A Division of the Hoskin Group, Canada's Instrumentation Leader
Food & Pharmaceuticals
The food and pharmaceutical industries develop, produce, and market either food or drugs (licensed for use as medications). System controls and automation and implemented to improve product quality control and manufacturing throughput.
Food & Pharmaceuticals Products:
Food & Pharmaceuticals
UL-0265 PULSE Measurement System Switch
Eight-port LAN-switch with PoE and PTPv2 support. 10/100/1000Mbps network switch that can power up to 8 LAN-XI modules. Data transfer and synchronization of LAN-XI modules Powering of up to eight LAN-XI modules, each using a single twisted-pair Ethernet cable Distributed PULSE™ measurement setups Configured specifically for optimum PULSE measurement performance:
UA-2204 19″ Rack Mounting Kit For 3660-D Frame
Mounting kit consists of all parts required to easily mount the 3660-D frame in a 19-inch rack.
UA-2203 Blank Module For LAN-XI Type 3660 Frame
Designed to fill non-used slots in the Type 3660 C or D frame to protect backplane connectors. Empty frame slots can be utilized to store accessories and cables.
KE-4333 Sonoscout Case
Practical hard case for LAN-XI items required for Sonoscout. Also suitable as a case for LAN-XI Notar and portable PULSE systems.
AO-1490 Type 3660 DC Power Cable
DC power cable to be used between a DC source and the 3660-D and 3660-C Frames. Length 3.0 m.
AO-1489 DC Power Cable For Car
Used between a car utility socket and aType 3660-C or D frame. Length: 3.0 m.
AO-1450 Ethernet Cable
Standard CAT 6 LAN cable to be used between a module and a PC. Available in 2m, 10m and 30m. Cable is delivered with each LAN-XI module.
AO-0738 Cable For Type 3056
Cable for LAN-XI Type 3056, 2x circular 10-pin (M) to 8x BNC (F) 1,0m (3.3ft) max.+70°C (158°F).
AO-0548 DC Cable To Power LAN-XI
DC power cable to be used between a DC power source and 4 LAN-XI modules.
AO-0546 LAN-XI Power Cable For Car
DC power cable to be used between a car utility socket and any LAN-XI module.
Type 3660-A 1-Module Wireless LAN Frame
Type 3660-A creates a wireless data acquisition front-end by connecting one LAN-XI input module and one LAN-XI Battery Module Type 2831 together. It allows you to stream data wirelessly from any LAN-XI module, giving you the freedom to move your hardware around without cabling. USE SCENARIOS Sonoscout front-end In-vehicle NVH
UA-3102 Generator For 200 V Microphone
UA-3102-042 is designed for use with Generator, 4/2-ch. Input/Output Module Type 3160-A-042. USE SCENARIOS Microphones requiring 200 V external polarization General purpose sound and vibration measurements Direct voltage CCLD accelerometers DC responding accelerometers CCLD microphones CCLD tacho probes Connector type: BNC and LEMO Front panel Compatible LAN-XI modules UA-3102-042
UA-3101 CAN Bus Module Front Panel
UA-3101-080 is the default front panel for LAN-XI CAN Bus Module Type 3058-080, having two independent CAN Bus input connectors. This front panel is ideal for automotive noise, vibration and harshness (NVH) applications. USE SCENARIOS CAN Bus applications, including in-vehicle measurements using Sonoscout Automotive sound quality metrics General sound and
UA-3100 Generator, General Purpose Module
UA-3100-042 is designed for use with Generator, 4/2-ch. Input/Output Module Type 3160-A-042. USE SCENARIOS General purpose sound and vibration measurements Direct voltage CCLD microphones CCLD accelerometers CCLD tacho probes Generator output Connector type: BNC Front panel Compatible LAN-XI modules UA-3100-042 Type 3160-A-042
UA-2145 Array Front Panel For 11 LAN-XI Modules
The Array front panel for LAN-XI UA-2145 is intended for use with hand-held microphone arrays together with a LAN-XI Frame 3660-D. USE SCENARIOS Noise source identification using mapping techniques in conjunction with Acoustic Holography Calculations, Conformal Mapping Calculations and a 3D positioning system Suitable for use with Handheld Arrays: Type
UA-2121 Bridge Module Front Panel
UA‐2121‐030 is the front panel used with LAN‐XI Bridge Module Type 3057‐B‐030. The front‐panel has 3 × 15‐pin sub‐D connectors which allow individual configurations of completion resistors to be made directly on the cable plug. USE SCENARIOS Bridge sensor measurements: 1/1, 1/2, 1/4 bridge strain gauges Strain gauge based sensors
UA-2120 6 Channel Charge Input Front Panel
The UA-2120-060 allows up to six charge type transducers to be connected directly to the LAN-XI frontend, simplifying setup and performance. USE SCENARIO Charge type transducers: Accelerometers, pressure sensors, hydrophones The frontpanel has six integrated charge amplifiers, each with a fixed gain of 0dB (-1mV/pC) and a fixed High-Pass Filter
UA-2119 6 Channel Differential Charge Input Front Panel
The UA-2119-060 allows up to six differential charge accelerometers, such as Type 8347-C, to be connected directly to the LAN-XI frontend, simplifying set-up and optimising performance. USE SCENARIOS Differential charge accelerometers Environments with high levels of electromagnetic noise Applications where good ground connections is difficult to achieve High immunity for
UA-2118 Headphone Test, 2 + 2 Channel LAN-XI Front Panel
UA-2118-022 is a dedicated analogue interface for headphone testing allowing simultaneous testing of left and right headphones. A three-position switch on the front panel switches the output of Generator 1 between left earphone, both earphones and right earphone. USE SCENARIO Testing of headphones, small loudspeakers and receivers Connector type: LEMO,
UA-2117 Generator Front Panel For 200 kHz LAN-XI Module
The UA-2117-011 is the default front panel for the 200 kHZ LAN-XI module Type 3161-A-011. USE SCENARIOS High-frequency sound and vibration measurements Underwater acoustics applications High-energy impact measurements High-frequency system excitation and transducer calibration The front panel has three different input connectors, BNC/ LEMO/ TNC, that allow connectivity for a
UA-2116 12 Channel Charge Input Front Panel
The UA-2116-120 allows up to 12 charge type transducers to be connected directly to the LAN-Xi front end, simplifying the setup and the performance. USE SCENARIOS Charge type transducers: Accelerometers, pressure sensors, hydrophones Combustion pressure monitoring on up to 12-cylinder engines High channel count charge accelerometer applications Ideal for high