A Division of the Hoskin Group, Canada's Instrumentation Leader
Food & Pharmaceuticals
The food and pharmaceutical industries develop, produce, and market either food or drugs (licensed for use as medications). System controls and automation and implemented to improve product quality control and manufacturing throughput.
Food & Pharmaceuticals Products:
Food & Pharmaceuticals
Type 8430 (Replaces Types 8781 And 7761) BK Connect Array Analysis
This application acquires acoustic data for noise source location applications and creates sound maps using sound intensity and sound pressure overlain with a synchronous video. BK Connect Array Analysis is the start point for all array and multipoint tasks and supports all aspects of the measurement process, including measurement control,
BZ-6047 Automotive Vehicle Sound Quality Software
This PULSE software analyses product sound quality using parameters that closely relate to the complete human experience of the sound, rather than using purely physical quantities such as sound pressure. The software can analyse real-time measurements using sound quality metrics such as ‘loudness’. In use, you can dissect the sound
B&K Type 4507-001 Piezoelectric CCLD Accelerometer, 0.1MV/G, Side Connector, 1 Slot, Excl. Cable
Miniature CCLD Accelerometers Types 4507 and 4508 are specifically designed to withstand the rough environment of the automotive industry. A combination of high sensitivity, low mass and small physical dimensions make them ideal for modal measurements, such as automotive body and power-train measurements, as well as for modal analysis on aircraft,
B&K Type 8230-003 DeltaTron Force Transducer
Type 8230-003 is a force transducer with integral electronics designed for dynamic, short-duration static and impact force measurements. It is typically used for measuring applied forces in modal applications, for example, inserted directly between an exciter and the test structure or for general-purpose force measurements within process applications. USE SCENARIOS
B&K Type 8230-002 DeltaTron Force Transducer
Type 8230-002 is a force transducer with integral electronics designed for dynamic, short-duration static and impact force measurements. It is typically used for measuring applied forces in modal applications, for example, inserted directly between an exciter and the test structure or for general-purpose force measurements within process applications. USE SCENARIOS
B&K Type 8230-001 DeltaTron Force Transducer
Type 8230-001 is a force transducer with integral electronics designed for dynamic, short-duration static and impact force measurements. It is typically used for measuring applied forces in modal applications, for example, inserted directly between an exciter and the test structure or for general-purpose force measurements within process applications. USE SCENARIOS
B&K Type 8230 DeltaTron CCLD Force Transducer
Type 8230 is a force transducer with integral electronics designed for dynamic, short-duration static and impact force measurements. It is typically used for measuring applied forces in modal applications, for example, inserted directly between an exciter and the test structure or for general-purpose force measurements within process applications. USE SCENARIOS
B&K Type 8347-C Piezoelectric Charge High-Temperature Industrial Accelerometer
Type 8347-C is a piezoelectric, shear design, charge accelerometer. USE SCENARIOS Vibration measurements in harsh industrial environments Aero engines Industrial gas turbines Turbo pumps Nuclear power plants High-temperature (482°C / 900°F) applications Cryogenic applications Gearboxes Health Usage Monitoring Systems (HUMS) The transducer features a ruggedised 2-pin TNC connector (7/16-27 UNS)
B&K Type 8346-C Piezoelectric Charge Accelerometer
Type 8346-C is a piezoelectric DeltaShear® charge accelerometer. USE SCENARIO Low-level vibration measurement The transducer features a 10-32 UNF output connector on the top, and it can be mounted on the object by means of a 10-32 UNF threaded steel stud. Frequency range: 0.1 – 3000 Hz Temperature: -50 –
B&K Type 8345 Triaxial CCLD Accelerometer
Triaxial CCLD Accelerometer Type 8345 is designed to operate in harsh environments. USE SCENARIOS Measurement in harsh environments Triaxial measurements Permanently installed machine condition monitoring Its 4-pin Glenair® 800-series connector is robust for industrial applications. The 3 × M4 holes forming an isosceles triangle on the mounting surface secure the mounting
B&K Type 8344 Piezoelectric Accelerometer, TEDS
Type 8344 is a piezoelectric DeltaShear® accelerometer with integral electronics. USE SCENARIOS Low-level measurement Low noise High sensitivity It can be mounted on a test object with a M5 threaded steel stud. The transducer is hermetically sealed, with a Transducer Electronic Data Sheet (TEDS) containing sensor- and application-specific information, including frequency
B&K Type 8341 Industrial CCLD Accelerometer, 100 MV/G, Top Connector, Hermetic, Excl. Cable
Type 8341 is a piezoelectric Shear design accelerometer with integral electronics initially developed for in-flight active vibration control on rotor and fixed wing aircraft. USE SCENARIOS In-flight measurements Industrial applications The transducer features case insulation and is hermetically sealed to enclosure protection IP 67. The housing material is stainless steel.
