Military
Military applications for sensor technology include the development of transportation systems (eg. tanks and aircraft), weaponry and communication and monitoring systems.
Military Products:
Military
EOLIS 0030A2 Double Isolator
These analog converters 0...4... 20mA – 0...4... 20mA are available in 2 ranges: EOLIS 0030A2 is a double isolator: each independent and isolated channel has an input 0... 4... 20mA with sensor power supply and a current output 0... 4... 20mA EOLIS 0030A2- F is a double isolator: each independent
ULCOS 820F2 Frequency Input Module
ULCOS 820F2 is a frequency converter, coupled with a sensor power supply, with 2 analog outputs and 2 relays. ULCOS is guaranteed for 10 years !
TELIS 6000 AC Current and AC Voltage input Module
TELIS 6000 is a digital converter with alternating current or alternating voltage input. Two input calibrations are possible: 0 to 5A and 0 to 1A, from 45Hz to 65Hz TELIS 6000 is guaranteed for 5 years
TELIS 8000 Frequency Input Module
TELIS 8000 is a frequency input transmitter offering 1 current and/or voltage output with 1 to 4 relay outputs. TELIS 8000 is guaranteed for 5 years
JK 6040A1 AC Current Input Module
JK 6010A1 is an analog converter for alternating current input. Two input calibrations are possible: 0 to 5A and 0 to 1A, from 45Hz to 65Hz. The JL6010A1 converters use the JM Concept universal power supply: 20Vdc - 240Vdc; 80Vac - 256Vac 50-60Hz. JK 6010A1 is guaranteed for 5 years
ULCOS 900 Universal Input Module
ULCOS 900 is a universal converter: direct current, DC voltage, variable resistance probe, thermocouple, potentiometer, 2-wire resistor, special table for NTC / PTC, lined with a sensor power supply, and with 1 or 2 analog outputs and 2 relays. 2500Vrms to 4200Vrms isolation ! ULCOS 900 is guaranteed for 10
GK 3000D1 Isolated Redundancy Module
PLC redundancy must be considered in two scenarios: Interfacing of two PLCs to one actuator Interfacing of a sensor to two PLCs The GK3000D1 converters are particularly designed with their 2 analog inputs and their 2 discrete inputs, to solve redundancy problems. GK 3000D1 is guaranteed for 5 years
EOLIS 3000 Dual Process Input Convertor Module
The DUAL CHANNEL, INDEPENDENTLY ISOLATED design of EOLIS 3000 allows the realization of two converters in a 22.5mm case. EOLIS 3000 is a converter of process inputs (0-20 mA; 4 -20 mA, 0-100mv - 0-1V; 0-10V) or of resistive inputs or PT100 2 wires, 2 analog outputs and up to
JK 3000 Process Input Module
The JK 3000 series allows the isolation and conditioning of analog signals. Single Process Input: (0-20mA, 4-20mA, 0-100mV, 0-10V, +/-10V, other values on request up to 1000V). Single or Dual Output of (0-20mA, 4-20mA, 0-10V); +/-10V available only on output 2. With the lightning shock protection option, the converter protects
JK 7000 Potentiometric Input Module
In order to respond to the problems of isolation and transmission of a potentiometric signal, JM concept has developed 2 analog converters with potentiometer input. Analog technology allows signal processing with a response time of less than ms. The use of high performance components in a wide temperature range guarantees
TELIS 1000 Bridge Input Module
TELIS 1000 is a converter from the TELIS range dedicated to measurements with a gauge bridge, coupled with a sensor power supply, a digital input, one or 2 analog outputs and up to 2 relays and an RS485 communication port Modbus RTU. TELIS 1000 is an isolated converter (quadruple galvanic
TELIS 9000 Universal Input Module
TELIS 9000 is a universal converter for Current (direct), Voltage, (direct), Variable resistance probe, Thermocouple, Potentiometer, 2-wire resistance, Special table for NTC PTC) coupled with a sensor supply for each input, one or 2 isolated analog outputs and up to 4 relays and an RS485 Modbus RTU communication port. TELIS
LINE series data concentrators
JM Concept has developed an interfacing system to decentralize the analog inputs and outputs and to send the data back via fieldbus. The principle is based on JM Concept's analog signal processing and isolation technology. The system is fully modular and scalable. The inputs can be process inputs as well as
UHLIS 3000 Multi-channel input module
UHLIS allows the acquisition of 4 simultaneous channels in a 22.5mm case, reducing the footprint to less than 6mm each. Its 4 channel isolated Current or Voltage inputs each benefit from an independent sensor power supply that can be activated by switch. Modbus TCP connection via an RJ45 allows for
LBSU – ConvexBT – Load Button Load Cell
The LBSU ConvexBT Load Button Load Cell is superior to any other load button. Constructed from heat treated stainless steal and environmentally sealed with integral temperature compensation. FEATURES: Superior to any other load button Integral temperature compensation Enhanced eccentric load rejection Multi-point calibration Integral load button Small diameter Environmentally
MCC Miniature Compression Load Cell
Model MCC is a miniature compression load cell used in medical test machine and a variety of low capacity applications. 500N (112.4 lb) capacity. FEATURES: Proprietary Interface temperature compensated strain gages Performance to 0.10% Low height – 1.12 in (28.3 mm) 0.002%/°F temp. effect on output SPECIFICATIONS:
INF-USB3 USB Single Channel PC Interface Module
Sensor to USB Output Converter Model INF-USB3 PC Interface Module makes any Load Cell USB Compatible. This product provides an easy interface for collecting data from an Interface transducer directly into your computer. Included software works well for convenient testing and monitoring applications benefiting from immediate evaluation or collection for
INF4 – Ethernet TCP IP – Multi-Channel Sensor Weight Transmitter
The Interface INF4-Ethernet TCP IP Two, Three, and Four Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES Ethernet TCP/IP port Type: RJ45 10Base-T or 100Base-TX (auto-sensing) The
INF4 – Ethernet IP – Multi-Channel Sensor Weight Transmitter
The Interface INF4-Ethernet IP Two, Three, and Four Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES 2x Ethernet/IP ports Type: RJ45 10Base-T or 100Base-TX (auto-sensing) The instrument
INF4 – Modbus TCP – Multi-Channel Sensor Weight Transmitter
The Interface INF4-Modbus TCP Two, Three, and Four Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES Modbus/TCP port Type: RJ45 10Base-T or 100Base-TX (auto-sensing) The instrument works