A Division of the Hoskin Group, Canada's Instrumentation Leader
Transportation
Transport or transportation is the movement of people and goods from one location to another. Transport is performed by modes, such as air, rail, road, water, cable, pipeline and space. Sensor technology can be utilized in the production and control of the operations, infrastructure or vehicles.
Transportation Products:
Transportation
UA-2118 Headphone Test, 2 + 2 Channel LAN-XI Front Panel
UA-2118-022 is a dedicated analogue interface for headphone testing allowing simultaneous testing of left and right headphones. A three-position switch on the front panel switches the output of Generator 1 between left earphone, both earphones and right earphone. USE SCENARIO Testing of headphones, small loudspeakers and receivers Connector type: LEMO,
UA-2117 Generator Front Panel For 200 kHz LAN-XI Module
The UA-2117-011 is the default front panel for the 200 kHZ LAN-XI module Type 3161-A-011. USE SCENARIOS High-frequency sound and vibration measurements Underwater acoustics applications High-energy impact measurements High-frequency system excitation and transducer calibration The front panel has three different input connectors, BNC/ LEMO/ TNC, that allow connectivity for a
UA-2116 12 Channel Charge Input Front Panel
The UA-2116-120 allows up to 12 charge type transducers to be connected directly to the LAN-Xi front end, simplifying the setup and the performance. USE SCENARIOS Charge type transducers: Accelerometers, pressure sensors, hydrophones Combustion pressure monitoring on up to 12-cylinder engines High channel count charge accelerometer applications Ideal for high
UA-2114 Dynamic Bridge Transducer Front Panels
The UA-2114 front panels are specifically designed for use with Kulite Bridge Transducers such as the LQ-080 series and the LQ-125 series used in the aerospace industry for dynamic measurements on aircraft and in wind tunnels. USE SCENARIO Kulite Bridge Transducers UA-2114 is supplied from ±5 V and deliver ±5
UA-2113 6 Channel In/Out Monitor Front Panel
The UA-2113 front panel provides buffered monitors outputs in parallel to the inputs. It allows input signals to be simultaneously fed into both the LAN-XI system and also a second system like a recorder. USE SCENARIOS Monitor outputs General purpose sound and vibration measurements Direct Voltage CCLD Microphone CCLD Accelerometer
UA-2112 Array Front Panels
The UA-2112 front panels features 2 and 4 multi-pin connectors for six array microphones. It is primarily intended for Array Acoustic systems. USE SCENARIO Array acoustics Connector type: LEMO Front panels Compatible LAN-XI modules UA-2112-120 Type 3053-B-120 UA-2112-060 Type 3050-A-060
UA-2111 Auxiliary Front Panel
The UA-2111 is the default front panel on both LAN-XI Type 3056 auxiliary module. It features 4 x BNC connectors for general sound and vibration measurement and 2 x 10-pin LEMO connectors for 8 channel auxiliary signal inputs. The auxiliary channels are connected using the auxiliary cable: AO-0738-D-010. USE SCENARIOS Low-frequency auxiliary
UA-2110 Auxiliary Front Panel With 200V Microphone Inputs
The UA-2110 is an auxiliary front panel designed for applications combining auxiliary data with microphones that require 200V polarization voltage. It features 4 x LEMO (7 pin) connectors for 200V microphones and has 2 x 10-pin LEMO connectors for 8 channel auxiliary signal inputs. The auxiliary channels are connected using
UA-2109 12 Channel Sub-D Connector Front Panel
The UA-2109 front panel features a single 50-pin Sub-D connector and is primarily for applications where customised non-standard cables are required. USE SCENARIOS General purpose sound and vibration measurements with user-customized cables Direct voltage CCLD accelerometer Charge accelerometer (using charge adaptor) CCLD microphone CCLD tacho Probe Connector type: Sub-D
UA-2108 Triax Accelerometer Front Panels
The UA-2108 front panels features 2 and 4 x 4-pin triax accelerometer connectors. It reduces the number of cables by two thirds when used with CCLD triax accelerometers. USE SCENARIO CCLD triax accelerometer Connector type: -pin Microtech Front panels Compatible LAN-XI modules UA-2108-120 Type 3053-B-120 UA-2108-060 Type 3050-A-060
