eDAQ & eDAQ-lite - Rugged/Mobile
ELDIO/EXRL-DIO eDAQ-lite Digital Input-Output Layer
The Somat eDAQlite Digital Input/Output Layer (ELDIO) is an extremely versatile layer that can measure digital inputs/outputs, pulse counters, quadrature decoders, vehicle bus and GPS. The ELDIO offers eight channels that can be used as digital inputs/outputs with four additional channels for wide-range inputs.
Integrated in the digital channels are six configurable pulse counters. One layer can also support up to two independent vehicle bus interfaces via the use of Vehicle Bus Smart Modules.
The GPS communications port is designed to work with Somat GPS devices.
Product Specifications
Physical
- Size: 6.9″ W x 5.6″ L x 0.7″ H (18cm W x 14cm L x 2cm H)
- Weight: 0.91lbs (0.42kg)
- Temperature: -20° to 65° C
- Connectors: (6) Somat M8 Female Bulkhead Connector
Inputs
Digital Inputs/Outputs
- Number of Inputs: 8
- Voltage Ranges:
- Steady State: -0.2 to +45 VDC
- Short-Term Transients: -0.4 to +100 VDC
- Transducer Power: 5V or 12V @1A
- Threshold Voltage Accuracy: +/-20mV
- Input-switching threshold voltages are programmable
Wide-Range Digital Inputs
- Number of Inputs: 4
- Voltage Ranges:
- Steady State: -45 to +45 VDC
- Short-Term Transients: -100 to +100 VDC
- Transducer Power: 5V or 12V @1A
- Threshold Voltage Accuracy: +/-20mV
- Input-switching threshold voltages are programmable
Pulse Counters
- Number of Inputs: 6
- Pulse Counter Modes: Pulse Width Period, Pulse On Period, Pulse Rate and Quadrature Decoder
- Pulse Rate & Quadrature: Count Rising Edge Pulses for Inputs to 1MHz. Maximum Pulse Rate is over 4 Billion
- Pulse Width Period and Pulse on Period: Measured using s 5MHz clock (200 nSec resolution)
- Min Frequency Measurement Possible: .0012 Hz
Includes
(3) Somat SAC-TRAN-MP-2 Transducer Cables (2 m)
Product Options
Somat GPS Receiver (EDIO-5HZGPS)
The Somat GPS Receiver (EGPS-5HZ) is a commercial WAAS-enabled GPS receiver with a 5Hz update rate. The receiver continuously tracks and uses up to 12 satellites to compute and update position. Available channels include Latitude, Longitude, Altitude, Speed m/s, Speed MPH, Speed Knots, Heading, Year, Month, Day, Hour, Minute, Second, Nanosecond and Number of Satellites.
Part Number Code
The following number scheme is used to identify the layer configuration.
ELDIO – X
eDAQ Layer ELDIO
Options
- B = Base Layer
- 5HZGPS = 5Hz GPS Receiver