A Division of the Hoskin Group, Canada's Instrumentation Leader
Mining Measurement Solutions Built for Extreme Conditions
Mining is the extraction of valuable minerals or other geological materials from the earth, usually from an ore body, vein or (coal) seam. Materials recovered by mining include base metals, precious metals, iron, uranium, coal, diamonds, limestone, oil shale, rock salt and potash. Heavy machinery is a common application for sensor technology.
Mining Measurement Solutions Built for Extreme Conditions Products:
Mining Measurement Solutions Built for Extreme Conditions
B&K Type 8341 Industrial CCLD Accelerometer, 100 MV/G, Top Connector, Hermetic, Excl. Cable
Type 8341 is a piezoelectric Shear design accelerometer with integral electronics initially developed for in-flight active vibration control on rotor and fixed wing aircraft. USE SCENARIOS In-flight measurements Industrial applications The transducer features case insulation and is hermetically sealed to enclosure protection IP 67. The housing material is stainless steel.
B&K Type 8340 Seismic CCLD Accelerometer, 10 V/G, Top Connector, Excl. Cable
Type 8340 is a piezoelectric annular shear design accelerometer with integral electronics. USE SCENARIO Seismic measurements The transducer features a MIL-C-5015, 2-pin top connector, case isolation and a hermetically sealed stainless steel housing to resist outdoor or humid environments. Type 8340 is mounted by means of a ¼" – 28
B&K Type 8339-001 CCLD Shock Accelerometer, .1 MV/G, Top Connector, Excl. Cable
Types 8339, 8339-001 and 8339-002 are low impedance piezoelectric compression accelerometers intended for measurement of very high-level, continuous vibration, mechanical shock and pyroshock. USE SCENARIO High level mechanical shock and pyroshock measurements (up to 80,000g) The output and ground signal are isolated from the mounting surface to prevent ground loops.
B&K Type 8339 CCLD Shock Accelerometer, .25 MV/G, Top Connector, Excl. Cable
Types 8339, 8339-001 and 8339-002 are low impedance piezoelectric compression accelerometers intended for measurement of very high-level, continuous vibration, mechanical shock and pyroshock. USE SCENARIO High-level mechanical shock and pyroshock measurements (up to 80,000g) The output and ground signal are isolated from the mounting surface to prevent ground loops.
B&K Type 8324-G Piezoelectric Accelerometer Types 8324-G And 8324-G-100
Types 8324-G and 8324-G-001 industrial accelerometer is intended for measurements in harsh environments. USE SCENARIOS Flight test applications Measurement in high-temperature environments Health usage monitoring systems Gas turbines Frequency range: 1 – 9000 Hz Temperature: -196 – 250 C Weight: 91 gram Sensitivity: 1 mV/ms^-2 Residual Noise Level in Spec
B&K Type 8324-100 High-Temperature Industrial Charge Accelerometer
Type 8234-100 is a piezoelectric charge accelerometer based on the shear design principle. The transducer features a ruggedized 2-pin TNC connector (7/16-27 UNS) for the balanced differential output connection. USE SCENARIOS Vibration measurements in harsh industrial environments Aero engines Industrial gas turbines Turbo pumps Nuclear power plants High-temperature (482°C /
B&K Type 8315 Piezoelectric Charge Industrial Accelerometer, Side Connector, Excl. Cable
Accelerometer Type 8315 is designed for permanent vibration monitoring installations in a wide variety of applications. It is intended as a general purpose monitoring transducer. It may be used in areas where there is radiation. USE SCENARIO General purpose monitoring The accelerometer utilises a "shear" construction that significantly reduces transient temperature
B&K Type 8309 Piezoelectric Charge Shock Accelerometer, Integral Side Cable
Type 8309 is a simple, robust construction based on a piezoelectric, centre-mounted, compression design. The transducer features M5 mounting stud and integral cable. USE SCENARIOS Shock and vibration measurement and analysis Vibration monitoring Modal and structural analysis Vibration test control Production and quality control Frequency range: 1 – 54000
B&K Type 8305 Piezoelectric Accelerometer, Incl. Cable
Type 8305 is a piezoelectric accelerometer with side connector. The transducer features two 10 – 32 UNF receptacles for input/output connection. It can be mounted on the object by means of a 10 – 32 UNF threaded steel stud. USE SCENARIOS Calibration traceable to the National Institute of Standards and
B&K Type 5958-A Underwater Accelerometer, 1 MV/M/S2 BNC-Connector
