A Division of the Hoskin Group, Canada's Instrumentation Leader
Precision Measurement for Defense & Military Applications
Military applications for sensor technology include the development of transportation systems (eg. tanks and aircraft), weaponry and communication and monitoring systems.
Precision Measurement for Defense & Military Applications Products:
Precision Measurement for Defense & Military Applications
Type 3676 4 Ch. Input Module – LAN-XI Light
LAN-XI Light is a tough data acquisition module that captures time data from up to four channels, and is ideally suited for use with BK Connect Applets, specific tools for specific tasks. This module can be used together with a battery module to create a portable, remote recorder. USE SCENARIOS Any
Type 3161 1 Channel Input + 1 Channel Output Module, 204.8 kHz
LAN-XI Module Type 3161 is specifically designed for high-frequency applications such as transducer calibration and underwater defence applications. The module offers a combination of one input channel and one generator output channel. Both input and output channels have a frequency range of DC to 204.8 kHz. USE SCENARIOS High-frequency sound
Type 3160 Generator Module
A combination of inputs and generator outputs make a complete stand-alone analyzer test system. The module is ideal for applications where system excitation is required - such as audio and electro-acoustic test applications. Type 3160 comes in two basic variants, offering the choice between 2 inputs/2 outputs and 4 inputs/2 outputs. All input and output channels
Type 3058 LAN‐XI CAN Bus Module
CAN Bus Module Type 3058 is a low‐noise data acquisition unit designed specifically for automotive applications where there is a need to record vehicle parameters along with the measurement signals of interest. Combined with LAN‐XI Battery Type 2831‐A and the WLAN Frame Type 3660‐A, Type 3058 creates a true, wireless
Type 3057 3 Ch. Input Bridge Module 102.4 kHz
This LAN-XI module Type 3057 is specifically aimed at high-frequency applications with bridge type transducers. Bridge module Type 3057-B-030 is a three-channel 102.4 kHz LAN-XI module intended primarily for dynamic bridge measurements using PULSE Reflex™, piezoresistive and variable-capacitance accelerometors and pressure sensors. USE SCENARIOS High-frequency sound and vibration measurements High-energy impact
Type 3056 4-Ch. Input/HS-Tacho+ 8-Ch. Aux. Module
Auxiliary input module Type 3056-A-040 is aimed at applications where you need to monitor low-frequency voltage signals along with the sound and vibration signals. The module offers a combination of four 51.2 kHz input channels with eight simultaneously sampled low-frequency auxiliary channels. Unique to Type 3056 is the support of high-speed
Type 3053 High-Density 12-Channel Input Module
A 12-channel input module that delivers a compact and cost-efficient solution for high channel count applications. USE SCENARIOS High channel count sound and vibration measurements Measurement front-end module for PULSE measurement and analysis software Front-end for PC based data recorder Type 7708 Single module measurements Multi module measurement/ distributed system Stand-alone recording
Type 3052 High-Frequency 3-Channel Input Module
Type 3052 has three input channels with a frequency range from DC to 102.4 kHz. Combined with a dynamic range of 160 dB, this ensures that demanding measurement needs can be met, while interchangeable front panels give the flexibility to use a wide range of transducers. USE SCENARIOS High-frequency sound and vibration measurements Measurement
Type 3050 Multi-Purpose 4- And 6-Channel Input Modules
The core of the LAN-XI range, these modules are designed to cover as many sound and vibration measurement applications as possible. USE SCENARIOS General sound and vibration measurements Measurement front-end module for PULSE measurement and analysis software Front-end for PC-based data recorder Type 7708 Single-module measurements Multi-module measurements/distributed system Stand-alone recording
Type 2831 Battery Module
A rechargeable Li-Ion battery that can power a single LAN-XI module or fit into a module frame. Featuring the same dimensions as all LAN-XI modules, this battery module can quickly attach to any standard analyzer module, or slot into a frame. USE SCENARIOS Field use Powers a frame or individual LAN-XI modules
Impulse Noise Evaluation System Based On Type 7963
Impulse Noise Evaluation for Gun Noise This solution is a complete, focused kit for acquiring accurate noise measurements for assorted combinations of small arms, suppressors and ammunition types. The system components have been selected to ensure a quick and easy setup, simultaneously acquire the right data the first time, and
Type 9712-W-FEN BK Connect Acoustic Camera
This complete kit uses a hand-held microphone array to identify sound sources by creating noise maps in real-time – over a wide frequency range. The portable array is normally fitted with a tablet computer that shows you the real-time sound map of the area at which you are pointing. It
Type 3663 Sonoscout – Ipad-Based Data Recorder
Sonoscout is a system that uses an app on an iPad® to control a wireless data acquisition unit. This rugged front end can connect up to 12 transducers, such as a binaural headset for in-vehicle recording at the user’s ear positions, or two independent CAN bus inputs and up to eight
PHOTON+ Dynamic Signal Analyzer
PHOTON+ is a versatile analyzer for sound and vibration measurements, recording, and signal post-processing. It consists of a small data acquisition hardware unit and PC software. It is quick to setup, and gives instant data verification on site, by processing results immediately. The user can switch between real-time measurements, recording
BZ-7848-A LAN-XI Notar – Stand-Alone Recorder
LAN-XI Notar is a tough recorder that captures time data from up to 12 channels of sound and vibration data. This system uses firmware installed on one module of our LAN-XI front-end hardware, which gives a choice of input channels, dynamic ranges, and connector types. The acquisition module is usually
Type 8490-B BK Connect Order Analysis Applet
BK Connect Order Analysis Applet is a dedicated tool for making order analysis on sound and vibration data, detecting patterns caused by inherent instabilities and imbalances in rotating or reciprocating machines. The software analyses raw time signals that have been recorded using two different styles of analysis in predefined set-ups.
Type 8490-A BK Connect FFT Analysis Applet
BK Connect FFT Analysis Applet is a dedicated tool for making standard fast Fourier transform (FFT) analysis. Measurement and analysis can be performed using three different predefined set-ups based on standard BK Connect processing tasks for adjusting process properties and executing the predefined process chains. USE SCENARIOS On-site vibration troubleshooting
Type 8493 BK Connect Acoustic Camera Applet
BK Connect Acoustic Camera Applet is designed to provide a simple measure-and-record solution that acquires data for noise source location applications and creates sound maps of sound intensity and sound pressure overlain with a synchronous video. The applet comprises all the software functionality needed for noise mapping and NSI in
Type 8490-C BK Connect FFT, CPB And Overall Analysis Applet
BK Connect FFT, CPB and Overall Applet is designed for stationary and non-stationary testing that requires standard sound and vibration measurements using FFT, CPB and overall analysis. Like all BK Connect applets, it is a stand-alone tool that contains all the functionality needed to acquire data, perform analysis and create
Type 8490-D BK Connect Loudness And Overall Analysis Applet
BK Connect Loudness and Overall Analysis Applet is a dedicated tool for analysing sound quality (SQ) metrics. The applet calculates loudness and performs overall analysis for stationary and non-stationary signals according to ISO 532-1:2017. The applet contains all of the software tools required for performing general sound data acquisition analysis
Type 8491-A BK Connect Hammer Impact Applet
BK Connect Hammer Impact Applet is a dedicated tool for characterizing structural properties such as resonances in troubleshooting, benchmarking, design verification, quality control or material testing scenarios using roving or fixed hammer impact testing. Acquired FRFs can also be exported to BK Connect Modal Analysis Types 8420 and 8420-A for a complete modal