Interface

The ITCA series load cell is ideal for measuring both tensile and compressive forces. Available in capacities from 1MT to...

Model ITL is great for lifting applications where short or long distances are involved. This product can be amplified with 5VDC, 10VDC or 4-20mA output and is available in capacities from 11K lbf to 220K lbf (5 to 100 metric...

Model LBM Compression Load Button is constructed from stainless steel and has a small size. This product is available capacities range from 25 lbf up to 50K...

Model LBMP is stainless steel overload protected compression load button. This product is available in capacities ranging from 0.01kN to 100kN (2.25 lbf to 22.5K...

Model LBMU Ultra Compression Load Cell has a nonlinearity specification of +/-0.15%FS. It is constructed from stainless steel and is available in capacities from 100 lbf to 1K lbf (0.45kN to...

Model LBS Miniature Compression Load Button is constructed from stainless steel and has a small size. This product is available capacities range from 5 lbf up to 1K lbf (22.2 N to 4.45...

The LBSU ConvexBT Load Button Load Cell is superior to any other load button. Constructed from heat treated stainless steal and environmentally sealed with integral temperature...

Model LCT-1 Ultimate is a hand-held device that is specifically designed to fully troubleshoot strain-gage based load cells. It provides several tests that indicate bridge resistance and integrity, overload, and insulation resistance – which can...

Model LP Stainless Steel Load Pin is great for lifting applications where short or long distances are involved. This product can be amplified with 5VDC, 10VDC or 4-20mA...

Model LW is a stainless steel load washer or through hole load cell typically used for measuring tension on fasteners. This product is available in capacities ranging from 5 lbf to 100K lbf (22.2N to 444.82...

Model LWCF Clamping Force Load Cell is designed specifically to test clamping force for bolt testing. This product is constructed from stainless steel and is available in capacities ranging from 15 kN to 1500 kN (3.4K to 337.2K...

Model LWHP14 Load Washer is designed for use in force applications. Typical uses include monitoring the force required to press two parts together. This product is constructed from stainless steel and is available in capacities ranging from 0.05 kN...

Model LWHP18 Load Washer is designed for use in force applications. Typical uses include monitoring the force required to press two parts together. This product is constructed from stainless steel and is available in capacities ranging from 5 kN to...

Model LWMH1 Thru-Hole Load Cell is designed for use in force applications. This product is constructed from aluminium and is available in capacities ranging from 0.2 kN to 10 kN (45 to 2.25K...

Model LWMH2 Thru-Hole Load Cell is designed for use in force applications. Typical uses include monitoring the force required to press two parts together. This product is constructed from aluminium and is available in capacities ranging from 0.5 kN...

Model LWPF1 Press Force Load Cell features a large thru-hole and short overall height. This product is available in capacities ranging from 2 kN to 100 kN (450 to 22.5K...

Model LWPF2 Press Force Load Cell features a large thru-hole and short overall height. This product is available in capacities ranging from 100 kN to 600 kN (22.5K to 134.8K...

Model MB is a miniature beam load cell used in medical test machine and a variety of low capacity applications. Performance on this product is +/- 0.03% FS and available capacities are 5 to 250 lbf (22.2 N to 1.11...

Model MBI Overload Protected Mini Beam Load Cell has better resistance to off axis loads then other similar load cells and is fatigue rated. This product is available is capacities from 2 to 10 lbf (10 to 50...

The MBP is the same as MB mini beam with internal overload protestion. It is a miniature beam load cell used in medical test machine and a variety of low capacity applications. Available in capacities from 2.5 lbf. to 10...

Interface’s MBS Parallelogram load cell is made of lightweight aluminum construction and highly suitable for medical and robotics applications. This product is available is capacities from 2.2 to 10 lbf (9.8 to 44.5...

Model MCC is a miniature compression load cell used in medical test machine and a variety of low capacity applications.  500N (112.4 lb)...

The MRT’s flange design offers ease of installation in a low capacity, compact design. The low deflection and high torsional stiffness make the MRT a good choice for reciprocating measurements. Available capacities 0.2 Nm up to 20 Nm (1.77 lbf-in...

Model MRT2’s flange design offers ease of installation in a low capacity, compact design. The low deflection and high torsional stiffness make the MRT a good choice for reciprocating measurements. Available capacities from 5 Nm to 50 Nm (44.3...

