Forestry
Forestry is the art and science of managing forests, tree plantations, and related natural resources. Modern forestry generally concerns itself with: assisting forests to provide timber as raw material for wood products.
Forestry Products:
Forestry
AKA-300-LC Triaxial MEMS Accelerometer
Jewell Instruments AKA Series Accelerometers are an excellent choice for cost to performance trade-off. The AKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability. SC version 0-5V output LC version 4-20mA output FEATURES Triaxial Configuration Measuring ranges of ±2G thru
ECV – eCompass Series
The ECV eCompass Series is a 3D electronic compass providing stable azimuth, pitch, and roll measurements in dynamic conditions. As an enhanced version of our ECG Series, the ECV includes a full suite of precision, 3-axis, MEMS sensors, and an optional dual-axis electrolytic tilt sensor, for the ultimate in near-level accuracy. A high-performance
ECS – eCompass Series
The ECS digital compass represents the state-of-the-art in magnetic compassing. It combines a precision 3-axis solid-state magnetometer and a rugged 2-axis electrolytic tilt sensor to provide accurate heading and tilt measurements over a wide range of environmental conditions. The firmware and signal processing algorithms have been refined and improved over
ECL – eCompass Series
The ECL low-power digital compass is designed specifically for commercial, industrial, and military users. The ECL series will be of particular interest to ROV and AUV manufacturers who are concerned with power usage and accurate heading in all types of challenging conditions. In standby mode, it draws a mere 50
ECG – eCompass Series
If your compass application involves vibration, acceleration, uneven terrain, or rough seas, the ECG Series, a gyro-stabilized electronic compass, is an uncompromising solution that will outperform rival units that cost more. The ECG provides remarkably accurate heading, pitch, and roll in dynamic conditions. It all starts with a precision 3-axis
ECC – 2D – eCompass Series
The ECC-2D Series is a low-cost 2D digital compass in a small package with low power consumption and high reliability designed for commercial and industrial users. FEATURES: Heading accuracy: ±1° Hard & soft iron magnetic compensation Wide operating temp range: -40° to +85°C Low-cost electronic compass RS-232, RS-485, and TTL
2161 High Capacity Column Load Cell – Compression Only
Model 2161 is a column compression only load cell typically used in higher force applications. Options Available for 2nd Bridge. FEATURES • Capacities from 300K to 1000K (1335 to 4450 kN) • Performance to ±0.15% FS • Compact size • Metric and English models • Screw in handles OPTIONS •
Acuity Laser Touch Panel Display
The Acuity™ 7” Touch Panel Display is a stand-alone industrial PC interface for use with Acuity laser distance sensors. These fully enclosed units replace panel meters, alphanumeric displays and analog controllers by providing a modern interface through a full-color LCD and touch screen. The Touch Panel Display communicates with one
AR550 High Speed Laser Position Sensor
The AR550 high speed laser sensor is Acuity’s fastest triangulation device for dimensional and distance measurement. At sampling rates up to 70kHz, these sensors are typically used for applications that demand high speed such as vibration measurements, scanning of roads, vehicle crash test, and ballistic measurements. Industry Leading Speed
SomatXR CX27C-R Ultra-Ruggedized Gateway Interface
SomatXR CX27C-R: Parallel Data Analysis and Automation via EtherCAT® and PROFINET IRT The SomatXR CX27C-R Industrial Ethernet gateway enables the integration of up to 199 signals from up to 24 SomatXR modules into a measurement chain, which can also be simultaneously acquired in real time. It is, therefore, perfectly suitable
MONI LOG® MicroShockDetector_PLUS
Compact, light-weight shock data logger Registers the 200 largest shock events in the X, Y, Z direction Saves up to 10 curve progressions of the largest shocks Intelligent signal filtering and evaluation Indicates limit value overruns with alarm LED Continuous recording of temperature, humidity, air pressure, light Intuitive operation, extremely
DMH Series – High-Performance Digital MEMS Inclinometer
The Jewell Instruments model DMH is a high precision MEMS inclinometer. Units are available with RS232, RS422, RS485 and UART TTL options. All DMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request. FEATURES • Single-Axis and Dual-Axis
AMS Series – Mid-Level MEMS Inclinometer
The Jewell Instruments model AMS is a mid-level performance analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up to 1m. Custom ranges and output types are also available on request. FEATURES •
AMH Series – High Precision MEMS Inclinometer
The Jewell Instruments model AMH is a high precision MEMS inclinometer. Standard units are available with 0-5V, 0.5-4.5V, or 4-20mA output options. All AMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request. FEATURES • Single-Axis and Dual-Axis
AMI Series – MEMS Inclinometer – Temp Corrected
The model AMI is a high precision MEMS inclinometer with built-in thermal compensation. Standard units come with 0-5V, 0.5-4.5V or 4-20mA output options. All AMI series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request. FEATURES • Single-Axis and
AML Series – MEMS Inclinometer
The Jewell Instruments model AML is a low cost analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up to 1m. Custom ranges and output types are also available on request. FEATURES •
JMI-L Series MEMS Inclinometer
The JMI-100/200 series is available in single (JMI-100) and dual (JMI-200) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology. 4-20mA output version With a lightweight aluminum enclosure, the JMI is conducive to many OEM applications and with an
JMA-165-RH Series MEMS Accelerometer – Heater Version – CENELEC / AREMA
The Jewell Instruments JMA-165 MEMS accelerometers are a cost effective and viable alternative to traditional force balance designs. This mighty little sensor is CENELEC, AREMA certified, and RoHS compliant. With options for heated or non-heated, and available filtering, you can customize the perfect sensor for your application. FEATURES ±0.5JMA-165-R Series MEMS Accelerometer – Non-Heater Version – CENELEC / AREMA
The Jewell Instruments JMA-165 MEMS accelerometers are a cost effective and viable alternative to traditional force balance designs. This mighty little sensor is CENELEC, AREMA certified, and RoHS compliant. With options for heated or non-heated, and available filtering, you can customize the perfect sensor for your application. FEATURES ±0.5
AMA Series MEMS Accelerometer
Jewell Instruments AMA Series Accelerometers are an excellent choice for cost to performance trade off. The AMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability. Analog output. FEATURES Single, Dual and Triaxial Configuration Excellent long term stability Ruggedized for harsh