Mining
Mining is the extraction of valuable minerals or other geological materials from the earth, usually from an ore body, vein or (coal) seam. Materials recovered by mining include base metals, precious metals, iron, uranium, coal, diamonds, limestone, oil shale, rock salt and potash. Heavy machinery is a common application for sensor technology.
Mining Products:
Mining
TYPE 2719 Power Amplifier
Specifically designed to drive our Type 4808 exciter, this amplifier features an adjustable RMS output-current limit, so that it can be used with smaller shakers. It has a frequency range from DC to 100 kHz and a 14 dB maximum voltage gain. USE SCENARIOS Driving Permanent Magnet Vibration Exciter Type 4808 Safely
LDS SPA-K Power Amplifiers
Similar to the LDS® DPA-K range, these switching power (or switch-mode) amplifiers have been designed to power our medium-force vibration test systems. They have a Class-D rating, offering maximum power with minimal energy waste and, thus, lower running costs. Compatible with third-party shakers, LDS® SPA K amplifiers are modular and scalable, allowing you to
LDS HPA-K Power Amplifier
Featuring the same power module, microprocessor and LCD as the LDS® SPA-K range, this amplifier has been optimized to drive our low-force shakers LDS® V650 and V780 shakers, enabling them to impart higher forces than when paired with other units. With a Class-D rating, it offers maximum power with minimal energy waste and lower running
LDS SPA-K Replacement Amplifiers
These units are intended to replace discontinued LDS® amplifiers that were used to drive older air-cooled shakers, whether LDS or other. Brüel & Kjær offers a wealth of experience in designing power amplifiers to match most shakers available or in operation today. This includes supplying amplifiers to meet the requirements for
LDS LPA Linear Power Amplifiers
Compact and efficient, these stand-alone units are designed for driving our permanent magnet shakers, as well as our low-force shakers, when operated with a separate LDS® FPS Field Power Supply. LDS linear power amplifiers offer low-noise, low-distortion performance and are available in three models, LPA100, LPA600 and LPA1000. USE SCENARIOS Driving LDS permanent magnet
LDS DPA-K Power Amplifiers
Specifically designed to supply LDS® V900 high-force shakers with the signal they require to perform at optimal levels, these amplifiers combine strength, efficiency and adaptability. Featuring a Class-D rating, they deliver maximum power with minimal energy waste and lower running costs. Compatible with third-party vibration systems and suitable for multi-shaker applications,
LDS Fixtures Head Expanders And Thermal Barriers
Part of many vibration test systems, a head expander consists of a large platform that is bolted to the shaker’s load table to increase its effective mounting surface and enable it to test larger or more numerous payloads than those that can be attached to the load table alone.A thermal
LDS LPT Slip Tables Combo Systems With Low-Pressure Tables
Part of many vibration testing systems, a slip table typically consists of a magnesium plate sitting atop a smooth granite block, with a lubricating film in between; both are housed in a frame that connects to the shaker’s armature, enabling it to excite payloads in the horizontal position.Similar to the
LDS HBT Slip Tables Combo Systems With Hydrostatic-Bearing Tables
Part of many vibration testing systems, a slip table typically consists of a magnesium plate sitting atop a smooth granite block, with a lubricating film in between; both are housed in a frame that connects to the shaker’s armature, enabling it to excite payloads in the horizontal position.LDS® Combo Systems with
LDS V406 Permanent Magnet Shaker
Although used in industry for general vibration tests, these shakers are commonly found in universities and research facilities. They combine a wide frequency band and top sine forces, which makes them suitable for a variety of applications: from fatigue and resonance testing of small electronics to studying of biomedical materials
LDS V450 Permanent magnet Shaker
LDS® V450 shakers combine a wide frequency range with impressive acceleration and force ratings, which makes them ideal for a variety of industry applications. They are also widely used in academic and research institutions for applications that include testing of medical devices and investigating the dynamic behaviour of structures and materials.
LDS V101 Permanent Magnet Shaker
These miniature shakers, or vibration generators, have been designed to reproduce a vibration environment under controlled conditions. Although employed in industry, they are also widely used in educational and research institutions to study the dynamic behaviour of structures and materials. They are suitable for a variety of applications, ranging from
LDS V201 Permanent Magnet Shaker
These shakers, or vibration generators, are miniature bench-top units designed to replicate a vibration environment under laboratory conditions. Ideal for a variety of industry applications, they are also extensively used in academic and research institutions to investigate the dynamic behaviour of structures and materials. They are suitable as velocity transducers,
LDS V455 Permanent Magnet Shaker
The LDS® V455 range has been developed to offer you a shaker that features a higher force rating yet is still suitable for laboratory testing. Ideal for industry, they are also used in universities and research institutions for a variety of medical applications and to study the dynamic behaviour of structures
LDS V555 Low-Force Shaker
Designed to reproduce field vibration environments in controlled settings, LDS® V555 is used in R&D in the automotive, aerospace & defence, and consumer electronics industries – where strict standards demand that products be subjected to real-world conditions while ensuring safety during the testing process and confidence in the results. USE SCENARIOS
LDS V650 Low-Force Shaker
LDS® V650 is used within the automotive, aerospace, commercial and defence aviation, and consumer electronics sectors, to reproduce field vibration environments in a controlled manner. It is ideal for R&D and quality assurance tests, where products need to be exposed to real-world conditions while maintaining the rigour and reliability that a
LDS V721 Low-Force Shaker
Designed to re-create field vibration environments in controlled settings, LDS® V721 is used in R&D and quality assurance within the automotive, aerospace & defence, and consumer electronics sectors, where products must be exposed to real-world conditions while ensuring reliability and confidence in the testing process. USE SCENARIOS Testing of automotive components,
LDS V780 Low-Force Shaker
Designed to reproduce field vibration environments in a controlled manner, LDS® V780 is ideal for tests in which articles must be subjected to real-world conditions while maintaining the safety and reliability standards found in laboratories. It is widely used in R&D and quality assurance by the automotive, aerospace and defence, and
LDS V830 Medium-Force Shaker
Widely used in R&D by the automobile and aerospace & defence sectors, LDS® V830 medium-force shakers combine industry-standard ratings and versatility to offer comprehensive solutions for a variety of vibration test scenarios that include general stress screening, product qualification, and product and package testing. USE SCENARIOS Qualification testing of automotive parts
LDS V875 Medium-Force Shaker
This versatile range of medium-force shakers is widely used within the automotive, aerospace, transport and packaging, and defence sectors. Coupling industry-standard performance and flexibility, they offer cost-effective and comprehensive solutions for a range of vibration testing scenarios that include product qualification and reliability tests, general stress screening, and product and