Model MRT2P features 3X safe overload in 0.2 Nm and 2 Nm (1.77 to 17.7 lbf-in) capacities. The flange design makes it easy to mount. This product has low deflection and high torsional stiffness, which makes it a good choice for reciprocating...

Model MRTP features 7X safe overload in a 0.2 Nm (1.77 lbf-in) capacity. The flange design makes it easy to mount. This product has low deflection and high torsional stiffness, which makes it a good choice for reciprocating...

The MSC is a very small compression button-style load cell that has a relatively high capacity. This product is available in 15K, 20K and 30K lbf (65kN, 90kN, 130kN)...

Model MTFS Miniature Tension Load Cell is a small sized tension load cell that is available in capacity ranges from 1 kN to 100 kN (224.8 to 22.5K...

Model REC is a rod end load cell that is typically used with actuators. This product is available in capacities from 1K to 50K lbf (5 kN to 220...

Model SCB1 is a high resolution signal conditioning board that has 20-bit resolution with 0.003% nonlinearity. This product is designed for use with Interface Gold Standard Calibration Systems and can be provided in a single or dual channel...

Model SGA is a versatile signal conditioner featuring user selectable outputs of ±10V, ±5V, 0-10V, 0-5V, 0-20mA and 4-20ma. This product is DC or AC powered with switch selectable filters from 1 to 5kHz and is packaged in a sealed ABS enclosure....

The interface module SI-USB4 is connected between sensor and PC. In this way, analog sensor signals will be digitized with up to 16 bit resolution. By the measuring rate of 5000 measurements/s per measuring channel, high-dynamic measurements can be...

Model SM is a low cost highly accurate unsealed load cell for test machine and other general purpose applications. This product is available in capacities ranging from 10 to 1000 lbf (50 N to 5...

Model SMA is the miniature S-type load cell and great to use where size is a constraint. This product is available in capacities ranging from 15 to 200 lbf (60 to 900...

Model SML is a low height load cell with great performance! This product is available in capacities ranging from 5 to 2000 lbf (22 N to 9 kN). Tension and compression...

Model SMT is ideal for low capacity applications where loads cells are often inadvertently overloaded. The SMT has internal mechanical stops which prevents overloads for up to 10 times the rated...

Model SMTM is the miniature overload protected S-type load cell and great to use where size is a constraint. This product is available in capacities ranging from 5 to 50 lbf (20 to 200...

Model SPI is designed to be a high precision platform load cell. This product is compensated for off center loading and available in capacities ranging from 25 to 150 lbf (111.2 to 667.2...

Model SPI is designed to be a high precision platform load cell. This product is compensated for off center loading and available in capacities ranging from 3 to 15 lbf (13.34 to 66.72...

Model SSB is a highly accurate beam-type load cell for general purpose applications. This product is available in capacities ranging from 50 to 10,000 lbf (222.4 N to 44.48...

Model SSM is a moderately priced highly accurate sealed load cell for test machine and other general purpose applications. This product is available in capacities ranging from 50lbf to 10K...

Model SSM-FDH is a high temperature sealed load cell for test machine and other general purpose applications. This product is available in capacities ranging from 100 to 1K lbf (444 N to 10...

Model SSMF is a moderately priced fatigue rated sealed load cell for test machine and other general purpose applications. This product is available in capacities ranging from 25 to 2.5K lbf (100 N to 10...

Model SSMH S-type load cell provides a suitable force measurement sensor for applications in coal mining and transfer and other heavy industries where explosive dusts and environment conditions are potentially explosion-hazard rated. Available in 50...

The SuperSC is a economical general purpose load cell with a high force in a compact design. The SuperSC is environmentally sealed and insensitive to off axis loading. This product is available in capacities ranging from 25 to 1000 lbf (100 N to 5...

...

...

Features of the TS11 include threaded mounting holes and a center thru-hole design. Compact size allows mounting in tight spaces. Available capacities from 10 Nm to 20K Nm (88.5 lbf-in to 177K...

Features of the TS12 include convenient shaft-style mounting using standard couplings. The compact design allows mounting in tight spaces where rotational clearance is at a minimum. Available capacities from 0.005 Nm to 20K Nm (0.04 lbf-in to 177K...

The TS14 can be used to check torque wrenches and is useful for auditing fastener torque. Available capacities from 1 Nm to 5K Nm (8.85 lbf-in to 44.2K...

