AR550 High Speed Laser Position Sensor

The AR550 high speed laser sensor is Acuity’s fastest triangulation device for dimensional and distance measurement. At sampling rates up to 70kHz, these sensors are typically used for applications that demand high speed such as vibration measurements, scanning of roads, vehicle crash test, and ballistic measurements. Industry Leading Speed

SomatXR CX27C-R Ultra-Ruggedized Gateway Interface

SomatXR CX27C-R: Parallel Data Analysis and Automation via EtherCAT® and PROFINET IRT The SomatXR CX27C-R Industrial Ethernet gateway enables the integration of up to 199 signals from up to 24 SomatXR modules into a measurement chain, which can also be simultaneously acquired in real time. It is, therefore, perfectly suitable

MONI LOG® MicroShockDetector_PLUS

Compact, light-weight shock data logger Registers the 200 largest shock events in the X, Y, Z direction Saves up to 10 curve progressions of the largest shocks Intelligent signal filtering and evaluation Indicates limit value overruns with alarm LED Continuous recording of temperature, humidity, air pressure, light Intuitive operation, extremely

DMH Series – High-Performance Digital MEMS Inclinometer

The Jewell Instruments model DMH is a high precision MEMS inclinometer. Units are available with RS232, RS422, RS485 and UART TTL options. All DMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request. FEATURES • Single-Axis and Dual-Axis

AMS Series – Mid-Level MEMS Inclinometer

The Jewell Instruments model AMS is a mid-level performance analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up to 1m. Custom ranges and output types are also available on request. FEATURES •

AMH Series – High Precision MEMS Inclinometer

The Jewell Instruments model AMH is a high precision MEMS inclinometer. Standard units are available with 0-5V, 0.5-4.5V, or 4-20mA output options. All AMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request. FEATURES • Single-Axis and Dual-Axis

AMI Series – MEMS Inclinometer – Temp Corrected

The model AMI is a high precision MEMS inclinometer with built-in thermal compensation. Standard units come with 0-5V, 0.5-4.5V or 4-20mA output options. All AMI series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request. FEATURES • Single-Axis and

AML Series – MEMS Inclinometer

The Jewell Instruments model AML is a low cost analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up to 1m. Custom ranges and output types are also available on request. FEATURES •

JMI-L Series MEMS Inclinometer

The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. 4-20mA output version With a lightweight aluminum enclosure, the JMI is conducive to many OEM applications and with an

JMA-165-RH Series MEMS Accelerometer – Heater Version – CENELEC / AREMA

The Jewell Instruments JMA-165 MEMS accelerometers are a cost effective and viable alternative to traditional force balance designs. This mighty little sensor is CENELEC, AREMA certified, and RoHS compliant. With options for heated or non-heated, and available filtering, you can customize the perfect sensor for your application. FEATURES ±0.5

JMA-165-R Series MEMS Accelerometer – Non-Heater Version – CENELEC / AREMA

The Jewell Instruments JMA-165 MEMS accelerometers are a cost effective and viable alternative to traditional force balance designs. This mighty little sensor is CENELEC, AREMA certified, and RoHS compliant. With options for heated or non-heated, and available filtering, you can customize the perfect sensor for your application. FEATURES ±0.5

AMA Series MEMS Accelerometer

Jewell Instruments AMA Series Accelerometers are an excellent choice for cost to performance trade off. The AMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability. Analog output. FEATURES Single, Dual and Triaxial Configuration Excellent long term stability Ruggedized for harsh

DMA Series Digital MEMS Accelerometer

Jewell Instruments DMA Series Accelerometers are an excellent choice for cost to performance trade off. The DMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability. RS232 / RS485 TTL UART FEATURES Single, Dual and Triaxial Configuration Digital Communications Excellent long

TE 7101A IEPE Accelerometer

The Model 7101A is a miniature, high performance IEPE accelerometer available in ±50g to ±1000g dynamic ranges. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >10kHz utilizing stable piezo-ceramic crystals in annular shear mode. The model 7101A features a hermetically sealed

9870 High Performance Digital Indicator with TEDS

High Performance Color Graphic LCD Screen TEDS Plug and Play Sampling and Response Time from 4,000 to 20,000 per second TEDS Read and Write Nonlinearity 0.01% Full Scale 24 Bit A/D Converter Remote Sense Function Variety of Hold Functions Scalable Analog Output (0-5 VDC, ±5 VDC, 0-10 VDC, ±10VDC, 4-20mA

JDI Series – Digital MEMS Inclinometer

The JDI-100/200 series is a digitally temperature compensated inclinometer available in single and dual axis configurations. The robust and rugged design is great for industrial use, yet includes the low-cost MEMS technology. These units are available with DB9, Pigtail, Deutsch, Double Deutsch, 6-Pin Circular (C06), or M12 connectors for maximum

T40MS – Torque Flange

T40MS Torque Transducer: from 500 Nm to 2 kNm at 25,000 rpm T40MS is outstanding for its precision, reproducibility and robustness and is particularly well-suited for static and dynamic torque measurement. The torque transducer features 0.03% accuracy in terms of linearity including hysteresis, as well as high temperature stability. Combined

AR100 Laser Displacement Sensor

The AR100 is one of the smallest laser displacement sensors in the world. The ultra-compact AR100 comes with ranges from 10mm (0.4 in.) to 500mm (19.7 in.) with a single case size. It can take 9,400 measurements per second and has a linearity of ± 0.05% of the full measurement

SomatXR MX471C-R Ultra-Rugged CANbus FD Module

The SomatXR MX471-R CAN bus module allows the simultaneous integration of up to four CAN networks into the SomatXR data acquisition system. This module is the more rugged version of the QuantumX MX471 and is ideal for use in extremely tough conditions, such as vehicle tests in the field and

QuantumX MX471C CANbus FD module

CAN bus Module for Easy Integration of up to 4 CAN Networks The QuantumX MX471 CAN bus module allows the simultaneous integration of up to four CAN networks into the QuantumX data acquisition system and can be expanded as required. The module, combined with analog measurement modules, is ideally suited

TFX-5000 Ultrasonic Clamp-on Flow Meter

TFX-5000 ultrasonic clamp-on meters are quickly and easily installed without cutting or tapping the pipe. Ultrasonic waves transmit upstream and downstream through the pipe wall and water flowing in the pipes. By measuring the difference in the travel time and knowing the pipe size, the meter determines the velocity and flow

Food & Pharmaceuticals