...

Electro-Sensors 933 XP (explosion proof) Magneto Resistive sensors are used with magnetic targets such as Electro-Sensors 60 pole pair magnet wheels, pulser wraps, or pulser discs to provide digital pulse output...

The AC-D-4M Large Display Event Counter features bright 2.3-Inch LEDs that can be viewed easily from up to 100-feet...

Compact and accurate control potentiometer with digital display replaces traditional machine...

Compact and accurate control potentiometer with digital display replaces traditional machine...

The AIFO-200 is an interface device used between an analog signal and a frequency-input device typically used in applications where a process is monitored by a transducer, PLC, PC, or some other device that provides a 0–10 Vdc or 4–20 mA signal....

The AP1000 Series Digital Tachometer is a complete rate monitoring system that combines accuracy and reliability in a rugged, compact...

Model BA100-1 Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. These controls are used in pairs with one switch placed on each side of the conveyor belt. Each unit can be equipped with two limit...

Model BA100-1X Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. These controls are used in pairs with one switch placed on each side of the conveyor belt. Each unit can be equipped with two limit...

Model BA100-2 Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. These controls are used in pairs with one switch placed on each side of the conveyor belt. Each unit can be equipped with two limit...

Model BA100-2X Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. These controls are used in pairs with one switch placed on each side of the conveyor belt. Each unit can be equipped with two limit...

The CT6000 is a Full Logic Control Process Counter that can display up to three separate count values and compare them to programmable set points. The CT6000 can be programmed by the user for any pulse pre-scale value. The count can be programmed...

The DR1000 Speed Switch is a complete precision rotation monitoring system ideal for detecting unwanted slowdown or stoppage of process equipment. The system is commonly applied to the following: drive trains, power driven components, crushers,...

Electro-Sensors DRK 143TC Digital Ring Kits provide digital feedback from motors with NEMA C Face end bells. They can generate pulses down to zero speed and transmit without amplification up to 1500 feet. They are ideal pulse generators for speed...

Electro-Sensors DRK 182TC Digital Ring Kits provide digital feedback from motors with NEMA C Face end bells. They can generate pulses down to zero speed and transmit without amplification up to 1500 feet. They are ideal pulse generators for speed...

Electro-Sensors DRK 213TC Digital Ring Kits provide digital feedback from motors with NEMA C Face end bells. They can generate pulses down to zero speed and transmit without amplification up to 1500 feet. They are ideal pulse generators for speed...

Electro-Sensors DRK 254TC Digital Ring Kits provide digital feedback from motors with NEMA C Face end bells. They can generate pulses down to zero speed and transmit without amplification up to 1500 feet. They are ideal pulse generators for speed...

Electro-Sensors DRK 56C Digital Ring Kits provide digital feedback from motors with NEMA C Face end bells. They can generate pulses down to zero speed and transmit without amplification up to 1500 feet. They are ideal pulse generators for speed...

THE ELECTRO-SENTRY 1 IS A SINGLE LEG SYSTEM THAT COMBINES THE KEY ELEMENTS OF SHAFT SPEED, BELT ALIGNMENT, AND BEARING TEMPERATURE INTO AN EASY TO USE STAND-ALONE HAZARD MONITORING...

The EZ-100 Easy Mount Bracket Assembly takes all the hassle out of mounting traditional Speed Switches and Speed Sensors. The EZ-100 allows a Speed Switch or Speed Sensor to be mounted to a rotating shaft without the need of any additional brackets...

The EZ-SCP Easy Mount Bracket Assembly takes all the hassle out of mounting SCP-Series Speed Switches, and is ideal in new and retrofit applications. The EZ-SCP allows an SCP-Series Switch to be mounted to the end of a shaft without the need for any...

Electro-Sensor’s FB420 is an integral part of the Electro-Sentry™ Hazard Monitoring System but is also available as a stand alone shaft speed sensor. The FB420 provides a 4-20mA signal directly proportional to the rotational speed of a monitored...

HazardPRO ambient temperature sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is...

