TE Connectivity

The LiM 4-20 is low cost LVDT transmitter module designed to provide good performance at a cost suitable for OEM applications. Connection to the LiM 4-20 may be done utilizing the screw terminal barrier strip or optional card edge connector. Dip...

The LM Series incorporates stainless steel and plastic isolation suitable for level sensing in water, other liquid and gas. The LM series uses a patent pending low cost stainless steel sensor in a PVC plastic fitting. The modular design is adaptable...

LT 5 & 7 Pressure Transducers are non-submersible hydrostatic pressure transducers specifically designed for demanding industrial applications where the primary criteria are reliability and...

The LTR Level Transducer is a ruggedized submersible hydrostatic level transducer specifically designed to meet the rigorous environments encountered in wastewater and liquid level measurements and...

The popular LVM-110, low cost LVDT / RVDT signal conditioner has been re-engineered to improve performance and versatility. The new LVM has increased LVDT drive current capability, to expand compatibility to LVDTs with lower input impedances. The...

Because of quantum improvements in coil winding technology, Measurement Specialties is able to offer premium LVDT performance at standard LVDT pricing with our M-12 Series LVDT. The M-12 Series LVDT is wound on a ribless bobbin providing the smooth...

Introducing the world’s smallest stringpot. The M150 is smaller than a thumbprint and occupies a tiny space of only .74 x .74 x .38 inches. With a full stroke measurement range of 1.5 inches, the M150 has been designed for many aerospace and...

The modular M5600 wireless pressure transducer from our Microfused line is enclosed in a stainless steel and polycarbonate housing. This 24-bit ADC digital output wireless transducer eliminates hard wiring and provides remote process control and...

M905-PANEL CONDITION DEVICE WITH...

Piezo film is available in a variety of different film sizes and thicknesses. These can be fabricated into simple transducers, or for use as full size sheets for applications such as speakers. Thinner films (28 and 52 µm) are the most common, due...

The MHR Series of LVDTs is ideal for applications where excessive core weight could influence the motion of sensitive mechanisms. The lightweight core also helps minimize stresses and preserves the structural integrity of the core actuation...

The MHR-T Series LVDTs are a variant of the legendary MHR Series. The MHR-T Series provide precision measurements in space restrictive applications at temperatures up to 392°F continuous. With a diameter of just 3/8 inch , and an extremely...

The MHR-V Series LVDTs are a variant of the legendary MHR Series. The MHR-V is specifically designed for submersion in inert gas, mineral oil, and other non-aggressive oils (consult factory for medium compatibility) under pressures up to 10,000 PSI...

The MiniSense 100 is a low cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Pins are designed for easy installation and are solderable. Horizontal and vertical mounting options are offered. The...

The MiniSense 100 is a low cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Pins are designed for easy installation and are solderable. Horizontal and vertical mounting options are offered. The...

The LDTC MiniSense 100 Analog PCB provides a simple way to evaluate the LDTC MiniSense 100. The unit consists of LDTC MiniSense 100, a low-power operation amplifier, comparator, and DC/DC converter, and passive components used in signal...

The MiniSense 100NM is a low-cost cantilever-type vibration sensor offering moderate sensitivity over a useful frequency band up to 200 Hz. Pins are designed for easy installation and are solderable. Horizontal and vertical mounting options are...

Sliding the MLS Sensors along a magnetic scale will produce a sine and a cosine output signal as a function of the position. In order to deliver satisfying results, this will be achieved as long as the air gap between sensor edge and magnetic scale...

The MP Series of LVDTs is suitable for heavy industrial use. Its coils are encapsulated in an anodized extruded aluminum housing, providing protection against electromagnetic and electrostatic interference. A heavy-duty terminal barrier strip...

The Measurement Specialties microprocessor based LVDT indicator and set-point controller is designed for industrial and process control applications utilizing any LVDT/RVDT-based measurement...

