PHOTON+ is a versatile analyzer for sound and vibration measurements, recording, and signal post-processing. It consists of a small data acquisition hardware unit and PC software. It is quick to setup, and gives instant data verification on site, by processing results immediately. The user can switch between real-time measurements, recording
LAN-XI Notar is a tough recorder that captures time data from up to 12 channels of sound and vibration data. This system uses firmware installed on one module of our LAN-XI front-end hardware, which gives a choice of input channels, dynamic ranges, and connector types. The acquisition module is usually
BK Connect Order Analysis Applet is a dedicated tool for making order analysis on sound and vibration data, detecting patterns caused by inherent instabilities and imbalances in rotating or reciprocating machines. The software analyses raw time signals that have been recorded using two different styles of analysis in predefined set-ups.
BK Connect FFT Analysis Applet is a dedicated tool for making standard fast Fourier transform (FFT) analysis. Measurement and analysis can be performed using three different predefined set-ups based on standard BK Connect processing tasks for adjusting process properties and executing the predefined process chains. USE SCENARIOS On-site vibration troubleshooting
BK Connect Acoustic Camera Applet is designed to provide a simple measure-and-record solution that acquires data for noise source location applications and creates sound maps of sound intensity and sound pressure overlain with a synchronous video. The applet comprises all the software functionality needed for noise mapping and NSI in
BK Connect FFT, CPB and Overall Applet is designed for stationary and non-stationary testing that requires standard sound and vibration measurements using FFT, CPB and overall analysis. Like all BK Connect applets, it is a stand-alone tool that contains all the functionality needed to acquire data, perform analysis and create
BK Connect Loudness and Overall Analysis Applet is a dedicated tool for analysing sound quality (SQ) metrics. The applet calculates loudness and performs overall analysis for stationary and non-stationary signals according to ISO 532-1:2017. The applet contains all of the software tools required for performing general sound data acquisition analysis
BK Connect Hammer Impact Applet is a dedicated tool for characterizing structural properties such as resonances in troubleshooting, benchmarking, design verification, quality control or material testing scenarios using roving or fixed hammer impact testing. Acquired FRFs can also be exported to BK Connect Modal Analysis Types 8420 and 8420-A for a complete modal
This application takes recorded time data and resamples it so that it can be presented as a function of the rotation angle during the duty cycle of rotating machines, such as car engines. By relating sound and vibration data to the angle of the engine’s crankshaft or flywheel, it is
This BK Connect option analyses product sound quality using parameters that closely relate to the complete human experience of the sound, rather than using purely physical quantities such as sound pressure. The software can analyze recorded measurements using sound quality metrics such as ‘loudness’. Users can filter the sound using
This BK Connect option performs order analysis on sound and vibration signals, detecting sound and vibration patterns that are caused by inherent instabilities and imbalances in reciprocating or rotating machines. By relating the sound and vibration data to revolutions of moving parts, this software improves the engineer’s ability to find
This BK Connect option performs order analysis on sound and vibration signals, detecting sound and vibration patterns that are caused by inherent instabilities and imbalances in rotating or reciprocating machines. The software analyses raw time signals that have been recorded from transducers via data acquisition hardware and a PC computer.
Adding the BK Connect Calculation option to BK Connect Data Processing Type 8403 or BK Connect Data Processing Specialist Type 8404 adds advanced calculation options, while performing fast Fourier transformation (FFT) and overall level analysis. The calculation elements for the process chain are function statistics function operators scaling with unit conversion frequency weighting complex
This BK Connect application performs 1/n-octave - or constant percentage bandwidth (CPB) - analysis. Data can be acquired from just one and up to hundreds of channels connected via data acquisition hardware to a PC, which records the signals. This software analyses the time data as it is replayed. It can
This BK Connect option adds time correlation, amplitude demodulation – or envelope analysis – and infinite impulse response (IIR) filter to BK Connect Data Processing Type 8403 or BK Connect Data Processing Specialist Type 8404 for analysis of the vibration produced by a machine. The purpose is to find changes in the vibration pattern or
BK Connect Data Processing Specialist Type 8404 enables specialists to create process chains and analyze data immediately or save those chains as templates. Test engineers and operators (using the Type 8403 license) can quickly and easily make live measurements or load recorded data for post-processing using the pre-defined process chains. Specialists can
BK Connect Data Processing Type 8403 focuses on the operator’s and test engineer’s role, knowing that their use of the data acquisition and analysis software differs from the sound and vibration (S&V) specialist. Operators require the ability to quickly and easily load recorded data for post-processing or perform real-time analysis using
This software enables any measurements made using PULSE™LabShop to be labelled with metadata and saved to a database. This safe and orderly data storage gives access to the data across an organization – and even spanning the world. Efficient searching and inspection helps you find specific datasets and analyses, enabling
BK Connect Time Data Recorder is designed with users’ individual tasks in mind. The usage of the application is streamlined for both the test engineer and the specialist. In the lab, the engineer sets the triggers and parameters for the test and creates a template; during testing, the user executes
BK Connect Hardware Setup is designed so that test engineers and specialists can create and save custom, reusable set-ups without tying up the other acquisition or analysis licenses. The set-ups can be loaded and used by a technician in the lab or on location, wherever the testing needs to be
These options can be added to your existing Data Viewer Type 8400 application to enable access to files from our legacy platforms, standard and third-party test formats and FE models. The data is safely transferred to and from the BK Connect platform without risking data loss or corruption, ensuring that