HazardPRO shaft RPM sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is...

HazardPRO stud-mount temperature sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is...

HazardPRO temperature sensors read the temperature of bearings, rub blocks, and equipment surfaces and are 2-wire, loop-powered devices. All models are compatible with HazardPRO nodes, standard I.S. barriers, and PLC analog inputs and are identical...

The HazardPRO Node provides Intrinsically...

HE950 sensors monitor gear-teeth, spokes, or keyways and produce a digital pulse signal for use with speed switches, tachometers, counters, and signal conditioners, or as a direct pulse input into...

The HH100 Hand-Held Digital Tachometer combines both contact and non-contact sensing to accurately measure RPM, surface speed, and...

High Speed Pulser Wraps are aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic...

LRB-1000 Speed Switches are complete systems with one individually adjustable set point for monitoring a single rotating...

LRB-2000 Speed Switches are complete systems with two individually adjustable set points for monitoring a single rotating...

M-Series Miniature Speed Switches are complete rotation monitoring systems ideal for detecting unwanted slow down or stoppage of process equipment. The M100 has a relay setpoint range of between 10RPM and 100RPM. The M5000 has a relay setpoint range...

The M100T and M5000T Miniature Speed Switches are complete rotation monitoring systems ideal for detecting unwanted slow down or stoppage of process equipment. These switches have a terminal block inside the housing for easy wiring connection and...

The Industry Preferred Standard for Use in Closed Loop Master/Follower Motor Drive Systems for Improving the Performance of AC and DC...

Miniature Pulser Wraps are PVC, aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic...

A cost-effective solution for precise master/follower velocity control of AC and DC variable speed...

The first fully-digital, bi-directional event synchronizer with electronic gearing/lineshaft functions for use with AC and DC variable speed...

Electro-Sensors MTS-20H standard probe with hanger is commonly used with tilt switch control unit SCU-200 to create a tilt switch system widely used in the process industry to sense the presence or absence of any bulk material. Typical applications...

Electro-Sensors MTS-30H heavy-duty probe with hanger is commonly used with tilt switch control unit SCU-200 to create a tilt switch system widely used in the process industry to sense the presence or absence of any bulk material. Typical...

Electro-Sensors MTSS-20H standard probe with hanger is commonly used with tilt switch control unit SCU-200 to create a tilt switch system widely used in the process industry to sense the presence or absence of any bulk material. Typical applications...

Electro-Sensors Tilt Switch System consists of a Control Unit and a Sensing Probe. It is widely used in the process industry to sense the presence or absence of any bulk material. Typical applications include: high or low bin level alarms, detection...

Narrow Pulser Wraps are PVC, aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic...

PD225 Heavy Duty Pulser Discs are constructed of PVC and can be used with any Electro-Sensors Hall-Effect or Magneto Resistive...

PD455 Heavy Duty Pulser Discs are constructed of PVC and can be used with any Electro-Sensors Hall Effect or Magneto Resistive...

PD725 Heavy Duty Pulser Discs are constructed of aluminum and can be used with any Electro-Sensors Hall Effect or Magneto Resistive...

PDE450 Heavy Duty Pulser Discs are constructed of PVC and can be used with any Electro-Sensors Hall Effect or Magneto Resistive...

The PVC-Series of corrosion-resistant speed switches are self-contained rotation monitoring systems that are ideal for detecting the unwanted slow down or stoppage of process...

The QDRK 143TC Quadrature Ring Kit provides a digital, quadrature (bi-directional) feedback signal from motors with NEMA C Face end bells. The QDRK Series is designed for use with electronic control equipment requiring rotational direction...

The QDRK 182TC Quadrature Ring Kit provides a digital, quadrature (bi-directional) feedback signal from motors with NEMA C Face end bells. The QDRK Series is designed for use with electronic control equipment requiring rotational direction...

The QDRK 213TC Quadrature Ring Kit provides a digital, quadrature (bi-directional) feedback signal from motors with NEMA C Face end bells. The QDRK Series is designed for use with electronic control equipment requiring rotational direction...

