A Division of the Hoskin Group, Canada's Instrumentation Leader
Manufacturing
Industrial production, in which raw materials are transformed into finished goods on a large scale. Modern manufacturing includes all intermediate processes required for the production and integration of a product's components. The manufacturing sector is closely connected with engineering and industrial design. Common categories include, chemical, pharmaceutical, tire, automobiles, food and beverage etc.
Manufacturing Products:
Manufacturing
UL-0265 PULSE Measurement System Switch
Eight-port LAN-switch with PoE and PTPv2 support. 10/100/1000Mbps network switch that can power up to 8 LAN-XI modules. Data transfer and synchronization of LAN-XI modules Powering of up to eight LAN-XI modules, each using a single twisted-pair Ethernet cable Distributed PULSE™ measurement setups Configured specifically for optimum PULSE measurement performance:
UA-2204 19″ Rack Mounting Kit For 3660-D Frame
Mounting kit consists of all parts required to easily mount the 3660-D frame in a 19-inch rack.
UA-2203 Blank Module For LAN-XI Type 3660 Frame
Designed to fill non-used slots in the Type 3660 C or D frame to protect backplane connectors. Empty frame slots can be utilized to store accessories and cables.
KE-4333 Sonoscout Case
Practical hard case for LAN-XI items required for Sonoscout. Also suitable as a case for LAN-XI Notar and portable PULSE systems.
AO-1490 Type 3660 DC Power Cable
DC power cable to be used between a DC source and the 3660-D and 3660-C Frames. Length 3.0 m.
AO-1489 DC Power Cable For Car
Used between a car utility socket and aType 3660-C or D frame. Length: 3.0 m.
AO-1450 Ethernet Cable
Standard CAT 6 LAN cable to be used between a module and a PC. Available in 2m, 10m and 30m. Cable is delivered with each LAN-XI module.
AO-0738 Cable For Type 3056
Cable for LAN-XI Type 3056, 2x circular 10-pin (M) to 8x BNC (F) 1,0m (3.3ft) max.+70°C (158°F).
AO-0548 DC Cable To Power LAN-XI
DC power cable to be used between a DC power source and 4 LAN-XI modules.
AO-0546 LAN-XI Power Cable For Car
DC power cable to be used between a car utility socket and any LAN-XI module.
Type 3660-A 1-Module Wireless LAN Frame
Type 3660-A creates a wireless data acquisition front-end by connecting one LAN-XI input module and one LAN-XI Battery Module Type 2831 together. It allows you to stream data wirelessly from any LAN-XI module, giving you the freedom to move your hardware around without cabling. USE SCENARIOS Sonoscout front-end In-vehicle NVH
UA-3102 Generator For 200 V Microphone
UA-3102-042 is designed for use with Generator, 4/2-ch. Input/Output Module Type 3160-A-042. USE SCENARIOS Microphones requiring 200 V external polarization General purpose sound and vibration measurements Direct voltage CCLD accelerometers DC responding accelerometers CCLD microphones CCLD tacho probes Connector type: BNC and LEMO Front panel Compatible LAN-XI modules UA-3102-042
UA-3101 CAN Bus Module Front Panel
UA-3101-080 is the default front panel for LAN-XI CAN Bus Module Type 3058-080, having two independent CAN Bus input connectors. This front panel is ideal for automotive noise, vibration and harshness (NVH) applications. USE SCENARIOS CAN Bus applications, including in-vehicle measurements using Sonoscout Automotive sound quality metrics General sound and
UA-3100 Generator, General Purpose Module
UA-3100-042 is designed for use with Generator, 4/2-ch. Input/Output Module Type 3160-A-042. USE SCENARIOS General purpose sound and vibration measurements Direct voltage CCLD microphones CCLD accelerometers CCLD tacho probes Generator output Connector type: BNC Front panel Compatible LAN-XI modules UA-3100-042 Type 3160-A-042
UA-2145 Array Front Panel For 11 LAN-XI Modules
The Array front panel for LAN-XI UA-2145 is intended for use with hand-held microphone arrays together with a LAN-XI Frame 3660-D. USE SCENARIOS Noise source identification using mapping techniques in conjunction with Acoustic Holography Calculations, Conformal Mapping Calculations and a 3D positioning system Suitable for use with Handheld Arrays: Type
UA-2121 Bridge Module Front Panel
UA‐2121‐030 is the front panel used with LAN‐XI Bridge Module Type 3057‐B‐030. The front‐panel has 3 × 15‐pin sub‐D connectors which allow individual configurations of completion resistors to be made directly on the cable plug. USE SCENARIOS Bridge sensor measurements: 1/1, 1/2, 1/4 bridge strain gauges Strain gauge based sensors
UA-2120 6 Channel Charge Input Front Panel
The UA-2120-060 allows up to six charge type transducers to be connected directly to the LAN-XI frontend, simplifying setup and performance. USE SCENARIO Charge type transducers: Accelerometers, pressure sensors, hydrophones The frontpanel has six integrated charge amplifiers, each with a fixed gain of 0dB (-1mV/pC) and a fixed High-Pass Filter
UA-2119 6 Channel Differential Charge Input Front Panel
The UA-2119-060 allows up to six differential charge accelerometers, such as Type 8347-C, to be connected directly to the LAN-XI frontend, simplifying set-up and optimising performance. USE SCENARIOS Differential charge accelerometers Environments with high levels of electromagnetic noise Applications where good ground connections is difficult to achieve High immunity for
UA-2118 Headphone Test, 2 + 2 Channel LAN-XI Front Panel
UA-2118-022 is a dedicated analogue interface for headphone testing allowing simultaneous testing of left and right headphones. A three-position switch on the front panel switches the output of Generator 1 between left earphone, both earphones and right earphone. USE SCENARIO Testing of headphones, small loudspeakers and receivers Connector type: LEMO,
UA-2117 Generator Front Panel For 200 kHz LAN-XI Module
The UA-2117-011 is the default front panel for the 200 kHZ LAN-XI module Type 3161-A-011. USE SCENARIOS High-frequency sound and vibration measurements Underwater acoustics applications High-energy impact measurements High-frequency system excitation and transducer calibration The front panel has three different input connectors, BNC/ LEMO/ TNC, that allow connectivity for a
UA-2116 12 Channel Charge Input Front Panel
The UA-2116-120 allows up to 12 charge type transducers to be connected directly to the LAN-Xi front end, simplifying the setup and the performance. USE SCENARIOS Charge type transducers: Accelerometers, pressure sensors, hydrophones Combustion pressure monitoring on up to 12-cylinder engines High channel count charge accelerometer applications Ideal for high