Load Cells / Force Transducers

Model LWHP14 Load Washer is designed for use in force applications. Typical uses include monitoring the force required to press two parts together. This product is constructed from stainless steel and is available in capacities ranging from 0.05 kN...

Model LWHP18 Load Washer is designed for use in force applications. Typical uses include monitoring the force required to press two parts together. This product is constructed from stainless steel and is available in capacities ranging from 5 kN to...

Model LWMH1 Thru-Hole Load Cell is designed for use in force applications. This product is constructed from aluminium and is available in capacities ranging from 0.2 kN to 10 kN (45 to 2.25K...

Model LWMH2 Thru-Hole Load Cell is designed for use in force applications. Typical uses include monitoring the force required to press two parts together. This product is constructed from aluminium and is available in capacities ranging from 0.5 kN...

Model LWPF1 Press Force Load Cell features a large thru-hole and short overall height. This product is available in capacities ranging from 2 kN to 100 kN (450 to 22.5K...

Model LWPF2 Press Force Load Cell features a large thru-hole and short overall height. This product is available in capacities ranging from 100 kN to 600 kN (22.5K to 134.8K...

Model MB is a miniature beam load cell used in medical test machine and a variety of low capacity applications. Performance on this product is +/- 0.03% FS and available capacities are 5 to 250 lbf (22.2 N to 1.11...

Model MBI Overload Protected Mini Beam Load Cell has better resistance to off axis loads then other similar load cells and is fatigue rated. This product is available is capacities from 2 to 10 lbf (10 to 50...

The MBP is the same as MB mini beam with internal overload protestion. It is a miniature beam load cell used in medical test machine and a variety of low capacity applications. Available in capacities from 2.5 lbf. to 10...

Interface’s MBS Parallelogram load cell is made of lightweight aluminum construction and highly suitable for medical and robotics applications. This product is available is capacities from 2.2 to 10 lbf (9.8 to 44.5...

Model MCC is a miniature compression load cell used in medical test machine and a variety of low capacity applications.  500N (112.4 lb)...

The MCS10 multi-axis sensor measures up to 6 different forces and torques simultaneously and almost completely compensates for signal crosstalk – for exact measurement...

The MSC is a very small compression button-style load cell that has a relatively high capacity. This product is available in 15K, 20K and 30K lbf (65kN, 90kN, 130kN)...

Model MTFS Miniature Tension Load Cell is a small sized tension load cell that is available in capacity ranges from 1 kN to 100 kN (224.8 to 22.5K...

CFT piezoelectric force transducers from HBM are available with measuring ranges from 5 to 120 kN enabling reliable, integrated force measurement, in particular where space is a constraint. The transducers are suitable for monitoring highly dynamic...

The CFW piezoelectric force washers ensures reliable results in assembly and testing. Thanks to their compact design CFW force washers can be used in many different applications. They can be installed in both the force flow as well as the force...

The CHW piezoelectric force washers are ideally suited for use at extremely high or extremely low temperatures. They are used for measurement in hot rolling processes, sealing machines, or for mechanical testing under extreme climatic...

When no other load washer can be installed in your application: PACEline CLP piezoelectric load washers fit virtually anywhere due to their minimal height of typically 4 millimeters. The ideal solution for machine monitoring (e.g. welding machines)...

The CMA charge amplifier guarantees safe data acquisition from all piezoelectric sensors in numerous laboratory and production...

The PACEline CMD digital charge amplifier for piezoelectric sensors provides very high resolution and considerably better performance than others - and has an excellent price-performance...

The PACEline CMD digital charge amplifier for piezoelectric sensors provides very high resolution and considerably better performance than others - and has an excellent price-performance...

The CST/300 piezoelectric strain sensor precisely measures minimal strain ranging from a few µm/m up to its nominal strain of 300 µm/m, which is ideal for indirect force measurement, for instance, in the monitoring of press and welding...

PACEline from HBM are products used in force and strain measurement technology, and based on the piezoelectric effect. PACEline also has the appropriate solution for your application in all areas of quality or process monitoring. The use of PACEline...

In step with your production: PACEline is reliable piezo technology in HBM...

Model REC is a rod end load cell that is typically used with actuators. This product is available in capacities from 1K to 50K lbf (5 kN to 220...

The S2M S-type load cell is the most accurate of its kind and is ideally suited for smaller forces: The smallest measuring range is 10 N. The S2M also features an excellent price-to-performance...

S9M offers you an extremely precise, rugged and convenient S-shaped force transducer. Typical fields of application include test benches and torque measurements with a lever as well as production and monitoring...

Proven for decades, the SLB strain sensor is being used in applications that do not require or need to necessarily achieve extremely high accuracy levels, but instead where robust and cost-effective measuring equipment needs to be used. Its main...

The SLB700A/06VA is an active strain sensor fitted with smart electronics, which has been proven for many years in measurements concerning the force shunt. Standard output signals include 0 ... 10 V or 4 ... 20 mA. Its main application fields...

Model SM is a low cost highly accurate unsealed load cell for test machine and other general purpose applications. This product is available in capacities ranging from 10 to 1000 lbf (50 N to 5...

