Forestry
Forestry is the art and science of managing forests, tree plantations, and related natural resources. Modern forestry generally concerns itself with: assisting forests to provide timber as raw material for wood products.
Forestry Products:
Forestry
EOLIS 3000 Dual Process Input Convertor Module
The DUAL CHANNEL, INDEPENDENTLY ISOLATED design of EOLIS 3000 allows the realization of two converters in a 22.5mm case. EOLIS 3000 is a converter of process inputs (0-20 mA; 4 -20 mA, 0-100mv - 0-1V; 0-10V) or of resistive inputs or PT100 2 wires, 2 analog outputs and up to
JK 3000 Process Input Module
The JK 3000 series allows the isolation and conditioning of analog signals. Single Process Input: (0-20mA, 4-20mA, 0-100mV, 0-10V, +/-10V, other values on request up to 1000V). Single or Dual Output of (0-20mA, 4-20mA, 0-10V); +/-10V available only on output 2. With the lightning shock protection option, the converter protects
JK 7000 Potentiometric Input Module
In order to respond to the problems of isolation and transmission of a potentiometric signal, JM concept has developed 2 analog converters with potentiometer input. Analog technology allows signal processing with a response time of less than ms. The use of high performance components in a wide temperature range guarantees
TELIS 1000 Bridge Input Module
TELIS 1000 is a converter from the TELIS range dedicated to measurements with a gauge bridge, coupled with a sensor power supply, a digital input, one or 2 analog outputs and up to 2 relays and an RS485 communication port Modbus RTU. TELIS 1000 is an isolated converter (quadruple galvanic
TELIS 9000 Universal Input Module
TELIS 9000 is a universal converter for Current (direct), Voltage, (direct), Variable resistance probe, Thermocouple, Potentiometer, 2-wire resistance, Special table for NTC PTC) coupled with a sensor supply for each input, one or 2 isolated analog outputs and up to 4 relays and an RS485 Modbus RTU communication port. TELIS
LINE series data concentrators
JM Concept has developed an interfacing system to decentralize the analog inputs and outputs and to send the data back via fieldbus. The principle is based on JM Concept's analog signal processing and isolation technology. The system is fully modular and scalable. The inputs can be process inputs as well as
UHLIS 3000 Multi-channel input module
UHLIS allows the acquisition of 4 simultaneous channels in a 22.5mm case, reducing the footprint to less than 6mm each. Its 4 channel isolated Current or Voltage inputs each benefit from an independent sensor power supply that can be activated by switch. Modbus TCP connection via an RJ45 allows for
INF-USB3 USB Single Channel PC Interface Module
Sensor to USB Output Converter Model INF-USB3 PC Interface Module makes any Load Cell USB Compatible. This product provides an easy interface for collecting data from an Interface transducer directly into your computer. Included software works well for convenient testing and monitoring applications benefiting from immediate evaluation or collection for
INF4 – Ethernet TCP IP – Multi-Channel Sensor Weight Transmitter
The Interface INF4-Ethernet TCP IP Two, Three, and Four Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES Ethernet TCP/IP port Type: RJ45 10Base-T or 100Base-TX (auto-sensing) The
INF4 – Ethernet IP – Multi-Channel Sensor Weight Transmitter
The Interface INF4-Ethernet IP Two, Three, and Four Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES 2x Ethernet/IP ports Type: RJ45 10Base-T or 100Base-TX (auto-sensing) The instrument
INF4 – Modbus TCP – Multi-Channel Sensor Weight Transmitter
The Interface INF4-Modbus TCP Two, Three, and Four Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES Modbus/TCP port Type: RJ45 10Base-T or 100Base-TX (auto-sensing) The instrument works
INF4 – RS485- Multi-Channel Sensor Weight Transmitter
The Interface INF4-RS485 Two, Three, and Four Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES Baud rate: 2400, 4800, 9600, 19200, 38400, 115200 (bit/s) RS485 serial port
INF4 – Analog – Multi-Channel Sensor Weight Transmitter
The Interface INF4-Analog Two, Three, and Four Sensor Weight Transmitter and Indicator with six-digit red LED display (8 mm height). Space saving compact design. Four buttons for the system calibration. Six indicator led. Dimensions: 26 x 115 x 120 mm. With 4 independent reading channels for load cells (individual load
INF1 – Ethernet IP – Single Sensor Weight Transmitter
The Interface INF1-Ethernet IP Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES 2x Ethernet/IP ports Type: RJ45 10Base-T or 100Base-TX (auto-sensing) The instrument works as adapter
INF1 – Ethernet TCP IP – Single Sensor Weight Transmitter
The Interface INF1-Ethernet TCP IP Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES Ethernet TCP/IP port Type: RJ45 10Base-T or 100Base-TX (auto-sensing) The instrument works in
INF1 – Modbus TCP – Single Sensor Weight Transmitter
The Interface INF1-Modbus TCP Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES Modbus/TCP port Type: RJ45 10Base-T or 100Base-TX (auto-sensing) The instrument works as slave in
INF1 – RS485 – Single Sensor Weight Transmitter
The Interface INF1-RS485 Single Sensor Weight Transmitter and Indicator has a six-digit red LED display (8 mm height), space saving compact design, four buttons for the system calibration, and a six indicator led. FEATURES Baud rate: 2400, 4800, 9600, 19200, 38400, 115200 (bit/s) RS485 serial port for communication via
INF1 – Analog – Single Sensor Weight Transmitter
The Interface INF1-Analog Single Sensor Weight Transmitter and Indicator with six-digit red LED display (8 mm height). Space saving compact design. Four buttons for the system calibration. Six indicator led. Dimensions: 25 x 115 x 120 mm. FEATURES 16-bit Analog output: 0-20mA, 4-20mA, 0-5V, 0-10V, +/-5V, +/-10V Connection to:
AKA-300-SC Triaxial MEMS Accelerometer
Jewell Instruments AKA Series Accelerometers are an excellent choice for cost to performance trade-off. The AKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability. SC version 0-5V output LC version 4-20mA output FEATURES Triaxial Configuration Measuring ranges of ±2G thruAKA-300-LC Triaxial MEMS Accelerometer
Jewell Instruments AKA Series Accelerometers are an excellent choice for cost to performance trade-off. The AKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability. SC version 0-5V output LC version 4-20mA output FEATURES Triaxial Configuration Measuring ranges of ±2G thru