Teledyne Hastings - Vacuum Measurement and Control - PRODUCT GUIDE
Teledyne Hastings - Thermal Mass Flow - PRODUCT GUIDE
Teledyne Hastings Thermocouple Gauge Tubes/Sensors are precision sensing devices designed to provide accurate measurement and control of vacuum. Fully compensated for both temperature and rate of temperature change, the tubes are renowned worldwide for their dependability, and boast a history of success that has endured for over 60 years. THI
Optional Touch Screen Display, Wide Range, Flexible Vacuum Control! The HVG-2020B wide range, dual sensor vacuum gauge takes measurement to the next level. With a Piezo based sensor and a thermal based Pirani sensor accurately and confidently measure pressures across seven decades. The Piezo sensor is media isolated, gas composition
The galvanic separator JK 2000, self-powered loop isolator, allows to solve the problems of common points for complex measurement circuits and to reduce the spread of interferences. This range of isolators comes in a small footprint case which can be snapped into the symmetrical or asymmetrical DIN rail. We have
JK 0030A1 is a powered loop isolator specially designed to isolate 0...4... 20mA. JK 0030A1 is guaranteed for 5 years !
The JK1000A4 Isolated Sensor Power Supply is designed to provide a simple and economical solution to all 2-wire sensor power supply problems. With 4 isolated power supply channels in groups of 2, it allows to isolate each loop separately and, thanks to its current limitation, to protect the sensor in
ULCOS 600 is a converter for alternating current or voltage input with the possibility of having 1 or 2 analog outputs and 2 relay outputs. ULCOS 600 is guaranteed for 10 years !
These analog converters 0...4... 20mA – 0...4... 20mA are available in 2 ranges: EOLIS 0030A2 is a double isolator: each independent and isolated channel has an input 0... 4... 20mA with sensor power supply and a current output 0... 4... 20mA EOLIS 0030A2- F is a double isolator: each independent
ULCOS 820F2 is a frequency converter, coupled with a sensor power supply, with 2 analog outputs and 2 relays. ULCOS is guaranteed for 10 years !
TELIS 6000 is a digital converter with alternating current or alternating voltage input. Two input calibrations are possible: 0 to 5A and 0 to 1A, from 45Hz to 65Hz TELIS 6000 is guaranteed for 5 years
TELIS 8000 is a frequency input transmitter offering 1 current and/or voltage output with 1 to 4 relay outputs. TELIS 8000 is guaranteed for 5 years
JK 6010A1 is an analog converter for alternating current input. Two input calibrations are possible: 0 to 5A and 0 to 1A, from 45Hz to 65Hz. The JL6010A1 converters use the JM Concept universal power supply: 20Vdc - 240Vdc; 80Vac - 256Vac 50-60Hz. JK 6010A1 is guaranteed for 5 years
ULCOS 900 is a universal converter: direct current, DC voltage, variable resistance probe, thermocouple, potentiometer, 2-wire resistor, special table for NTC / PTC, lined with a sensor power supply, and with 1 or 2 analog outputs and 2 relays. 2500Vrms to 4200Vrms isolation ! ULCOS 900 is guaranteed for 10
PLC redundancy must be considered in two scenarios: Interfacing of two PLCs to one actuator Interfacing of a sensor to two PLCs The GK3000D1 converters are particularly designed with their 2 analog inputs and their 2 discrete inputs, to solve redundancy problems. GK 3000D1 is guaranteed for 5 years
The DUAL CHANNEL, INDEPENDENTLY ISOLATED design of EOLIS 3000 allows the realization of two converters in a 22.5mm case. EOLIS 3000 is a converter of process inputs (0-20 mA; 4 -20 mA, 0-100mv - 0-1V; 0-10V) or of resistive inputs or PT100 2 wires, 2 analog outputs and up to
The JK 3000 series allows the isolation and conditioning of analog signals. Single Process Input: (0-20mA, 4-20mA, 0-100mV, 0-10V, +/-10V, other values on request up to 1000V). Single or Dual Output of (0-20mA, 4-20mA, 0-10V); +/-10V available only on output 2. With the lightning shock protection option, the converter protects
In order to respond to the problems of isolation and transmission of a potentiometric signal, JM concept has developed 2 analog converters with potentiometer input. Analog technology allows signal processing with a response time of less than ms. The use of high performance components in a wide temperature range guarantees
TELIS 1000 is a converter from the TELIS range dedicated to measurements with a gauge bridge, coupled with a sensor power supply, a digital input, one or 2 analog outputs and up to 2 relays and an RS485 communication port Modbus RTU. TELIS 1000 is an isolated converter (quadruple galvanic
TELIS 9000 is a universal converter for Current (direct), Voltage, (direct), Variable resistance probe, Thermocouple, Potentiometer, 2-wire resistance, Special table for NTC PTC) coupled with a sensor supply for each input, one or 2 isolated analog outputs and up to 4 relays and an RS485 Modbus RTU communication port. TELIS
JM Concept has developed an interfacing system to decentralize the analog inputs and outputs and to send the data back via fieldbus. The principle is based on JM Concept's analog signal processing and isolation technology. The system is fully modular and scalable. The inputs can be process inputs as well as