UA-2107 12 Channel High-Density Front Panel
The UA-2107 is the default front panel for the 12-channel Type 3053 input module. Compact SMB connectors allow for easy connection for direct voltage, CCLD accelerometer, charge accelerometer (using charge adaptor), CCLD microphone and CCLD tacho probe. USE SCENARIOS General purpose sound and vibration measurements Direct voltage CCLD microphone CCLD accelerometer CCLD
UA-2105 Charge Accelerometer Front Panel
The UA-2105 is intended for use with charge accelerometers. It features six slots for direct mounting of up to six In-line Charge Amplifiers, Type 2647. USE SCENARIO Charge accelerometers Connector type: Type 2647 sockets Front panel Compatible LAN-XI modules UA-2105-060 Type 3050-A-060
UA-2104 Sound Intensity Front Panel
The UA-2104 Front Panel is intended for Sound intensity measurements on PULSE using the Sound Intensity Probe Type 3599. Used with an additional connector( BNC) for accessing generator output 2 on LAN-XI type 3160-A-042 or accessing input 6 on LAN-XI type 3050-A-060. USE SCENARIOS Sound intensity measurements using PULSE Selective intensity measurements
UA-2103 6 Channel SUB-D Connector Front Panel
The UA-2103 front panel features a single 37-pin Sub-D connector. It is primarily intended for backwards compatibility with our previous Array Acoustic systems. USE SCENARIOS Array acoustics General purpose sound and vibration measurements with user customized cables. Direct voltage Generator output CCLD accelerometer Charge accelerometer (using charge adaptor) Microphone preamplifier
UA-2102 Generator Front Panels For 200V Microphones
The UA-2102 front panels mixes up to 4 circular 7-pin connectors and 2 BNC connectors. These front panels allow input and conditioning for direct voltage, generator output, CCLD accelerometer, CCLD microphone, CCLD tacho probe (using AO-0091 adaptor cable), charge accelerometer (using in-line charge adaptor –Type 2647 and AO-0091), DC responding
UA-2101 200V Microphone Front Panels
The UA-2101 family is designed to be used in conjunction with microphones that require 200V polarization voltage. It features circular 7-pins (F), LEMO microphone, connectors. Using an adaptor cable (AO-0091) allows for use with a host of other signals and transducers, including direct voltage, CCLD accelerometer, CCLD microphone, CCLD tacho probe
UA-2100 General Purpose Front Panels
The UA-2100 family is the default front panel on 4/6 ch. Input Modules Type 3050, 3-ch. Input Module Type 3052 and Generator, 2/2-ch. Input/Output Module Type 3160-A-022. Industry standard BNC connectors allow easy connection for direct voltage, generator output, CCLD accelerometers, charge accelerometers (using charge adaptor), CCLD microphones, and CCLD
Type 3660-D 11-Modules LAN-XI Frame
The LAN-XI frame Type 3660-D provides a practical solution for test setups where up to 11 LAN-XI modules are required. The multi module LAN-XI docking station provides both power and connectivity as well as a rugged protection for the LAN-XI modules. USE SCENARIOS Large high-density channel systems Modal analysis Field and lab
Type 3660-C 5-Modules LAN-XI Frame
The LAN-XI frame Type 3660-C provides a practical solution for test setups where up to 5 LAN-XI modules are required. The multi module LAN-XI docking station provides both power and connectivity as well as a rugged protection for the LAN-XI modules. USE SCENARIOS Large high-density channel systems Modal analysis Field and lab use
Type 3676 4 Ch. Input Module – LAN-XI Light
LAN-XI Light is a tough data acquisition module that captures time data from up to four channels, and is ideally suited for use with BK Connect Applets, specific tools for specific tasks. This module can be used together with a battery module to create a portable, remote recorder. USE SCENARIOS Any
Type 3161 1 Channel Input + 1 Channel Output Module, 204.8 kHz
LAN-XI Module Type 3161 is specifically designed for high-frequency applications such as transducer calibration and underwater defence applications. The module offers a combination of one input channel and one generator output channel. Both input and output channels have a frequency range of DC to 204.8 kHz. USE SCENARIOS High-frequency sound