This rugged accelerometer is suitable for most practical vibration measurements in wet or seawater conditions, such as seabed installations, submersible craft, offshore oil installations, sea-going vessels etc. USE SCENARIOS Underwater measurements to 450metres depth Measurement in harsh environments - wet, submerged, or oily environments Also, it is ideal for monitoring machines
B&K Type 4575 Accelerometer DC Response, 2G, 1000 MV/G
The DC Response Accelerometers are designed to measure low-frequency vibration down to DC. The gas- damped sensing element offers a wide dynamic range and very stable frequency response even after subjection to high shock levels. USE SCENARIOS Low-frequency, motion and tilt measurements Flight testing Road load testing Transportation Modal analysis
B&K Type 4574 Accelerometer DC Response, 10G, 200 MV/G
The DC Response Accelerometers are designed to measure low-frequency vibration down to DC. The gas- damped sensing element offers a wide dynamic range and very stable frequency response even after subjection to high shock levels. Looking to buy Accelerometers? Here is a partial list of scenarios for things you can
B&K Type 4573 Accelerometer DC Response, 30G, 67 MV/G
The DC Response Accelerometers are designed to measure low-frequency vibration down to DC. The gas- damped sensing element offers a wide dynamic range and very stable frequency response even after subjection to high shock levels. USE SCENARIOS Low-frequency, motion and tilt measurements Flight testing Road load testing Transportation Modal analysis
B&K Type 4572 Accelerometer DC Response, 100G, 20 MV/G
The DC Response Accelerometers are designed to measure low-frequency vibration down to DC. The gas- damped sensing element offers a wide dynamic range and very stable frequency response even after subjection to high shock levels. USE SCENARIOS Low-frequency, motion and tilt measurements Flight testing Road load testing Transportation Modal analysis
B&K Type 4571 Accelerometer DC Response, 200G, 10 MV/G
The DC Response Accelerometers are designed to measure low-frequency vibration down to DC. The gas- damped sensing element offers a wide dynamic range and very stable frequency response even after subjection to high shock levels. USE SCENARIOS Low-frequency, motion and tilt measurements Flight testing Road load testing Transportation Modal analysis
B&K Type 4570 Accelerometer DC Response, 500G, 4 MV/G, Integral Open Ended Cable
The DC Response Accelerometers are designed to measure low-frequency vibration down to DC. The gas- damped sensing element offers a wide dynamic range and very stable frequency response even after subjection to high shock levels. USE SCENARIOS Low-frequency, motion and tilt measurements Flight testing Road load testing Transportation Modal analysis
B&K Type 4535-B-001 General-Purpose Triaxial CCLD Accelerometer, TEDS, 98 MV/G, Excl Cable
Triaxial CCLD accelerometer with Transducer Electronic Datasheet (TEDS) Type 4535-B-001 is designed to simplify your testing by covering most of the different needs of a modern test lab with one sensor. USE SCENARIOS General purpose Structural testing Automotive body and power train measurements Acoustic fatigue testing Triaxial measurements in a
B&K Type 4535-B General-Purpose Triaxial CCLD Accelerometer, TEDS, 9.8 MV/G, Excl Cable
Triaxial CCLD Accelerometer with Transducer Electronic Datasheet (TEDS) Type 4535-B is designed to simplify your testing by covering most of the different needs of a modern test lab with one sensor. USE SCENARIOS General purpose Structural testing Automotive body and power train measurements Acoustic fatigue testing Triaxial measurements in a confined
B&K Type 4534-B-002 CCLD Accelerometer, 50 MV/MS^-2
Type 4534-B-002 is a general purpose CCLD accelerometer, with TEDS. It has a wide frequency range, low noise, and low sensitivity to environmental factors. USE SCENARIO General purpose vibration measurement Type 4534-B-002 has a lightweight, robust, hermetically sealed titanium housing, an insulated base and a 10–32 UNF threaded mounting holeB&K Type 4534-B-001 CCLD Accelerometer, 10 MV/MS^-2
The general purpose CCLD Accelerometer, Type 4534-B-001, has a wide frequency range, low noise, and low sensitivity to environmental factors. The accelerometer has TEDS. USE SCENARIO General purpose vibration measurement The accelerometer has a lightweight, robust, hermetically sealed titanium housing, an insulated base and a 10–32 UNF threaded mounting hole
B&K Type 4534-B CCLD Accelerometer, 1 MV/MS^-2
The general purpose CCLD Accelerometer with TEDS, Type 4534-B, has a wide frequency range, low noise, and low sensitivity to environmental factors. USE SCENARIO General purpose vibration measurement Each unit features a lightweight, robust, hermetically sealed titanium housing, an insulated base and a 10–32 UNF threaded mounting hole suitable for