Accessories

ABM75 aluminum foil with kneadable putty is an easy-to-use strain gauge covering material. The product consists of a 0.05 mm thick aluminum foil coated with 3 mm thick kneadable putty. ABM75 is simply pressed by hand onto the measuring...

AK22 is a tough, kneadable putty that adheres to virtually any material. The putty is kneaded by hand onto the measuring point. It is recommended to use AK22 covering putty along with ABM75 aluminum foil, or even with a third layer of SG250 silicone...

BCY01 is an activator for the Z70 cyanacrylate adhesive. The curing of Z70 depends on the chemical state of the parts to be joined. There are conditions where curing may take place slowly or even remain incomplete; such as dry air (relative humidity...

Our range of cables, stranded wires, and wires can provide you with the right accessories for the wiring of strain gauges; for instance, they can be utilized in the internal wiring of strain gauge bridges or for connecting through strain gauges to...

EP150 is an easy-to-handle, hot-curing adhesive that is used in the process of strain gauge installation. In addition to being applied by a brush (included in the screw cap), EP150 can also be sprayed on. It is suitable for high ambient temperatures...

EP310N epoxy resin adhesive consists of two components and cures under heat and pressure. It is suitable for strain gauge installation for experimental tests usage, with extended temperature requirements and for transducer...

NG150 is an easy-to-apply, one-component covering material that ensures strain gauge protection. NG150 is applied to the measuring point with the brush integrated into the bottle’s screw cap and cures at room...

The P250 is a ready-to-use phenolic resin based adhesive. The P250-R is the phenolic resin for mixing the P250...

Get started right away: The printed circuit board test kit includes all materials you need for strain measurement on...

PU140 is an easy-to-apply, one-component covering material that ensures strain gauge protection. The polyurethane lacquer is applied to the measuring point with a brush integrated into the bottle’s screw cap and cures very quickly at room...

SG250 silicone rubber is a transparent, one-component covering material that protects strain-gauge installations. The product is solvent-free and cures in contact with air at room...

SL450 silicone resin provides optimal protection in applications that involve extremely high ambient temperatures. The covering material consists of transparent silicone resin, and it is applied to the measuring point with a brush integrated into...

Installation of strain gauges is even faster with our soldering terminals and soldering...

HBM provides different cleaning agents for cleaning measuring points and measurement objects prior to strain gauge...

Our strain gauge installation kits include all the materials you need for your strain gauge applications—available in beginner and professional...

Our range of cables, stranded wires, and wires will give you the option to buy the exact accessories that you need for wiring strain gauges in transducers and...

X120 adhesive is intended for installing optical fibers, primarily OptiMet PKF. X120 is easy and fast to...

X280 cold curing adhesive is always a good choice for strain gauge installation, in cases where strain measurements need to be taken at higher temperatures, but a hot curing adhesive cannot be...

X60 is the proven fast curing adhesive for experimental tests, porous materials, and use at low temperatures. X60 adhesive is very easy to use and is also suitable for fixing cables and sensors in...

With its extremely fast curing time, fast-acting superglue Z70 is the ideal choice for many experimental tests involving strain gauges, and also in sensor manufacturing (whenever the accuracy requirements are not too...