The QDRK 254TC Quadrature Ring Kit provides a digital, quadrature (bi-directional) feedback signal from motors with NEMA C Face end bells. The QDRK Series is designed for use with electronic control equipment requiring rotational direction...

The QDRK 56C Quadrature Ring Kit provides a digital, quadrature (bi-directional) feedback signal from motors with NEMA C Face end bells. The QDRK Series is designed for use with electronic control equipment requiring rotational direction...

Electro-Sensors offers 3 types of rub block door...

The Electro-Sensors SA420 Signal Conditioner is a complete system which provides an analog signal directly proportional to the speed of a monitored shaft. The 0-10 Vdc and 4-20 mA outputs can be sent to a chart recorder, digital display, PLC, loop...

SCP1000 Presettable Machine Speed Switches are complete systems providing one individually adjustable relay set point, while monitoring a single rotating...

SCP2000 Presettable Machine Speed Switches are complete systems providing two individually adjustable relay set points, while monitoring a single rotating...

Electro-Sensors Tilt Switch System consists of a Control Unit and a Sensing Probe. It is widely used in the process industry to sense the presence or absence of any bulk material. Typical applications include: high or low bin level alarms, detection...

Series 18 sensors are available in a range of output sensing and signaling options to meet even the most demanding application requirements. The sensors function by detecting passing magnets from a shaft-mounted pulser disc or wrap and output a...

Provides independent, accurate feedback of slide gate position to a controller (PLC) or optional remote slide gate...

Electro-Sensors’ SG1000B is a complete position monitoring system designed to sense the position of both linear and rack-and-pinion driven slide...

Electro-Sensors' SG1000C is a complete position monitoring system used to accurately measure the position of a process that has a repetitive single-turn rotary...

Electro-Sensors SG1000D Valve Position Monitor is a complete position monitoring system housed in a compact and rugged explosionproof NEMA 4X enclosure. It is an encoder-based position sensor providing a 4-20 mA output and is used to measure a...

Electro-Sensors SG1000E Sub-Turn Shaft Position Monitor is a complete position monitoring system housed in a compact and rugged explosionproof NEMA 4X housing. It is an encoder-based position sensor providing a 4-20 mA output and is used to measure...

Slotted Pulser Wraps are PVC, aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic...

Electro-Sensors SpeedTalker DN-BH is a DeviceNet speed sensor with alarms. ODVA conformance tested and housed in a rugged, stainless steel enclosure, the SpeedTalker DN-BH is designed to operate in demanding industrial environments. It features a...

Electro-Sensors SpeedTalker DN-XP is a DeviceNet speed sensor with alarms. ODVA conformance tested and housed in a rugged, explosion-proof enclosure, the SpeedTalker DN-XP is designed to operate in demanding, hazardous and industrial environments....

Electro-Sensors' SpeedTalker-DN (UI) converts pulse frequencies from external sensors to RPM units, providing tachometer measurement of up to two rotating shafts and the status of eight alarm functions over DeviceNet. The SpeedTalker DN (UI) is ODVA...

The SS-110 Slow Speed Switch is a complete system that has one adjustable set point for monitoring a single rotating...

The ST420 is an analog-output shaft speed sensor. It detects magnetic pulses from a rotating shaft-mounted magnetic pulser target (disc or wrap) and outputs a smooth continuous 4-20mA analog signal in direct proportion to the pulse frequency...

STAINLESS STEEL DISC-GUARDS protect your critical disc and sensor or switch from from impact or shock damage. Disc-Guards also help minimize the effects of dust, dirt, grease, and grime. Available for M & SCP-Series Switches and 907, 917 &...

Standard Pulser Wraps are PVC, aluminum, or stainless steel split collars with magnets mounted on the outside circumference. The magnets serve as targets for Hall Effect, and Magneto Resistive sensors that switch when exposed to magnetic...

The TR400 is a Full Logic Control Process Ratemeter that can display any production rate or time in process easily and...