Model SMA is the miniature S-type load cell and great to use where size is a constraint. This product is available in capacities ranging from 15 to 200 lbf (60 to 900...

Model SML is a low height load cell with great performance! This product is available in capacities ranging from 5 to 2000 lbf (22 N to 9 kN). Tension and compression...

Model SMT is ideal for low capacity applications where loads cells are often inadvertently overloaded. The SMT has internal mechanical stops which prevents overloads for up to 10 times the rated...

Model SMTM is the miniature overload protected S-type load cell and great to use where size is a constraint. This product is available in capacities ranging from 5 to 50 lbf (20 to 200...

Model SPI is designed to be a high precision platform load cell. This product is compensated for off center loading and available in capacities ranging from 25 to 150 lbf (111.2 to 667.2...

Model SPI is designed to be a high precision platform load cell. This product is compensated for off center loading and available in capacities ranging from 3 to 15 lbf (13.34 to 66.72...

Model SSB is a highly accurate beam-type load cell for general purpose applications. This product is available in capacities ranging from 50 to 10,000 lbf (222.4 N to 44.48...

Model SSM is a moderately priced highly accurate sealed load cell for test machine and other general purpose applications. This product is available in capacities ranging from 50lbf to 10K...

Model SSM-FDH is a high temperature sealed load cell for test machine and other general purpose applications. This product is available in capacities ranging from 100 to 1K lbf (444 N to 10...

Model SSMF is a moderately priced fatigue rated sealed load cell for test machine and other general purpose applications. This product is available in capacities ranging from 25 to 2.5K lbf (100 N to 10...

Model SSMH S-type load cell provides a suitable force measurement sensor for applications in coal mining and transfer and other heavy industries where explosive dusts and environment conditions are potentially explosion-hazard rated. Available in 50...

The SuperSC is a economical general purpose load cell with a high force in a compact design. The SuperSC is environmentally sealed and insensitive to off axis loading. This product is available in capacities ranging from 25 to 1000 lbf (100 N to 5...

...

...

Model TXY Load Cell can measure in both X and Y...

The U2B is a force transducer that is suitable for measuring static or dynamic, tensile and compressive loads. The sensor utilizes an integral lateral force compensation system for immunity to side loads. The sensor is manufactured from stainless...

It fits into any space: The U9C miniature load cell is ideal for measuring tensile and compressive force where space is a constraint and, at the same time, it is very cost-effective. Ranges are available from 50N to...

Model ULC is the world’s most accurate ultra-low capacity load cell measuring loads from 0.5 to 2 N (50 grams to 500...

Model WMC is excellent for industrial applications because of its stainless steel, sealed, environmentally protected construction. This product is available in capacities ranging from 1K lbf to 10K lbf (5 kN to 45...

Model WMC is excellent for industrial applications because of its stainless steel, sealed, environmentally protected construction. This product is available in capacities ranging from 5 to 500 lbf (22 to 2200...

Interface Model WMC Rod End Load Cell is excellent for industrial applications because of its stainless steel, welded, environmentally protected construction. This product is available in capacities ranging from 15K to 200K lbf (66.7kN to 889.6...

Model WMCFP is excellent for industrial applications because of its stainless steel, sealed, environmentally protected construction. This product has overload protection which is an excellent safeguard in rugged applications. This product is...

Model WMCP is excellent for industrial applications because of its stainless steel, sealed, environmentally protected construction. This product has overload protection which is an excellent safeguard in rugged applications. This product is...

The WSSB S-Beam load cell series is ideal for measuring both tension and compressive forces where high accuracy measurements are required. IP68 rated and available in capacities from 250kg to...

The WSSCLC is constructed from stainless steel and has a fully welded construction, offering a high level of corrosion resistance for use in harsh environments, with environmental sealing to IP68. Available in capacities from 220 – 16.5K lbf (100...

The WSSCLC-MOUNT is a complete weighing assembly for use with the WSSCLC range of load...

Model WTS 1200 Standard Precision LowProfile™ Wireless Load Cell are designed for general purpose applications requiring a wireless load cell that is compensated for eccentric loads. This load cell can transmit distances up to 2000 feet (610...

The WTS-AM-1E connects to strain bridge transducers such as load cells, torque sensors, strain gauges and pressure modules and forms part of the WTS modular telemetry system. The data transmitted by the WTS-AM-1E can be received by multiple WTS...

The WTS-AM-1F transmitter connects to strain bridge transducers such as load cells, torque sensors, strain gauges and pressure modules and forms part of the WTS modular telemetry system. Transmits at 2000/samples per...

The WTS-AM-2 connects to 0-10 V conditioned sensors such as pressure, %RH, inclinometer, accelerometer, depth, vibration, temperature and flow. It forms part of the WTS modular telemetry...

The WTS-AM-3 transmitter module connects to 4-20 mA conditioned sensors such as pressure, %RH, inclinometer, accelerometer, depth, vibration, temperature and flow. It forms part of the WTS modular telemetry...