Due to its featured properties - high sensitivity and almost no hysteresis – the MR174B sensors are used in a wide range of applications, like magnetic field measurement, revolution counters, proximity detecting, and position measurement. An...

Due to its featured properties - high accuracy and very low hysteresis - with a very small housing compatible with standard C-Slot and T-Slot cylinder, MRLF30 is providing great functional reliability and precise measurement for industrial...

The Model MS1451 is a piezoresistive silicon pressure sensor packaged in a surface mount configuration. It is intended for high volume applications where small size, light weight, low cost, and compatibility with automated assembly equipment are...

The Model MS1471 is a piezoresistive silicon pressure sensor, calibrated at room temperature. Packaged in a surface mount configuration, it is intended for high volume applications where small size, light weight, low cost, and compatibility with...

The MS32 is a magnetic field sensor which is built in the form of a Wheatstone bridge. Each of its four resistors is made from Permalloy, a material that shows the anisotropic magneto resistance effect. An uni-directional magnetic field in the...

The MS4400 series is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual-in-line configuration. Integral temperature compensation is provided over a 0° – 50°C temperature range using laser-trimmed resistors. The...

The MS45xx series is a small, ceramic based, PCB mounted pressure transducer using Measurement Specialties’ proprietary UltraStable™ technology (MS4525/MS4525DO) and the latest CMOS sensor conditioning circuitry. This series contains both analog...

The MS5201D is a gauge type SMD pressure sensor, suitable for applications which require relative (gauge) pressure measurements. The device consists of a silicon micro-machined pressure sensor die mounted on a 7.6 x 7.6 mm ceramic carrier protected...

The MS52XX SMD pressure sensor series is designed for pressure systems with the highest demands on resolution and accuracy. The device consists of a silicon micromachined pressure sensor die mounted on a 7.6 x 7.6 mm ceramic carrier protected by a...

The MS52xxC&T SMD pressure sensor series is designed for industrial pressure sensor systems with highest demands on resolution, accuracy and reliability. The device consists of a silicon micromachined pressure sensor die mounted on a 6.2 x 6.4 mm...

The MS54xx SMD pressure sensor series is designed for pressure sensor systems with highest demands on resolution and accuracy. The device consists of a silicon micromachined pressure sensor die mounted on a 6.2 x 6.4 mm ceramic carrier or a 6.1 x...

The MS5534C is a SMD-hybrid device including a piezoresistive pressure sensor and an ADC-Interface IC. It provides a 16-bit data word from a pressure and temperature dependent voltage. Additionally the module contains 6 readable coefficients for a...

The MS5535-30C is a high-pressure version of MS5535C pressure sensor module. It contains a precision piezoresistive pressure sensor and an ADC-Interface IC. It uses an antimagnetic polished stainless ring for sealing O-ring. It provides a 16 Bit...

The MS5535C is a SMD-hybrid device including a piezoresistive pressure sensor and an ADC-Interface IC. It provides a 16-bit data word from a pressure and temperature dependent voltage. Additionally the module contains 6 readable coefficients for a...

MS5536-60C is a family of high-resolution factory calibrated pressure sensors. The devices include a piezoresistive pressure sensor and an ADC-Interface IC. The 3-wire serial interface ensures simple communication with any microcontroller. The...

MS5536C is a family of high resolution factory calibrated pressure sensors. The leaded hybrids are compatible with standard PCB assembly technologies. The devices include a piezoresistive pressure sensor and a mixed signal IC. The 3-wire serial...

The MS5540C is a SMD-hybrid device including a precision piezoresistive pressure sensor and an ADC Interface IC. It is a miniature version of the MS5534C barometer/altimeter module and provides a 16-bit data word from a pressure and temperature...

The MS5541-30C is the high-pressure version of MS5541C pressure sensor module. It contains a precision piezoresistive pressure sensor and an improved version of the 16 Bit Micropower Sensor interface IC known from the MS5535C. The ESD sensitivity...