B&K Type 8340 Seismic CCLD Accelerometer, 10 V/G, Top Connector, Excl. Cable
Type 8340 is a piezoelectric annular shear design accelerometer with integral electronics. USE SCENARIO Seismic measurements The transducer features a MIL-C-5015, 2-pin top connector, case isolation and a hermetically sealed stainless steel housing to resist outdoor or humid environments. Type 8340 is mounted by means of a ¼" – 28
B&K Type 8339-001 CCLD Shock Accelerometer, .1 MV/G, Top Connector, Excl. Cable
Types 8339, 8339-001 and 8339-002 are low impedance piezoelectric compression accelerometers intended for measurement of very high-level, continuous vibration, mechanical shock and pyroshock. USE SCENARIO High level mechanical shock and pyroshock measurements (up to 80,000g) The output and ground signal are isolated from the mounting surface to prevent ground loops.
B&K Type 8339 CCLD Shock Accelerometer, .25 MV/G, Top Connector, Excl. Cable
Types 8339, 8339-001 and 8339-002 are low impedance piezoelectric compression accelerometers intended for measurement of very high-level, continuous vibration, mechanical shock and pyroshock. USE SCENARIO High-level mechanical shock and pyroshock measurements (up to 80,000g) The output and ground signal are isolated from the mounting surface to prevent ground loops.
B&K Type 8324-G Piezoelectric Accelerometer Types 8324-G And 8324-G-100
Types 8324-G and 8324-G-001 industrial accelerometer is intended for measurements in harsh environments. USE SCENARIOS Flight test applications Measurement in high-temperature environments Health usage monitoring systems Gas turbines Frequency range: 1 – 9000 Hz Temperature: -196 – 250 C Weight: 91 gram Sensitivity: 1 mV/ms^-2 Residual Noise Level in Spec
B&K Type 8324-100 High-Temperature Industrial Charge Accelerometer
Type 8234-100 is a piezoelectric charge accelerometer based on the shear design principle. The transducer features a ruggedized 2-pin TNC connector (7/16-27 UNS) for the balanced differential output connection. USE SCENARIOS Vibration measurements in harsh industrial environments Aero engines Industrial gas turbines Turbo pumps Nuclear power plants High-temperature (482°C /
B&K Type 8315 Piezoelectric Charge Industrial Accelerometer, Side Connector, Excl. Cable
Accelerometer Type 8315 is designed for permanent vibration monitoring installations in a wide variety of applications. It is intended as a general purpose monitoring transducer. It may be used in areas where there is radiation. USE SCENARIO General purpose monitoring The accelerometer utilises a "shear" construction that significantly reduces transient temperature
B&K Type 8309 Piezoelectric Charge Shock Accelerometer, Integral Side Cable
Type 8309 is a simple, robust construction based on a piezoelectric, centre-mounted, compression design. The transducer features M5 mounting stud and integral cable. USE SCENARIOS Shock and vibration measurement and analysis Vibration monitoring Modal and structural analysis Vibration test control Production and quality control Frequency range: 1 – 54000
B&K Type 8305 Piezoelectric Accelerometer, Incl. Cable
Type 8305 is a piezoelectric accelerometer with side connector. The transducer features two 10 – 32 UNF receptacles for input/output connection. It can be mounted on the object by means of a 10 – 32 UNF threaded steel stud. USE SCENARIOS Calibration traceable to the National Institute of Standards and
B&K Type 5958-A Underwater Accelerometer, 1 MV/M/S2 BNC-Connector
This rugged accelerometer is suitable for most practical vibration measurements in wet or seawater conditions, such as seabed installations, submersible craft, offshore oil installations, sea-going vessels etc. USE SCENARIOS Underwater measurements to 450metres depth Measurement in harsh environments - wet, submerged, or oily environments Also, it is ideal for monitoring machines