The WTS Telemetry Antenna WTS-ANTA, WTS-ANTB and WTS-ANTC can be integrated with any of the WTS modules which are factory fitted with UFL antenna...

The WTS-AR Wireless Repeater Module which will allow the WTS telemetry system modules to span around obstacles, increase range and coverage by retransmitting received...

The WTS-BS-1 is a roaming handheld allowing the operator to cycle the display between all available transmitter modules and forms part of the WTS modular telemetry system. It does not require pre-configuration of associated transmitters and will...

The WTS-BS-1-HA Wireless Multiple Transmitters handheld displays data from up to 12 wireless transmitter modules and forms part of the WTS modular telemetry system. It provides either a summed total from all selected transmitters and the ability to...

The WTS-BS-1-HS handheld displays data from any of the WTS wireless transmitter modules and forms part of the WTS modular telemetry system. It provides a point to point connection to a single...

The WTS-BS-3E is one of a range of base stations that are required for configuration and calibration of the WTS modular telemetry system. Base stations can also be used for data collection systems by making available the WTS wireless transmitter...

The WTS-BS-4 is one of a range of base stations for the WTS modular telemetry system. It has a USB interface, is housed in an IP67 enclosure and has better coverage than the...

Model WTSLP Wireless Stainless Steel Load Pin is great for lifting applications where short or long distances are involved. This product can transmit wirelessly up to 600 meters in distance (clear line of sight) to a handheld display or USB base...

The WTSSHK-B range of telemetry load shackles are manufactured using the Crosby™ G2130 (12 to 15 MT / 26.5K and 33.1K lbf) and G2140 (40 to 120 MT / 88.2K to 265K lbf) shackles. The built in radio telemetry electronics operates on the 2.4GHz...

The WTSSHK-B-HL range of telemetry load shackles are manufactured using the GN rope H10 shackle. Suitable for use in a wide range of industrial and marine heavy lift weighing applications, these load shackles provide a robust and effective method of...

WTSSHK-B-JR Wireless Crosby™ Bow Load Shackle range of telemetry load shackles are manufactured using the Crosby™ G2130 shackle. Suitable for use in a wide range of lower capacity industrial weighing applications, these load shackles are...

The WTSSHK-D range of telemetry load shackles are manufactured using the Crosby™ G2150 shackles. Versions are also available using the popular GreenPin™ range of shackles. The built in radio telemetry electronics operates on the 2.4GHz license...

WTSTL is great for lifting applications where short or long distances are involved. This product can transmit wirelessly up to 600 meters in distance (clear line of sight) to a handheld display or USB base station. Available in capacities  from 11K...

The miniature size and lightweight of the XFC200R facilitates testing where these conditions are necessary. Unlike sensors with flat force application surfaces, the XFC200R incorporates a spherical load button resulting in more precise measurements....

The miniature size and light weight of the XFC205R facilitates testing where these conditions are necessary. Unlike sensors with flat force application surfaces, the XFC205R incorporates a spherical load button resulting in more precise...

The XFL212R series is an extraordinarily thin miniature load cell with a temperature compensation module integrated into the output cable. This design allows Measurement-Specialties to manufacture extremely small sensors without sacrificing thermal...

The XFL225D series is a very flat miniature load cell with a temperature compensation module integrated into the output cable. This design allows Measurement-Specialties to manufacture extremely small sensors without sacrificing thermal zero and...

The XFTC300 series has been specifically developed to measure tension and/or compression in static and dynamic applications. The miniature size and light-weight facilitate testing where these conditions are necessary. The sensing element is fitted...

The XFTC301 series has been specifically developed to measure tension and compression in static and dynamic applications. The miniature size facilitates testing where space is at premium. The sensing element is fitted with a fully temperature...

The XFTC302 series has been specifically developed to measure tension and/or compression in static and dynamic applications. Fitted with metallic strain gages in a Wheatstone bridge circuit, the XFTC302 has the capacity of measuring heavy loads of...

The XFTC310 series has been specifically developed to measure tension and/or compression in static and dynamic applications. The miniature size and light weight facilitate testing where these conditions are necessary. The sensing element is fitted...

The XFTC311 series has been specifically developed to measure tension and compression in static and dynamic applications. The miniature size facilitates testing where space is at a premium. The sensing element is fitted with a fully temperature...

The XFTC320 series has been specifically developed to measure tension and/or compression in static and dynamic applications. The miniature size and light- weight facilitate testing where these conditions are necessary. The sensing element is fitted...

The XFTC321 series has been specifically developed to measure tension and compression in static and dynamic applications. The miniature size facilitates testing where space is at a premium. The sensing element is fitted with a fully temperature...

The XFTC322 series has been specifically developed to measure tension and/or compression in static and dynamic applications. Fitted with metallic strain gages in a Wheatstone bridge circuit, the XFTC322 has the capacity of measuring heavy loads of...

vailable in a range of measurements and a variety of mounting threads, the XFU400 is easily installed. Its miniature size facilitates testing where space is at a premium. The sensing element is fitted with a fully temperature compensated Wheatstone...