The MS5541C is the miniature version of MS5535C pressure sensor module. It contains a precision piezoresistive pressure sensor and an improved version of the 16-bit Micro-power Sensor interface IC known from the MS5535C. Compared to the previous...

The MS5561 is a SMD-hybrid device including a precision piezo-resistive pressure sensor and an ADC-Interface IC. It uses a three-wire serial interface for communication. The module dimensions of 4.75 mm x 4.25 mm and a height of only 1.6 mm allows...

The MS5607-02BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I2C bus interface. It is optimized for altimeters and variometers with an altitude resolution of 20 cm. This barometric pressure sensor...

The MS5611-01BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I²C bus interface. It is optimized for altimeters and variometers with an altitude resolution of 10 cm. The sensor module includes a high...

The MS5803-01BA is a new generation of high resolution altimeter sensors from Measurement Specialties with SPI and I²C bus interface. It is optimized for altimeters and variometers with an altitude resolution of 10 cm. The sensor module includes a...

The MS5803-02BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I2C bus interface. It is optimized for altimeters and variometers with an altitude resolution of 20 cm. The sensor module includes a high...

The MS5803-05BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I2C bus interface. It is optimized for depth meters and altimeters with an altitude resolution of 30 cm. The sensor module includes a high...

The MS5803-14BA is a new generation of high resolution pressure sensors with SPI and I2C bus interface. It is optimized for depth measurement systems with a water depth resolution of 1cm and below. The sensor module includes a high linear pressure...

The MS5803-30BA is a new generation of high resolution pressure sensors with SPI and I2C bus interface. It is optimized for depth measurement systems with a water depth resolution of 2.5cm and below. The sensor module includes a high linear pressure...

The MSP100 series pressure transducers from the Microfused™ line of MEAS, provides stainless steel media compatibility for the price of competing plastic sensors. This sensor has no silicone gel or polymeric media isolation methods to fail in...

The MSP 300 series pressure transducers from the Microfused™ line of Measurement Specialties set a new price performance standard for low cost, high volume, commercial and industrial applications. This series is suitable for measurement of liquid...

The MSP 340 series pressure transducers from the Microfused™ line of MEAS, high volume, commercial and industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water,...

The MT2A is a member of our family of rugged, accurate miniature cable-extension position transducers designed specifically for test applications. One of the major benefits to this sensor its 2-axis 360° rotating mounting bracket to allow for fast...

The MT2 and MT3 miniature series features a highly-tensioned heavy-duty measuring cable that was designed for the high-acceleration demands encountered in flight testing and automotive crash tests. The MT3A offers IP67 protection for testing...

The MT3A is the solution for high-acceleration test applications in potentially wet environments. Just like the MT2A, the MT3A comes in 4 different full-stroke ranges, has a high-tension heavy-duty measuring cable designed for the demands of flight...

The MTA miniature cable extension transducer combines 0.4% accuracy and 50-million cycle potentiometer life into a small package that gives designers high-performance to fit in small assemblies. Measurement ranges available are 0-3" and...

Model MTG-A1 triaxial mounting...

Model MTG-A2 triaxial mounting...

The NDT1-220K element offers outstanding ultrasonic transducer performance in a low-cost, flexible format for general-purpose use. 3 MHz nominal center frequency, with extremely low Q-factor of 1.3 (air-backed, into PMMA). Electrical impedance is...

The CAN-Series of conductive inclinometers offers modern SMD- technology in environmentally protected and robust aluminum housing. The inclinometer achieves high accuracy over a wide temperature range. The fast microcontroller works with...

The P-Series of conductive inclinometers offers modern technology in an environmentally protected and robust aluminium housing in IP class 65. The inclinometer achieves high accuracy over a wide temperature range. All P-type inclinometers are...

The P101 is a pressure transducer designed to measure pressure under a wide variety of conditions, including hostile environments and temperatures up to 150°C. Its stainless steel body and sealing options render the P101 ideal for use in chemically...