Model TS15 features a flange on one side and a female square connection on the other. Useful for bench-checking socket style torque wrenches. Available capacities from 2 Nm to 2K Nm (17.7 lbf-in to 17.7K...

The TS16 features a flange on one side and a male square drive connection on the other. Useful for fastener testing where the flange can be mounted to the bench and the square connection can accept sockets. Available capacities from 2 Nm to 2K Nm...

Model TS17 accepts standard hex-style screwdriver bits, useful for auditing fastener torque and checking screw installation after final assembly. Available capacities from 0.2 Nm to 20 Nm (1.77 lbf-in to 177...

Model TS18 has a convenient thru-hole flange mounting on one and a shaft on the other. Flange has internal pilot and the shaft is keyed per DIN 6885.1. Available capacities from 5 Nm to 2K Nm (44.3 lbf-in to 17.7K...

Model TS19 features an ultra-compact design, allowing the smallest possible flange-to-flange thickness of any reaction torque sensor. Both flanges include pilots. Available capacities from 50 Nm to 10K Nm (443 lbf-in to 88.5K...

Model TS20 Hollow Flange reaction torque transducer features a large thru-hole design. The thru-hole can be used for routing pneumatic or hydraulic lines, or wires, or can be used to pass a motor or actuator shaft. Available capacities from 10 Nm to...

Model TS21 miniature shaft style reaction torque transducer features keyed shafts and a compact package with short overall length. The keyed shafts allow positive engagement with fixtures or couplings. Nominal torque from 1 Nm to 100 Nm (8.85...

Model TS22 overload protected low capacity reaction torque transducer offers very low capacities and features 5x overload protection on capacities up to 2Nm. Commonly used for medical device testing. Capacities from 0.005 Nm to 20 Nm (0.044 lbf-in...

Model TSQ product comes calibrated in clockwise and counter clockwise directions and is available in capacities ranging from 300K to 3,000K lbf-in (34K to 340K...

Model TXY Load Cell can measure in both X and Y...

Model ULC is the world’s most accurate ultra-low capacity load cell measuring loads from 0.5 to 2 N (50 grams to 500...

The Model VSC2 Rugged Compact Vehicle Powered Signal Conditioner is a high accuracy precision differential amplifier designed for use in harsh environments with low thermal error and an operating range from -40 to +125 C. The VSC2 has a fast...

Model WMC is excellent for industrial applications because of its stainless steel, sealed, environmentally protected construction. This product is available in capacities ranging from 1K lbf to 10K lbf (5 kN to 45...

Model WMC is excellent for industrial applications because of its stainless steel, sealed, environmentally protected construction. This product is available in capacities ranging from 5 to 500 lbf (22 to 2200...

Interface Model WMC Rod End Load Cell is excellent for industrial applications because of its stainless steel, welded, environmentally protected construction. This product is available in capacities ranging from 15K to 200K lbf (66.7kN to 889.6...

Model WMCFP is excellent for industrial applications because of its stainless steel, sealed, environmentally protected construction. This product has overload protection which is an excellent safeguard in rugged applications. This product is...

Model WMCP is excellent for industrial applications because of its stainless steel, sealed, environmentally protected construction. This product has overload protection which is an excellent safeguard in rugged applications. This product is...

The WSSB S-Beam load cell series is ideal for measuring both tension and compressive forces where high accuracy measurements are required. IP68 rated and available in capacities from 250kg to...

The WSSCLC is constructed from stainless steel and has a fully welded construction, offering a high level of corrosion resistance for use in harsh environments, with environmental sealing to IP68. Available in capacities from 220 – 16.5K lbf (100...

The WSSCLC-MOUNT is a complete weighing assembly for use with the WSSCLC range of load...

Model WTS 1200 Standard Precision LowProfile™ Wireless Load Cell are designed for general purpose applications requiring a wireless load cell that is compensated for eccentric loads. This load cell can transmit distances up to 2000 feet (610...

Transmitter Module...

The WTS-AM-1E connects to strain bridge transducers such as load cells, torque sensors, strain gauges and pressure modules and forms part of the WTS modular telemetry system. The data transmitted by the WTS-AM-1E can be received by multiple WTS...

The WTS-AM-1F transmitter connects to strain bridge transducers such as load cells, torque sensors, strain gauges and pressure modules and forms part of the WTS modular telemetry system. Transmits at 2000/samples per...

