MCS10 Multi-Axis Sensor: Measures 6 Forces and Moments with Accuracy Class 0.1 Guaranteed for Each Channel Up to six forces and torques on three axes (x, y, z) can be measured in combination with the MCS10 multi-axis sensor. This means that the MCS10 is ideally suited for mechanical engineering usage,
WA-L: Inductive Displacement Measurements in a Compact Design; Nominal (Rated) Measuring Range up to 500 mm The technologically sophisticated and proven inductive displacement transducers of the series WA-L with loose plunger feature an inspiring short design (in relation to the measuring range). The compact dimensions of the sensor are the
Special features For connecting T20WN, T21WN, T22 torque transducers Integrated control signal triggering with T20WN 14 ... 30 V DC supply voltage range IP65 degree of protection per EN60529 EMC‐tested per EN61326‐1 through HBM shielding design
TIM-PN and TIM-EC: Digital Measurements In PROFINET And EtherCAT Networks The TIM-PN/EC digital interface module is extremely fast and ideal for highly dynamic applications. It integrates torque and rotational speed measurements in higher-level automation and control systems of test benches. The digital twin-channel amplifier can also be used to transfer
OptiMet-PKF-OTC1 and OptiMet-PKF-OTC2 for outdoor use The OptiMet-PKF is a singlemode optical fiber with high performance ORMOCER® coating with an additional peek layer for ruggedized operation. The coatings ensure optimal strain transmission both to traction and compression directions. It has 13 fiber Bragg gratings equally spaced by 60 cm for multipoint strain
OptiMet-PKF 2 & 4 for outdoor use The OptiMet-PKF is a singlemode optical fiber with high performance ORMOCER® coating with an additional peek layer for ruggedized operation. The coatings ensure optimal strain transmission both to traction and compression directions. It has 2 or 4 fiber Bragg gratings equally spaced by
GN8101B, GN8102B, GN8103B: Input Cards for Ultra-Fast Mechanical and Electrical Signals The GN8101B, GN8102B and GN8103B data acquisition (DAQ) input cards offer eight channels each at a very high speed. With selectable anti-aliasing filtering, high bandwidth, and low-noise input amplifiers with 0.1% error, these cards transform the Genesis HighSpeed series
Strain gauge amplifier – QuantumX MX1615B / MX1616B The strain gauge amplifiers, QuantumX MX1615B and QuantumX MX1616B, are suitable for precise and safe data acquisition of strain gauges in full-bridge, half-bridge and quarter-bridge configuration, as well as for strain gauge based transducers, potentiometers, resistance thermometers (PT100) or normalized voltage (+/-
Maximum Safety at a High Potential The new QuantumX MX809B module provides eight channels for the measurement of temperatures and voltages at a high potential. Every channel supports all customary thermocouples such as type K, J, N, T, E, and many others as well as, in general, voltages in the
Real-Time Bench Automation and Data Analysis Get maximum flexibility in testing and integrate up to 199 sensors to PROFINET IRT simultaneously and in real-time. QuantumX is the ideal choice for quick results; in both basic and fully automated development test benches with small to high channel counts such as component,
Rugged Impulse and Frequency Measurement Module Do you want to measure torque, rotational speed, angle, position, or displacement in harsh environments? If so, the MX460B-R 4-channel, digital impulse and frequency measurement module that comes in a rugged enclosure and features round plugs is the right solution for you. The MX460B-R
Extremely Rugged Measuring Amplifier With Integrated Pressure Sensors The SomatXR MX590B-R measuring amplifier has integrated, low-pressure sensors. Up to five sensors are available per module to enable various pressure measurements (of gases and liquids) to be taken in parallel such as to synchronously acquire the pressure characteristics of exhaust gas
The state of the art in programmable digital panel meters, counters, timers, and serially driven remote displays. Wide choice of signal conditioners for analog and digital inputs. Wide choice of outputs for control, alarm and data communications. Exceptional performance for 5-digit digital panel meters: High speed (60 readings / sec)
The new STT500 rugged sealed tilt sensor is designed to provide reliable, fit-and-forget tilt measurement sensing within an extremely rugged cast aluminum housing, for the most arduous operating environments. The STT500 is suitable for use in applications such as road construction equipment, cranes and booms, scissor lifts, agricultural vehicles, container
The new Penny+Giles model UCM is a low voltage dc powered Universal Conditioning Module designed to operate with a wide range of LVDTs, RVDTs and other analogue inductive transducer types. The set-up is simple and flexible, allowing user adjustment of excitation voltage and frequency, operating mode, span output and zero
The V-Series of conductive single or dual axis inclinometers offers a modern electronic in an environmentally protected and robust aluminium anodized housing. This fully calibrated inclinometer is available with analogue voltage output signals or current output signals. They have a compact study design and a large range of applications are
Measurement Specialties’ XL403A analog accelerometers offer precision measurements over the entire the -40ºC to +85ºC temperature range. Each DC-coupled output is fully scaled, referenced, and temperature compensated. Accuracy is improved by minimizing variations due to temperature and aging effects, and their tough, compact housing holds potted electronics. Choose the number
The PME is the industrial measurement electronics linked to a fieldbus! Flexibility and increasing cost pressures have been an important topic for years when it comes to monitoring of production and assembly processes and the automation of test rigs. This situation forces companies involved in plant and equipment construction to
The SCM100 LVDT signal conditioning module has been designed specifically to operate with the AF111 and AF145 range of LVDTs, and to make using an LVDT as simple as using a linear potentiometer. This module incorporates a high performance circuit which drives the LVDT in a ratiometric configuration, thereby maximizing
Versatile signal conditioner featuring user selectable outputs of +/-10V, +/-5V, 0-10V, 0-5V, 0-20mA and 4-20ma. DC or AC powered with switch selectable filters from 1 to 5kHz and a sealed ABS enclosure. Supports shunt calibration and a wide range of gain settings. Features: * User selectable analog output ±10V, ±5V,