A Division of the Hoskin Group, Canada's Instrumentation Leader
Optimizing Energy Production With Reliable Sensor Data
Electricity generation is the process of creating electricity from other forms of energy. Sensor technology is utilized in the production of energy by such techniques as hydro-electric, nuclear, fossil fuels, solar and wind generation. Research and development in power generation is also a key market.
Optimizing Energy Production With Reliable Sensor Data Products:
Optimizing Energy Production With Reliable Sensor Data
LDS V8900 High-Force Shaker
The LDS® V8900 high-force shaker has been designed to offer unmatched versatility and testing capability. Combining high forces, large displacement, a wide frequency range and up to 3 kN·m (2212 lb·ft) of overturning moment, it is suitable for testing challenging or unbalanced payloads and small payloads alike. It is suitable for
Impulse Noise Evaluation System Based On Type 7963
Impulse Noise Evaluation for Gun Noise This solution is a complete, focused kit for acquiring accurate noise measurements for assorted combinations of small arms, suppressors and ammunition types. The system components have been selected to ensure a quick and easy setup, simultaneously acquire the right data the first time, and
Type 9712-W-FEN BK Connect Acoustic Camera
This complete kit uses a hand-held microphone array to identify sound sources by creating noise maps in real-time – over a wide frequency range. The portable array is normally fitted with a tablet computer that shows you the real-time sound map of the area at which you are pointing. It
Type 3663 Sonoscout – Ipad-Based Data Recorder
Sonoscout is a system that uses an app on an iPad® to control a wireless data acquisition unit. This rugged front end can connect up to 12 transducers, such as a binaural headset for in-vehicle recording at the user’s ear positions, or two independent CAN bus inputs and up to eight
PHOTON+ Dynamic Signal Analyzer
PHOTON+ is a versatile analyzer for sound and vibration measurements, recording, and signal post-processing. It consists of a small data acquisition hardware unit and PC software. It is quick to setup, and gives instant data verification on site, by processing results immediately. The user can switch between real-time measurements, recording
BZ-7848-A LAN-XI Notar – Stand-Alone Recorder
LAN-XI Notar is a tough recorder that captures time data from up to 12 channels of sound and vibration data. This system uses firmware installed on one module of our LAN-XI front-end hardware, which gives a choice of input channels, dynamic ranges, and connector types. The acquisition module is usually
Type 8490-B BK Connect Order Analysis Applet
BK Connect Order Analysis Applet is a dedicated tool for making order analysis on sound and vibration data, detecting patterns caused by inherent instabilities and imbalances in rotating or reciprocating machines. The software analyses raw time signals that have been recorded using two different styles of analysis in predefined set-ups.
Type 8490-A BK Connect FFT Analysis Applet
BK Connect FFT Analysis Applet is a dedicated tool for making standard fast Fourier transform (FFT) analysis. Measurement and analysis can be performed using three different predefined set-ups based on standard BK Connect processing tasks for adjusting process properties and executing the predefined process chains. USE SCENARIOS On-site vibration troubleshooting
Type 8493 BK Connect Acoustic Camera Applet
BK Connect Acoustic Camera Applet is designed to provide a simple measure-and-record solution that acquires data for noise source location applications and creates sound maps of sound intensity and sound pressure overlain with a synchronous video. The applet comprises all the software functionality needed for noise mapping and NSI in
Type 8490-C BK Connect FFT, CPB And Overall Analysis Applet
BK Connect FFT, CPB and Overall Applet is designed for stationary and non-stationary testing that requires standard sound and vibration measurements using FFT, CPB and overall analysis. Like all BK Connect applets, it is a stand-alone tool that contains all the functionality needed to acquire data, perform analysis and create
Type 8490-D BK Connect Loudness And Overall Analysis Applet
BK Connect Loudness and Overall Analysis Applet is a dedicated tool for analysing sound quality (SQ) metrics. The applet calculates loudness and performs overall analysis for stationary and non-stationary signals according to ISO 532-1:2017. The applet contains all of the software tools required for performing general sound data acquisition analysis
Type 8491-A BK Connect Hammer Impact Applet
BK Connect Hammer Impact Applet is a dedicated tool for characterizing structural properties such as resonances in troubleshooting, benchmarking, design verification, quality control or material testing scenarios using roving or fixed hammer impact testing. Acquired FRFs can also be exported to BK Connect Modal Analysis Types 8420 and 8420-A for a complete modal
Type 8440 (Replaces Type 8740) BK Connect Angle Domain Analysis
This application takes recorded time data and resamples it so that it can be presented as a function of the rotation angle during the duty cycle of rotating machines, such as car engines. By relating sound and vibration data to the angle of the engine’s crankshaft or flywheel, it is
Type 8405-G (Replaces Types 8710, 7698 And BZ-5265) BK Connect Sound Quality Metrics
This BK Connect option analyses product sound quality using parameters that closely relate to the complete human experience of the sound, rather than using purely physical quantities such as sound pressure. The software can analyze recorded measurements using sound quality metrics such as ‘loudness’. Users can filter the sound using
Type 8405-F (Replaces Types 8705 And 7702, And BZ-5277) BK Connect Order Tracking
This BK Connect option performs order analysis on sound and vibration signals, detecting sound and vibration patterns that are caused by inherent instabilities and imbalances in reciprocating or rotating machines. By relating the sound and vibration data to revolutions of moving parts, this software improves the engineer’s ability to find
Type 8405-E (Replaces Types 8704 And 7702, And BZ-5277 BK Connect Order Analysis Software
This BK Connect option performs order analysis on sound and vibration signals, detecting sound and vibration patterns that are caused by inherent instabilities and imbalances in rotating or reciprocating machines. The software analyses raw time signals that have been recorded from transducers via data acquisition hardware and a PC computer.
Type 8405-D (Replaces Type 8703) BK Connect Calculation
Adding the BK Connect Calculation option to BK Connect Data Processing Type 8403 or BK Connect Data Processing Specialist Type 8404 adds advanced calculation options, while performing fast Fourier transformation (FFT) and overall level analysis. The calculation elements for the process chain are function statistics function operators scaling with unit conversion frequency weighting complex
Type 8405-C (Replaces Types 8706 And 7771) BK Connect CPB
This BK Connect application performs 1/n-octave - or constant percentage bandwidth (CPB) - analysis. Data can be acquired from just one and up to hundreds of channels connected via data acquisition hardware to a PC, which records the signals. This software analyses the time data as it is replayed. It can
Type 8405-B (Replaces Type 7773) BK Connect Advanced Frequency Option
This BK Connect option adds time correlation, amplitude demodulation – or envelope analysis – and infinite impulse response (IIR) filter to BK Connect Data Processing Type 8403 or BK Connect Data Processing Specialist Type 8404 for analysis of the vibration produced by a machine. The purpose is to find changes in the vibration pattern or
Type 8404 (Replaces Types 7700, 7770 And 8702) BK Connect Data Processing Specialist
BK Connect Data Processing Specialist Type 8404 enables specialists to create process chains and analyze data immediately or save those chains as templates. Test engineers and operators (using the Type 8403 license) can quickly and easily make live measurements or load recorded data for post-processing using the pre-defined process chains. Specialists can
Type 8403 BK Connect Data Processing
BK Connect Data Processing Type 8403 focuses on the operator’s and test engineer’s role, knowing that their use of the data acquisition and analysis software differs from the sound and vibration (S&V) specialist. Operators require the ability to quickly and easily load recorded data for post-processing or perform real-time analysis using