3D Testing
ARAMIS 3D Camera Systems
ARAMIS 3D Camera Systems
Robust design for high-end applications
For 3D Analyses Without Compromise
ARAMIS SRX is a high-resolution 3D camera system for full-field and point-based measurements. Up to 2000 frames per second, combined with high stability, process reliability and usability make ARAMIS SRX an ideal measuring system for high-end applications in industrial environments.
This Sensor Stands Up to Every Comparison
Highly resolving
The latest camera technology with two 12-megapixel cameras provides a high spatial resolution. That way, not only small strain but also local strain effects in large measuring areas can be measured.
Robust
The robust housing design gives stability to the sensor and at the same time reduces the need for sensor calibration for applications in industrial environments.
Fast
The system can be used out of the box. The exchangeable camera frame and preset and certified measuring lenses allow for a fast adjustment of measuring areas.
Reliable
Controlling the sensor using the GOM Testing Controller ensures stable communication between software and hardware. For a high process reliability of the sensor, image acquisition can be monitored by the trigger assignment within the cameras.
ARAMIS SRX: Ready for the Highest Requirements in the Field of Testing
High frequency for rapid applications
ARAMIS SRX has a maximum image recording rate of 335 fps at full resolution. By reducing the image height, the rate can be increased up to 2000 fps. This allows capturing an event such as the failure behavior of parts in detail over time.
Internal 8-gigabyte memory for high-end applications
ARAMIS SRX is designed for high-end applications, which require both capturing an event in detail over time and capturing local effects. The internal memory allows for a combination of high resolution and high speed.
HD mode for crash applications
The HD mode was developed especially for the use in crash applications. With an image recording rate of 1000 fps in HD resolution, this mode enables comprehensive analyses of fast processes.
State-Of-The-Art Light Technology
Blue Light Technology
Thanks to the narrow-band blue light of the Blue Light Technology, interfering ambient light during image acquisition can be filtered out. The light sources ensure optimal illumination with short exposure times for all measuring areas from 10 mm x 10 mm up to 5 m x 5 m.
Tracking Spots for larger measuring areas
The Tracking Spots serve for the illumination of large areas of up to 5 m x 5 m and are well suited for point-based motion analyses. The configuration with two light sources and reference point markers even allows for high-speed testing with exposure times in the range of microseconds.
Light projector for smaller measuring areas
The light projector is used for measuring areas of up to 1 m x 1 m and can be set for different illumination areas. The Blue Light Technology ensures a consistent light source for precise measurements in different environments.
Calibrated in a Few Minutes
The default calibration is supported by the software based on certified calibration objects and takes only a few minutes. The whole process is guided, ensuring very precise calibration results regardless of the user.
Technical Data for ARAMIS SRX
| ARAMIS SRX | ARAMIS SRX – 8 GB | |
| Camera resolution | 4096 × 3068 pixels | 4096 × 3068 pixels |
| Frame rate (fps) | 75 fps @ full resolution 115 fps @ 2/3 image height 230 fps @ 1/3 image height 480 fps @ 1/6 image height 490 fps @ HD format (1920 × 1000) |
335 fps @ full resolution 500 fps @ 2/3 image height 1000 fps @ 1/3 image height 2000 fps @ 1/6 image height 1000 fps @ HD format (1920 × 1000) |
| Camera support (mm) | 180 / 300 600 / 1200 / 1600 |
180 / 300 600 / 1200 / 1600 |
Accessories
- GOM Touch Probe
- Calibration object
- Reference point markers
- Deformation spray package
- Stand
- Transport case
The alternative with ideal speed and resolution for further demanding testing applications
Compared to ARAMIS SRX, the ARAMIS 3D Camera series is an alternative with a smaller scope of services. ARAMIS 3D Camera 12M and ARAMIS 3D Camera 2.3M are employed in research and industrial applications for measurements of small specimens up to large objects. Sensor setup, light management and calibration correspond to the configurations of the ARAMIS SRX system.
ARAMIS 3D Camera 12M: ideal resolution for medium-fast applications
With 12 megapixels and a maximum image recording rate of 25 fps at full resolution, the sensor has the proper resolution to reliably specify material characteristics in the field of materials and component testing, for example. By reducing the resolution, the image recording rate can be increased to 100 fps.
ARAMIS 3D Camera 2.3M: higher frame rates for fast application
The lower resolution of 2.3 megapixels allows for a higher image recording rate of 130 fps, making it the ideal solution for faster test object applications. By reducing the image height, the image recording rate can be increased up to 450 fps.
| ARAMIS 3D Camera 2.3M | ARAMIS 3D Camera 12M | |
| Camera resolution | 1936 × 1216 pixels | 4096 x 3000 pixels |
| Frame rate (fps) | 130 fps @ full resolution 240 fps @ 1/2 image height 450 fps @ 1/4 image height |
25 fps @ full resolution 75 fps @ 1/3 image height 100 fps @ binning |
| Camera support (mm) | 150 / 300 600 / 1200 / 1600 |
150 / 300 600 / 1200 / 1600 |
