Shaft Torque Sensor T210: Measurement of Rotating Torque up to 200 N·m The torque transducer T210 features a precise measuring system which transmits the measurement values as well as the supply energy in a contactless way from the rotor to the stator. Additionally, the rotational speed and the angle of
Force: 11.2K to 180K lbf Torque: 88.5K to 354K lb-in Force: 50K to 800K N Torque: 10K to 40K Nm Interface’s 6-axis high capacity load cell measures forces simultaneously in three mutually perpendicular axes and three simultaneous torques about those same axes. 12 full bridges provide mV/V output on 12
ARAMIS 3D Camera Systems Robust design for high-end applications For 3D Analyses Without Compromise ARAMIS SRX is a high-resolution 3D camera system for full-field and point-based measurements. Up to 2000 frames per second, combined with high stability, process reliability and usability make ARAMIS SRX an ideal measuring system for high-end
ARAMIS Adjustable The modular measuring system for 2D and 3D analyses Grows with your requirements The modularly expandable ARAMIS Adjustable camera system is a cost-effective entry point into the world of GOM metrology. It provides precise 2D and 3D coordinates for the analysis of statically or dynamically strained components and
The WK 6000 power measurement station modules have a bidirectional RS485 MODBUS digital link allowing to configure and control the power measurement station and to retrieve all the measurements in digital. This digital link is available on the connector block. The various JM Concept digital interfaces allows communication with Modbus
220 lbf to 440.9K lbf ( 100 kg to 200 MT ) The WSSCLC-MOUNT is a complete weighing assembly for use with the WSSCLC range of load cells (see separate data sheet). The weighing assembly facilitates easy mounting for the engineer on site, and incorporates a number of key features
220 lbf to 440.9K lbf ( 100 kg to 200 MT ) The WSSCLC series of load cells has been designed for a wide range of force measurement and weighing applications where space is limited. The WSSCLC is constructed from stainless steel and has a fully welded construction, offering a
Sensor to USB Output Converter The interface module SI-USB4 is connected between sensor and PC. In this way, analog sensor signals will be digitized with up to 16 bit resolution. By the measuring rate of 5000 measurements/s per measuring channel, high-dynamic measurements can be achieved. The measured values are transferred
Model VSC is powered by 9-36V supply and provides ±5V output, high accuracy precision in a small IP67 enclosure. This product features 0.005 Nonlinearity. High accuracy precision bi-polar differential amplifier +/-5VDC Output Accepts inputs from 1mV/V to 4.5 mV/V 50 Hz bandwidth Internal shunt calibration resistor Compact size Specifications
Teledyne Hastings - Vacuum Measurement and Control - PRODUCT GUIDE
Teledyne Hastings - Thermal Mass Flow - PRODUCT GUIDE
Teledyne Hastings Thermocouple Gauge Tubes/Sensors are precision sensing devices designed to provide accurate measurement and control of vacuum. Fully compensated for both temperature and rate of temperature change, the tubes are renowned worldwide for their dependability, and boast a history of success that has endured for over 60 years. THI
The galvanic separator JK 2000, self-powered loop isolator, allows to solve the problems of common points for complex measurement circuits and to reduce the spread of interferences. This range of isolators comes in a small footprint case which can be snapped into the symmetrical or asymmetrical DIN rail. We have
JK 0030A1 is a powered loop isolator specially designed to isolate 0...4... 20mA. JK 0030A1 is guaranteed for 5 years !
The JK1000A4 Isolated Sensor Power Supply is designed to provide a simple and economical solution to all 2-wire sensor power supply problems. With 4 isolated power supply channels in groups of 2, it allows to isolate each loop separately and, thanks to its current limitation, to protect the sensor in
ULCOS 600 is a converter for alternating current or voltage input with the possibility of having 1 or 2 analog outputs and 2 relay outputs. ULCOS 600 is guaranteed for 10 years !
These analog converters 0...4... 20mA – 0...4... 20mA are available in 2 ranges: EOLIS 0030A2 is a double isolator: each independent and isolated channel has an input 0... 4... 20mA with sensor power supply and a current output 0... 4... 20mA EOLIS 0030A2- F is a double isolator: each independent
ULCOS 820F2 is a frequency converter, coupled with a sensor power supply, with 2 analog outputs and 2 relays. ULCOS is guaranteed for 10 years !
TELIS 6000 is a digital converter with alternating current or alternating voltage input. Two input calibrations are possible: 0 to 5A and 0 to 1A, from 45Hz to 65Hz TELIS 6000 is guaranteed for 5 years
TELIS 8000 is a frequency input transmitter offering 1 current and/or voltage output with 1 to 4 relay outputs. TELIS 8000 is guaranteed for 5 years
JK 6010A1 is an analog converter for alternating current input. Two input calibrations are possible: 0 to 5A and 0 to 1A, from 45Hz to 65Hz. The JL6010A1 converters use the JM Concept universal power supply: 20Vdc - 240Vdc; 80Vac - 256Vac 50-60Hz. JK 6010A1 is guaranteed for 5 years