The WTS-AM-2 connects to 0-10 V conditioned sensors such as pressure, %RH, inclinometer, accelerometer, depth, vibration, temperature and flow. It forms part of the WTS modular telemetry...

The WTS-AM-3 transmitter module connects to 4-20 mA conditioned sensors such as pressure, %RH, inclinometer, accelerometer, depth, vibration, temperature and flow. It forms part of the WTS modular telemetry...

The WTS Telemetry Antenna WTS-ANTA, WTS-ANTB and WTS-ANTC can be integrated with any of the WTS modules which are factory fitted with UFL antenna...

The WTS-AR Wireless Repeater Module which will allow the WTS telemetry system modules to span around obstacles, increase range and coverage by retransmitting received...

The WTS-BS-1 is a roaming handheld allowing the operator to cycle the display between all available transmitter modules and forms part of the WTS modular telemetry system. It does not require pre-configuration of associated transmitters and will...

The WTS-BS-1-HA Wireless Multiple Transmitters handheld displays data from up to 12 wireless transmitter modules and forms part of the WTS modular telemetry system. It provides either a summed total from all selected transmitters and the ability to...

The WTS-BS-1-HS handheld displays data from any of the WTS wireless transmitter modules and forms part of the WTS modular telemetry system. It provides a point to point connection to a single...

The WTS-BS-3E is one of a range of base stations that are required for configuration and calibration of the WTS modular telemetry system. Base stations can also be used for data collection systems by making available the WTS wireless transmitter...

The WTS-BS-4 is one of a range of base stations for the WTS modular telemetry system. It has a USB interface, is housed in an IP67 enclosure and has better coverage than the...

Model WTSLP Wireless Stainless Steel Load Pin is great for lifting applications where short or long distances are involved. This product can transmit wirelessly up to 600 meters in distance (clear line of sight) to a handheld display or USB base...

The WTSSHK-B range of telemetry load shackles are manufactured using the Crosby™ G2130 (12 to 15 MT / 26.5K and 33.1K lbf) and G2140 (40 to 120 MT / 88.2K to 265K lbf) shackles. The built in radio telemetry electronics operates on the 2.4GHz...

The WTSSHK-B-HL range of telemetry load shackles are manufactured using the GN rope H10 shackle. Suitable for use in a wide range of industrial and marine heavy lift weighing applications, these load shackles provide a robust and effective method of...

WTSSHK-B-JR Wireless Crosby™ Bow Load Shackle range of telemetry load shackles are manufactured using the Crosby™ G2130 shackle. Suitable for use in a wide range of lower capacity industrial weighing applications, these load shackles are...

The WTSSHK-D range of telemetry load shackles are manufactured using the Crosby™ G2150 shackles. Versions are also available using the popular GreenPin™ range of shackles. The built in radio telemetry electronics operates on the 2.4GHz license...

WTSTL is great for lifting applications where short or long distances are involved. This product can transmit wirelessly up to 600 meters in distance (clear line of sight) to a handheld display or USB base station. Available in capacities  from 11K...

Model 9390 has a 6-digit Unipolar display in a rugged NEMA 4X Stainless Steel washdown enclosure. This instrument can power up to 4 load cells for portable and can be used for remote weighing applications. Standby mode is available for extended...

Model 9820 is a bipolar, 5-digit display featuring 2000Hz high-bandwidth, up to ±10V analog output, front-panel shunt calibration and tare, peak and valley monitoring. Sensor connection is via a removable screw-terminal...

For use with amplified load cells and rotary torque sensors. Features 120 readings per second, programmable +/-10V or 4-20mA analog output, peak and valley monitoring, RS232. Packaged in an aluminum 1/8 DIN, panel mountable enclosure with a plug-in...

Model DCA is powered by 10-28V supply and user selectable ±10V, ±5V or 4-20mA output in a small NEMA 4X sealed ABS enclosure. This product features 100Hz...

Model INF-USB2 makes any load cell USB compatible. This product provides an easy interface for collecting data from an Interface transducer directly into your computer. Included software works well for convenient testing and monitoring applications...

Model SI-USB makes any Load Cell USB Compatible. This product provides an easy interface for collecting data from an Interface transducer directly into your computer. The second channel can be used to collect and synchronize data from a second...