The P105 is a high pressure transducer designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments. The mechanical design and a stainless steel diaphragm allow the sensor to withstand most...

The P1200 Series pressure transducers and transmitters provide high accuracy pressure measurement of liquids and gases. These robust transducers combine hybrid electronics with highly reliable strain gauge sensing technology to offer superior...

The P125 is a high pressure transducer designed for to measure static and dynamic pressure up to 7 000 bar (600 kpsi). The mechanical design and a stainless steel construction allow the sensor to withstand most aggressive liquids and fatigue...

P15 - Pressure Gauge Transducer for Excess...

Standard versions of this transducer use a 17-4 PH stainless steel diaphragm to sense pressure (Inconel versions are available for operation in highly corrosive environments). The deflection of the diaphragm is transferred to a double cantilever...

The P9000 Series is a range of advanced, digitally compensated pressure transducers. The unique design of the P9000 pressure transducer utilizes the proven reliability of strain gauge technology and innovative digital compensation electronics. The...

Our PCA-116 family of gage heads was developed for less demanding applications where a balance between cost and performance is paramount. PCA-116 gage heads incorporate a standardized LVDT with repeatability better than 0.0001" (0.0025 mm) and...

The PCA-375 Series gage head is based on the MHR series of LVDTs. The modified MHR has an extended case and spring-loaded plunger. The design goals were simplicity and high reliability with low cost. This goal was met by implementing a plain bronze...

The PCA-375 PR-020 Series gage head is an ultra-compact device that provides accurate measurement in areas with limited space. Designed with a radial cable exit, the gage head easily fits within miniature fixtures and small inside diameters. AC...

The PCI-650 Series transmitter is extremely rugged and accurate. It features a spring-loaded guided probe with a hard tip, and a removable electronic module to facilitate installation into pressurized devices such as valves and actuators. The...

The Piezo Film Lab Amplifier is a versatile preamplifier for use with Piezoelectric sensors. The electric signal from the piezo film is generated within the electrodes of a capacitor. It is important to arrange an input that controls the rate of...

Piezo cable is another form for piezo polymer sensors. Designed as a coax cable, the piezo polymer is the "dielectric" between the center core and the outer braid. When the cable is compressed or stretched, a charge or voltage is generated...

This series is part of our instrument-grade line of cable-extension transducers. Perfect for slow to moderate acceleration applicaitons in laboratory, no-hostile environments. Measurement ranges up to 100 inches. Environmental suitability: NEMA 1,...

Based on Measurement-Specialties' original string pot design dating back to the late 1960’s, the PT101 has become a standard throughout the years for literally thousands of applications including aircraft structural testing, hydraulic cylinder...

The PT1 Series is part of our compact line of cable-extension transducers. Perfect for slow to moderate acceleration applications such as structural testing (indoors), automotive mechanism testing or hydraulic cylinder monitoring. Measurement ranges...

The PT1 Series is part of our compact line of cable-extension transducers. Perfect for slow to moderate acceleration applications such as structural testing (indoors), automotive mechanism testing or hydraulic cylinder monitoring. Measurement ranges...

The PT1 Series is part of our compact line of cable-extension transducers. Perfect for slow to moderate acceleration applications such as structural testing (indoors), automotive mechanism testing or hydraulic cylinder monitoring. Measurement ranges...

The PT1 Series is part of our compact line of cable-extension transducers. Perfect for slow to moderate acceleration applications such as structural testing (indoors), automotive mechanism testing or hydraulic cylinder monitoring. Measurement ranges...

The PT1 Series is part of our compact line of cable-extension transducers. Perfect for slow to moderate acceleration applications such as structural testing (indoors), automotive mechanism testing or hydraulic cylinder monitoring. Measurement ranges...

