The Interface INF4-Analog Two, Three, and Four Sensor Weight Transmitter and Indicator with six-digit red LED display (8 mm height). Space saving compact design. Four buttons for the system calibration. Six indicator led. Dimensions: 26 x 115 x 120 mm. With 4 independent reading channels for load cells (individual load
The Interface INF1-Ethernet IP Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES 2x Ethernet/IP ports Type: RJ45 10Base-T or 100Base-TX (auto-sensing) The instrument works as adapter
The Interface INF1-Ethernet TCP IP Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES Ethernet TCP/IP port Type: RJ45 10Base-T or 100Base-TX (auto-sensing) The instrument works in
The Interface INF1-Modbus TCP Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES Modbus/TCP port Type: RJ45 10Base-T or 100Base-TX (auto-sensing) The instrument works as slave in
The Interface INF1-RS485 Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES Baud rate: 2400, 4800, 9600, 19200, 38400, 115200 (bit/s) RS485 serial port for communication via
The Interface INF1-Analog Single Sensor Weight Transmitter and Indicator with six-digit red LED display (8 mm height). Space saving compact design. Four buttons for the system calibration. Six indicator led. Dimensions: 25 x 115 x 120 mm. FEATURES 16-bit Analog output: 0-20mA, 4-20mA, 0-5V, 0-10V, +/-5V, +/-10V Connection to:
An air-cooled electrodynamic shaker used in R&D and production for vibration and mechanical shock testing of medium-to-large payloads up to 600 kg (1323 lb) as standard, such as the batteries of electric and hybrid vehicles. It has a peak sine force rating of 35.6 kN (8000 lbf). The LDS® V8750
Jewell Instruments AKA Series Accelerometers are an excellent choice for cost to performance trade-off. The AKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability. SC version 0-5V output LC version 4-20mA output FEATURES Triaxial Configuration Measuring ranges of ±2G thru
Jewell Instruments AKA Series Accelerometers are an excellent choice for cost to performance trade-off. The AKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability. SC version 0-5V output LC version 4-20mA output FEATURES Triaxial Configuration Measuring ranges of ±2G thru
The ECV eCompass Series is a 3D electronic compass providing stable azimuth, pitch, and roll measurements in dynamic conditions. As an enhanced version of our ECG Series, the ECV includes a full suite of precision, 3-axis, MEMS sensors, and an optional dual-axis electrolytic tilt sensor, for the ultimate in near-level accuracy. A high-performance
The ECS digital compass represents the state-of-the-art in magnetic compassing. It combines a precision 3-axis solid-state magnetometer and a rugged 2-axis electrolytic tilt sensor to provide accurate heading and tilt measurements over a wide range of environmental conditions. The firmware and signal processing algorithms have been refined and improved over
The ECL low-power digital compass is designed specifically for commercial, industrial, and military users. The ECL series will be of particular interest to ROV and AUV manufacturers who are concerned with power usage and accurate heading in all types of challenging conditions. In standby mode, it draws a mere 50
If your compass application involves vibration, acceleration, uneven terrain, or rough seas, the ECG Series, a gyro-stabilized electronic compass, is an uncompromising solution that will outperform rival units that cost more. The ECG provides remarkably accurate heading, pitch, and roll in dynamic conditions. It all starts with a precision 3-axis
The ECC-2D Series is a low-cost 2D digital compass in a small package with low power consumption and high reliability designed for commercial and industrial users. FEATURES: Heading accuracy: ±1° Hard & soft iron magnetic compensation Wide operating temp range: -40° to +85°C Low-cost electronic compass RS-232, RS-485, and TTL
Input Card For High-Accuracy Power Measurements in Electric Drives and Electrical Grids – GN310B, GN311B The power analyzer card offers three power channels, each one consisting of one voltage input and one current (or voltage) input. The card also offers 2 digital channels for torque and speed measurements. It is specially
Model 2161 is a column compression only load cell typically used in higher force applications. Options Available for 2nd Bridge. FEATURES • Capacities from 300K to 1000K (1335 to 4450 kN) • Performance to ±0.15% FS • Compact size • Metric and English models • Screw in handles OPTIONS •
The Acuity™ 7” Touch Panel Display is a stand-alone industrial PC interface for use with Acuity laser distance sensors. These fully enclosed units replace panel meters, alphanumeric displays and analog controllers by providing a modern interface through a full-color LCD and touch screen. The Touch Panel Display communicates with one
The AR550 high speed laser sensor is Acuity’s fastest triangulation device for dimensional and distance measurement. At sampling rates up to 70kHz, these sensors are typically used for applications that demand high speed such as vibration measurements, scanning of roads, vehicle crash test, and ballistic measurements. Industry Leading Speed
SomatXR CX27C-R: Parallel Data Analysis and Automation via EtherCAT® and PROFINET IRT The SomatXR CX27C-R Industrial Ethernet gateway enables the integration of up to 199 signals from up to 24 SomatXR modules into a measurement chain, which can also be simultaneously acquired in real time. It is, therefore, perfectly suitable
Everything You Need for PCB Testing Get started right away: The printed circuit board test kit includes all materials you need for strain measurement on PCBs. Printed Circuit Board (PCB) Test Kit: Fast and Easy Testing The reliability of complex electronics in mobile use or harsh environments is a result
Compact, light-weight shock data logger Registers the 200 largest shock events in the X, Y, Z direction Saves up to 10 curve progressions of the largest shocks Intelligent signal filtering and evaluation Indicates limit value overruns with alarm LED Continuous recording of temperature, humidity, air pressure, light Intuitive operation, extremely