The UA-2100 family is the default front panel on 4/6 ch. Input Modules Type 3050, 3-ch. Input Module Type 3052 and Generator, 2/2-ch. Input/Output Module Type 3160-A-022. Industry standard BNC connectors allow easy connection for direct voltage, generator output, CCLD accelerometers, charge accelerometers (using charge adaptor), CCLD microphones, and CCLD
The LAN-XI frame Type 3660-D provides a practical solution for test setups where up to 11 LAN-XI modules are required. The multi module LAN-XI docking station provides both power and connectivity as well as a rugged protection for the LAN-XI modules. USE SCENARIOS Large high-density channel systems Modal analysis Field and lab
The LAN-XI frame Type 3660-C provides a practical solution for test setups where up to 5 LAN-XI modules are required. The multi module LAN-XI docking station provides both power and connectivity as well as a rugged protection for the LAN-XI modules. USE SCENARIOS Large high-density channel systems Modal analysis Field and lab use
LAN-XI Light is a tough data acquisition module that captures time data from up to four channels, and is ideally suited for use with BK Connect Applets, specific tools for specific tasks. This module can be used together with a battery module to create a portable, remote recorder. USE SCENARIOS Any
LAN-XI Module Type 3161 is specifically designed for high-frequency applications such as transducer calibration and underwater defence applications. The module offers a combination of one input channel and one generator output channel. Both input and output channels have a frequency range of DC to 204.8 kHz. USE SCENARIOS High-frequency sound
A combination of inputs and generator outputs make a complete stand-alone analyzer test system. The module is ideal for applications where system excitation is required - such as audio and electro-acoustic test applications. Type 3160 comes in two basic variants, offering the choice between 2 inputs/2 outputs and 4 inputs/2 outputs. All input and output channels
CAN Bus Module Type 3058 is a low‐noise data acquisition unit designed specifically for automotive applications where there is a need to record vehicle parameters along with the measurement signals of interest. Combined with LAN‐XI Battery Type 2831‐A and the WLAN Frame Type 3660‐A, Type 3058 creates a true, wireless
This LAN-XI module Type 3057 is specifically aimed at high-frequency applications with bridge type transducers. Bridge module Type 3057-B-030 is a three-channel 102.4 kHz LAN-XI module intended primarily for dynamic bridge measurements using PULSE Reflex™, piezoresistive and variable-capacitance accelerometors and pressure sensors. USE SCENARIOS High-frequency sound and vibration measurements High-energy impact
Auxiliary input module Type 3056-A-040 is aimed at applications where you need to monitor low-frequency voltage signals along with the sound and vibration signals. The module offers a combination of four 51.2 kHz input channels with eight simultaneously sampled low-frequency auxiliary channels. Unique to Type 3056 is the support of high-speed
A 12-channel input module that delivers a compact and cost-efficient solution for high channel count applications. USE SCENARIOS High channel count sound and vibration measurements Measurement front-end module for PULSE measurement and analysis software Front-end for PC based data recorder Type 7708 Single module measurements Multi module measurement/ distributed system Stand-alone recording
Type 3052 has three input channels with a frequency range from DC to 102.4 kHz. Combined with a dynamic range of 160 dB, this ensures that demanding measurement needs can be met, while interchangeable front panels give the flexibility to use a wide range of transducers. USE SCENARIOS High-frequency sound and vibration measurements Measurement
The core of the LAN-XI range, these modules are designed to cover as many sound and vibration measurement applications as possible. USE SCENARIOS General sound and vibration measurements Measurement front-end module for PULSE measurement and analysis software Front-end for PC-based data recorder Type 7708 Single-module measurements Multi-module measurements/distributed system Stand-alone recording
A rechargeable Li-Ion battery that can power a single LAN-XI module or fit into a module frame. Featuring the same dimensions as all LAN-XI modules, this battery module can quickly attach to any standard analyzer module, or slot into a frame. USE SCENARIOS Field use Powers a frame or individual LAN-XI modules
This shaker has been used in durability and reliability tests of some of the most sophisticated products and applications, such as telecommunication and satellite systems, combined space simulation gear, electronic assemblies, and mechanical components for commercial and defence aircraft. Powerful and sturdy, LDS® V984 is built for high-frequency, high-force vibration and
This shaker is used to test reliability and durability of some of the world’s most complex products and applications, including avionics instrumentation, defence electronics and telecommunications assemblies. LDS® V964 is designed to accommodate outsize articles for high-frequency vibration and high-shock force testing, whether in single- or multi-shaker configurations. USE SCENARIOS Three-axis
The largest and most powerful shaker in the LDS® range, V994 is used for durability and reliability testing of some of the world’s most complex products and applications, including avionics, telecommunication and satellite systems, military instrumentation, and commercial aircraft components. Built for high-frequency, high-force vibration and shock testing, it can be
The LDS® V8900 high-force shaker has been designed to offer unmatched versatility and testing capability. Combining high forces, large displacement, a wide frequency range and up to 3 kN·m (2212 lb·ft) of overturning moment, it is suitable for testing challenging or unbalanced payloads and small payloads alike. It is suitable for
Impulse Noise Evaluation for Gun Noise This solution is a complete, focused kit for acquiring accurate noise measurements for assorted combinations of small arms, suppressors and ammunition types. The system components have been selected to ensure a quick and easy setup, simultaneously acquire the right data the first time, and
This complete kit uses a hand-held microphone array to identify sound sources by creating noise maps in real-time – over a wide frequency range. The portable array is normally fitted with a tablet computer that shows you the real-time sound map of the area at which you are pointing. It
Sonoscout is a system that uses an app on an iPad® to control a wireless data acquisition unit. This rugged front end can connect up to 12 transducers, such as a binaural headset for in-vehicle recording at the user’s ear positions, or two independent CAN bus inputs and up to eight
PHOTON+ is a versatile analyzer for sound and vibration measurements, recording, and signal post-processing. It consists of a small data acquisition hardware unit and PC software. It is quick to setup, and gives instant data verification on site, by processing results immediately. The user can switch between real-time measurements, recording