The PT1 Series is part of our compact line of cable-extension transducers. Perfect for slow to moderate acceleration applications such as structural testing (indoors), automotive mechanism testing or hydraulic cylinder monitoring. Measurement ranges...

The PT420 is available with full-scale measurement ranges from 2 to 100 inches, providing a 0/4-20 mA feedback signal that is linearly proportional to the position of a traveling stainless-steel extension cable. Use the PT420 to provide position...

This series is part of our instrument-grade line of cable-extension transducers. Perfect for slow to moderate acceleration applicaitons in laboratory, no-hostile environments. Measurement ranges up to 100 inches. Environmental suitability: NEMA 1,...

This series is part of our instrument-grade line of cable-extension transducers. Perfect for slow to moderate acceleration applicaitons in laboratory, no-hostile environments. Measurement ranges up to 100 inches. Environmental suitability: NEMA 1,...

The PT5 Series is part of our industrial line of cable-extension transducers. Excellent solution for high acceleration and high-cycle applications such as die-casting, injection molding or crash testing. Measurement ranges up to 250 inches....

Our unique linear-to-rotational, industrial-grade string encoder module mates to virtually any encoder, giving you a cost-effective linear position measurement solution...

The PT5 Series is part of our industrial line of cable-extension transducers. Excellent solution for high acceleration and high-cycle applications such as die-casting, injection molding or crash testing. Measurement ranges up to 250 inches....

The PT5 Series is part of our industrial line of cable-extension transducers. Excellent solution for high acceleration and high-cycle applications such as die-casting, injection molding or crash testing. Measurement ranges up to 250 inches....

The PT5 Series is part of our industrial line of cable-extension transducers. Excellent solution for high acceleration and high-cycle applications such as die-casting, injection molding or crash testing. Measurement ranges up to 250 inches....

The PT5 Series is part of our industrial line of cable-extension transducers. Excellent solution for high acceleration and high-cycle applications such as die-casting, injection molding or crash testing. Measurement ranges up to 250 inches....

The PT5DN, using a high cycle plastic-hybrid potentiometer, communicates via DeviceNET protocol with programmable controllers in factories and harsh environments...

The PT5 Series is part of our industrial line of cable-extension transducers. Excellent solution for high acceleration and high-cycle applications such as die-casting, injection molding or crash testing. Measurement ranges up to 250 inches....

The PT5 Series is part of our industrial line of cable-extension transducers. Excellent solution for high acceleration and high-cycle applications such as die-casting, injection molding or crash testing. Measurement ranges up to 250 inches....

Piezoelectric film (PVDF) ultrasonic transducer, wide angle GaAs IrLEDs, flexible printed circuit strip, and plastic tip guard assembly, for use in digitizer pen applications. The cylindrical transducer gives full 360° horizontal directivity and...

The PT8000 series is part of our industrial line of cable-extension transducers. Designed for rugged environments, the PT8000 series is a workhorse for applications such as metal forming, wet-end paper processing and injection molding. Measurement...

The PT8000 series is part of our industrial line of cable-extension transducers. Designed for rugged environments, the PT8000 series is a workhorse for applications such as metal forming, wet-end paper processing and injection molding. Measurement...

The PT8000 series is part of our industrial line of cable-extension transducers. Designed for rugged environments, the PT8000 series is a workhorse for applications such as metal forming, wet-end paper processing and injection molding. Measurement...

The PT8000 series is part of our industrial line of cable-extension transducers. Designed for rugged environments, the PT8000 series is a workhorse for applications such as metal forming, wet-end paper processing and injection molding. Measurement...

The PT8000 series is part of our industrial line of cable-extension transducers. Designed for rugged environments, the PT8000 series is a workhorse for applications such as metal forming, wet-end paper processing and injection molding. Measurement...

The PT8000 series is part of our industrial line of cable-extension transducers. Designed for rugged environments, the PT8000 series is a workhorse for applications such as metal forming, wet-end paper processing and injection molding. Measurement...