A Division of the Hoskin Group, Canada's Instrumentation Leader
Precision Measurement for Defense & Military Applications
Military applications for sensor technology include the development of transportation systems (eg. tanks and aircraft), weaponry and communication and monitoring systems.
Precision Measurement for Defense & Military Applications Products:
Precision Measurement for Defense & Military Applications
ECG – eCompass Series
If your compass application involves vibration, acceleration, uneven terrain, or rough seas, the ECG Series, a gyro-stabilized electronic compass, is an uncompromising solution that will outperform rival units that cost more. The ECG provides remarkably accurate heading, pitch, and roll in dynamic conditions. It all starts with a precision 3-axis
ECC – 2D – eCompass Series
The ECC-2D Series is a low-cost 2D digital compass in a small package with low power consumption and high reliability designed for commercial and industrial users. FEATURES: Heading accuracy: ±1° Hard & soft iron magnetic compensation Wide operating temp range: -40° to +85°C Low-cost electronic compass RS-232, RS-485, and TTL
GN310B GN311B Power Analyzer Card
Input Card For High-Accuracy Power Measurements in Electric Drives and Electrical Grids – GN310B, GN311B The power analyzer card offers three power channels, each one consisting of one voltage input and one current (or voltage) input. The card also offers 2 digital channels for torque and speed measurements. It is specially
AS2100 Laser Distance Sensor
Superior Accuracy at Long Range The AS2100 accurate distance sensor can measure natural targets up to 100m (328 ft) away and Acuity reflective targets up to 500m (1640 ft) away with an accuracy of ± 1mm (0.04 in) depending on target reflectance and environmental conditions. The AS2100 is a rugged laser
2161 High Capacity Column Load Cell – Compression Only
Model 2161 is a column compression only load cell typically used in higher force applications. Options Available for 2nd Bridge. FEATURES • Capacities from 300K to 1000K (1335 to 4450 kN) • Performance to ±0.15% FS • Compact size • Metric and English models • Screw in handles OPTIONS •
Acuity Laser Touch Panel Display
The Acuity™ 8” Touch Panel Display is a stand-alone industrial PC interface for use with Acuity laser distance sensors. These fully enclosed units replace panel meters, alphanumeric displays, and analog controllers by providing a modern interface through a full-color LCD and touch screen. Depending on the application, the TPD is
AR550 High Speed Laser Position Sensor
The AR550 high speed laser sensor is Acuity’s fastest triangulation device for dimensional and distance measurement. At sampling rates up to 70kHz, these sensors are typically used for applications that demand high speed such as vibration measurements, scanning of roads, vehicle crash test, and ballistic measurements. Industry Leading Speed
SomatXR CX27C-R Ultra-Ruggedized Gateway Interface
SomatXR CX27C-R: Parallel Data Analysis and Automation via EtherCAT® and PROFINET IRT The SomatXR CX27C-R Industrial Ethernet gateway enables the integration of up to 199 signals from up to 24 SomatXR modules into a measurement chain, which can also be simultaneously acquired in real time. It is, therefore, perfectly suitable
PCB Strain Gauge Testing Kit
Everything You Need for PCB Testing Get started right away: The printed circuit board test kit includes all materials you need for strain measurement on PCBs. Printed Circuit Board (PCB) Test Kit: Fast and Easy Testing The reliability of complex electronics in mobile use or harsh environments is a result
MONI LOG® MicroShockDetector_PLUS
Compact, light-weight shock data logger Registers the 200 largest shock events in the X, Y, Z direction Saves up to 10 curve progressions of the largest shocks Intelligent signal filtering and evaluation Indicates limit value overruns with alarm LED Continuous recording of temperature, humidity, air pressure, light Intuitive operation, extremely
DMH Series – High-Performance Digital MEMS Inclinometer
The Jewell Instruments model DMH is a high precision MEMS inclinometer. Units are available with RS232, RS422, RS485 and UART TTL options. All DMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request. FEATURES • Single-Axis and Dual-Axis
AMS Series – Mid-Level MEMS Inclinometer
The Jewell Instruments model AMS is a mid-level performance analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up to 1m. Custom ranges and output types are also available on request. FEATURES •
AMH Series – High Precision MEMS Inclinometer
The Jewell Instruments model AMH is a high precision MEMS inclinometer. Standard units are available with 0-5V, 0.5-4.5V, or 4-20mA output options. All AMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request. FEATURES • Single-Axis and Dual-Axis
AMI Series – MEMS Inclinometer – Temp Corrected
The model AMI is a high precision MEMS inclinometer with built-in thermal compensation. Standard units come with 0-5V, 0.5-4.5V or 4-20mA output options. All AMI series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request. FEATURES • Single-Axis and
AML Series – MEMS Inclinometer
The Jewell Instruments model AML is a low cost analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up to 1m. Custom ranges and output types are also available on request. FEATURES •
JMI-L Series MEMS Inclinometer
The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. 4-20mA output version With a lightweight aluminum enclosure, the JMI is conducive to many OEM applications and with an
JMA-165-RH Series MEMS Accelerometer – Heater Version – CENELEC / AREMA
The Jewell Instruments JMA-165 MEMS accelerometers are a cost effective and viable alternative to traditional force balance designs. This mighty little sensor is CENELEC, AREMA certified, and RoHS compliant. With options for heated or non-heated, and available filtering, you can customize the perfect sensor for your application. FEATURES ±0.5JMA-165-R Series MEMS Accelerometer – Non-Heater Version – CENELEC / AREMA
The Jewell Instruments JMA-165 MEMS accelerometers are a cost effective and viable alternative to traditional force balance designs. This mighty little sensor is CENELEC, AREMA certified, and RoHS compliant. With options for heated or non-heated, and available filtering, you can customize the perfect sensor for your application. FEATURES ±0.5
AMA Series MEMS Accelerometer
Jewell Instruments AMA Series Accelerometers are an excellent choice for cost to performance trade off. The AMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability. Analog output. FEATURES Single, Dual and Triaxial Configuration Excellent long term stability Ruggedized for harsh
DMA Series Digital MEMS Accelerometer
Jewell Instruments DMA Series Accelerometers are an excellent choice for cost to performance trade off. The DMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability. RS232 / RS485 TTL UART FEATURES Single, Dual and Triaxial Configuration Digital Communications Excellent long
JMA-L Series MEMS Accelerometer
The JMA-100/200/300 accelerometer series, a robust and affordable acceleration solution, is now available with ±4 g and ±10 g measuring ranges. These additional ranges are intended for applications that include wider movement, but do not need as much sensitivity. The JMA-100/200/300 series contains MEMS technology and is available in single (JMA-100), dual