Food & Pharmaceuticals
The food and pharmaceutical industries develop, produce, and market either food or drugs (licensed for use as medications). System controls and automation and implemented to improve product quality control and manufacturing throughput.
Food & Pharmaceuticals Products:
Food & Pharmaceuticals
INF1 – RS485 – Single Sensor Weight Transmitter
The Interface INF1-RS485 Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES Baud rate: 2400, 4800, 9600, 19200, 38400, 115200 (bit/s) RS485 serial port for communication via
INF1 – Analog – Single Sensor Weight Transmitter
The Interface INF1-Analog Single Sensor Weight Transmitter and Indicator with six-digit red LED display (8 mm height). Space saving compact design. Four buttons for the system calibration. Six indicator led. Dimensions: 25 x 115 x 120 mm. FEATURES 16-bit Analog output: 0-20mA, 4-20mA, 0-5V, 0-10V, +/-5V, +/-10V RS485 port
9325 Hand Held Digital Indicator – COMING SOON !
Portable, Digital, Hand Held, Battery & USB Powered, TEDS Ready The 9325 allows simple display of strain bridge based measurements such as load cells, torque transducers, and other mV/V output transducers with sensitivity up to +/-1 V/V. Up to six calibration ranges are available allowing for different loading modes (tension
2161 High Capacity Column Load Cell – Compression Only
Typically used in higher force applications Capacities from 300K to 1000K (1335 to 4450 kN) Performance to ±0.15% FS Compact size Metric and English models Screw in Handles Options Available for 2nd Bridge
Acuity Laser Touch Panel Display
The Acuity™ 7” Touch Panel Display is a stand-alone industrial PC interface for use with Acuity laser distance sensors. These fully enclosed units replace panel meters, alphanumeric displays and analog controllers by providing a modern interface through a full-color LCD and touch screen. The Touch Panel Display communicates with one
AR550 High Speed Laser Position Sensor
The AR550 high speed laser sensor is Acuity’s fastest triangulation device for dimensional and distance measurement. At sampling rates up to 70kHz, these sensors are typically used for applications that demand high speed such as vibration measurements, scanning of roads, vehicle crash test, and ballistic measurements. Industry Leading Speed
SomatXR CX27C-R Ultra-Ruggedized Gateway Interface
SomatXR CX27C-R: Parallel Data Analysis and Automation via EtherCAT® and PROFINET IRT The SomatXR CX27C-R Industrial Ethernet gateway enables the integration of up to 199 signals from up to 24 SomatXR modules into a measurement chain, which can also be simultaneously acquired in real time. It is, therefore, perfectly suitable
MONI LOG® MicroShockDetector_PLUS
Compact, light-weight shock data logger Registers the 200 largest shock events in the X, Y, Z direction Saves up to 10 curve progressions of the largest shocks Intelligent signal filtering and evaluation Indicates limit value overruns with alarm LED Continuous recording of temperature, humidity, air pressure, light Intuitive operation, extremely
DMH Series – High-Performance Digital MEMS Inclinometer
The Jewell Instruments model DMH is a high precision MEMS inclinometer. Units are available with RS232, RS422, RS485 and UART TTL options. All DMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request. FEATURES • Single-Axis and Dual-Axis
AMS Series – Mid-Level MEMS Inclinometer
The Jewell Instruments model AMS is a mid-level performance analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up to 1m. Custom ranges and output types are also available on request. FEATURES •
AMH Series – High Precision MEMS Inclinometer
The Jewell Instruments model AMH is a high precision MEMS inclinometer. Standard units are available with 0-5V, 0.5-4.5V, or 4-20mA output options. All AMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request. FEATURES • Single-Axis and Dual-Axis
AMI Series – MEMS Inclinometer – Temp Corrected
The model AMI is a high precision MEMS inclinometer with built-in thermal compensation. Standard units come with 0-5V, 0.5-4.5V or 4-20mA output options. All AMI series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request. FEATURES • Single-Axis and
AML Series – MEMS Inclinometer
The Jewell Instruments model AML is a low cost analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up to 1m. Custom ranges and output types are also available on request. FEATURES •
JMI-L Series MEMS Inclinometer
The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. 4-20mA output version With a lightweight aluminum enclosure, the JMI is conducive to many OEM applications and with an
JMA-165-RH Series MEMS Accelerometer – Heater Version – CENELEC / AREMA
The Jewell Instruments JMA-165 MEMS accelerometers are a cost effective and viable alternative to traditional force balance designs. This mighty little sensor is CENELEC, AREMA certified, and RoHS compliant. With options for heated or non-heated, and available filtering, you can customize the perfect sensor for your application. FEATURES ±0.5JMA-165-R Series MEMS Accelerometer – Non-Heater Version – CENELEC / AREMA
The Jewell Instruments JMA-165 MEMS accelerometers are a cost effective and viable alternative to traditional force balance designs. This mighty little sensor is CENELEC, AREMA certified, and RoHS compliant. With options for heated or non-heated, and available filtering, you can customize the perfect sensor for your application. FEATURES ±0.5
AMA Series MEMS Accelerometer
Jewell Instruments AMA Series Accelerometers are an excellent choice for cost to performance trade off. The AMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability. Analog output. FEATURES Single, Dual and Triaxial Configuration Excellent long term stability Ruggedized for harsh
DMA Series Digital MEMS Accelerometer
Jewell Instruments DMA Series Accelerometers are an excellent choice for cost to performance trade off. The DMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability. RS232 / RS485 TTL UART FEATURES Single, Dual and Triaxial Configuration Digital Communications Excellent long
TE 7101A IEPE Accelerometer
The Model 7101A is a miniature, high performance IEPE accelerometer available in ±50g to ±1000g dynamic ranges. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >10kHz utilizing stable piezo-ceramic crystals in annular shear mode. The model 7101A features a hermetically sealed
9870 High Performance Digital Indicator with TEDS
High Performance Color Graphic LCD Screen TEDS Plug and Play Sampling and Response Time from 4,000 to 20,000 per second TEDS Read and Write Nonlinearity 0.01% Full Scale 24 Bit A/D Converter Remote Sense Function Variety of Hold Functions Scalable Analog Output (0-5 VDC, ±5 VDC, 0-10 VDC, ±10VDC, 4-20mA